• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.387-388
• /
• 2016

본 논문은 V2G를 위한 Bidirectional OBC를 제안한다. 상용화 시 적시 적용 가능한 높은 역/전송 효율의 Bidirectional OBC 전력회로를 제안하고 베터리 전력을 입력원으로 분산형 전력공급 장치에서 요구하는 품질을 만족하는 전력 생산을 위해 계통연계 회로 및 제어 기술을 제안한다. Bidirectional OBC의 PFC Type은 양방향 구현을 위해 기존 MOSFET과 Diode로 구현된 구조와 달리 모두 IGBT를 이용하여 Single Phase Inverter를 구현 하였으며, IGBT 이용 시 예측되는 Reverse Recovery Loss 개선을 위하여 Hybrid Switch 구조를 제안 하였다. Bidirectional OBC의 DC/DC Type은 전송 및 역송에 따라 Buck동작과 Boost 동작이 가능하도록 설계 하였고 Secondary LC Resonant Topology 가변구조법을 사용 하였다.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.82-85
• /
• 2007

전압과 전류에 민감한 장치설비에 대해 통합적으로 전력품질을 개선할 수 있는 3상 UPQC(Unified Power Quality Conditioner)는 전압의 변동을 보상하는 직렬형 인버터와 전류의 고조파를 보상하는 병렬형 인버터로 구성된다. 본 연구의 주안점은 종전의 3상 UPQC의 직렬형 인버터와 병렬형 인버터에 Z-소스 토폴로지를 적용하는 것이다. Z-소스 인버터의 shoot-through제어를 위해서는 simple boost control을 사용하였으며 shoot-through제어에 의하여 Z-소스 네트워크의 직류전압이 제어 가능하였다. 과도상태와 정상상태에서 전압과 전류 조건에 대한 PSIM시뮬레이션에 의해 제안된 시스템의 타당성을 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1566-1577
• /
• 2015

A novel high step-up converter is presented herein, which combines the conventional buck-boost converter, the charge pump capacitor and the coupling inductor. By doing so, a quite high voltage conversion ratio due to not only the turns ratio but also the duty cycle, so as to increase design feasibility. It is noted that the denominator of the voltage conversion ratio is the square of one minus duty cycle. Above all, there is no voltage spike across the switch due to the leakage inductance and hence no passive or active snubber is needed, and furthermore, the used switch is driven without isolation and hence the gate driving circuit is relatively simple, thereby upgrading the industrial application capability of this converter. In this paper, the basic operating principles and the associated mathematical deductions are firstly described in detail, and finally some experimental results are provided to demonstrate the effectiveness of the proposed high step-up converter.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.784-791
• /
• 2010

In this paper, a resonant pulse power converter (RPPC) is proposed. The proposed RPPC transfers the pulse-shape power from a DC source to a load periodically. The RPPC consists of a resonant circuit and a resonant pulse converter driven by a self-switching circuit. Depending on the magnitude difference between the input and output voltages, the operations of the RPPC are divided into 4 modes; boost mode, hybrid mode, direct mode and cut-off mode, respectively. The main switch of the RPPC turns on in the ZCS condition and off in the ZVS condition spontaneously. The operational principles of a RPPC using the self-switching technique are analyzed and verified in experiments. An example of a RPPC application is demonstrated in the area of thermoelectric energy harvesting.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.136-137
• /
• 2012

본 논문에서는 하이브리드 전기자동차의 전장시스템 에너지 공급을 위한 보조배터리 충전용 저전압 직류 변환장치(Low voltage DC-to-DC Converter, LDC)를 제안한다. 차량 탑재용의 특성상 소형 경량화 설계 기술을 통한 연비증가, 동력성능의 향상이 매우 중요하다. 본 논문에서 제안하는 LDC는 부스트와 포워드 컨버터 구조를 혼합한 형태로 부스트 컨버터의 입력 인덕터를 변압기로 대체하여 포워드 컨버터와 결합시킴으로서 출력전압의 승 강압 동작을 구현한다. 따라서 차량 시동 시 내연기관을 구동하기 위한 승압모드로 동작하고, 그 외 일반적인 경우는 차량 내 각종 전장부하에 전력을 공급하기 위한 강압모드로 동작된다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 PSIM을 이용한 시뮬레이션을 통해 타당성을 검증한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.735-737
• /
• 2017

An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.766-778
• /
• 2015

In this paper, we design a hybrid system for recognition and tracking realized with the aid of polynomial based RBFNNs pattern classifier and particle filter. The RBFNN classifier is built by learning the training data for diverse pose images. The optimized parameters of RBFNN classifier are obtained by Particle Swarm Optimization(PSO). Testing data for pose image is used as a face image obtained under real situation, where the face image is detected by AdaBoost algorithm. In order to improve the recognition performance for a detected image, pose estimation as preprocessing step is carried out before the face recognition step. PCA is used for pose estimation, the pose of detected image is assigned for the built pose by considering the featured difference between the previously built pose image and the newly detected image. The recognition of detected image is performed through polynomial based RBFNN pattern classifier, and if the detected image is equal to target for tracking, the target will be traced by particle filter in real time. Moreover, when tracking is failed by PF, Adaboost algorithm detects facial area again, and the procedures of both the pose estimation and the image recognition are repeated as mentioned above. Finally, experimental results are compared and analyzed by using Honda/UCSD data known as benchmark DB.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2035-2044
• /
• 2016

In order to match the voltages between high voltage battery stacks and low voltage super-capacitors with a high conversion efficiency in hybrid energy sources electric vehicles (HESEVs), a high ratio bidirectional DC-DC converter with a synchronous rectification H-Bridge is proposed in this paper. The principles of high ratio step-down and step-up operations are analyzed. In terms of the bidirectional characteristic of the H-Bridge, the bidirectional synchronous rectification (SR) operation is presented without any extra hardware. Then the SR power switches can achieve zero voltage switching (ZVS) turn-on and turn-off during dead time, and the power conversion efficiency is improved compared to that of the diode rectification (DR) operation, as well as the utilization of power switches. Experimental results show that the proposed converter can operate bidirectionally in the wide ratio range of 3~10, when the low voltage continuously varies between 15V and 50V. The maximum efficiencies are 94.1% in the Buck mode, and 93.6% in the Boost mode. In addition, the corresponding largest efficiency variations between SR and DR operations are 4.8% and 3.4%. This converter is suitable for use as a power interface between the battery stacks and super-capacitors in HESEVs.

• The Journal of Korea Robotics Society
• /
• v.5 no.2
• /
• pp.152-159
• /
• 2010

Finding a head of a person in a scene is very important for taking a well composed picture by a robot photographer because it depends on the position of the head. So in this paper, we propose a robust head tracking algorithm using a hybrid of an omega shape tracker and local binary pattern (LBP) AdaBoost face detector for the robot photographer to take a fine picture automatically. Face detection algorithms have good performance in terms of finding frontal faces, but it is not the same for rotated faces. In addition, when the face is occluded by a hat or hands, it has a hard time finding the face. In order to solve this problem, the omega shape tracker based on active shape model (ASM) is presented. The omega shape tracker is robust to occlusion and illuminationchange. However, whenthe environment is dynamic,such as when people move fast and when there is a complex background, its performance is unsatisfactory. Therefore, a method combining the face detection algorithm and the omega shape tracker by probabilistic method using histograms of oriented gradient (HOG) descriptor is proposed in this paper, in order to robustly find human head. A robot photographer was also implemented to abide by the 'rule of thirds' and to take photos when people smile.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.335-336
• /
• 2016

This paper introduces a bidirectional full-bridge converter with new active damp structure. The proposed active damp circuit can damp the oscillating voltage across the rectifier diodes with a smaller voltage stress of the damping capacitor and eliminate the circulating current. In addition, the proposed converter can achieve additional advantages such as nearly ZCS switching for leading-leg switches and no recovery current for rectifier-bridge by the suitable design of the damp capacitor to resonate with leakage inductor. Since the ZVS is achieved for both leading-leg and lagging-leg switches by the magnetizing current of the transformer, it can be achieved regardless of the load variation. A 3.3 kW prototype converter is implemented for vehicle-to-grid (V2G) application and the advantages of the proposed converter are verified by the experiments. The maximum efficiencies of 98.2% and 97.6% have been achieved for the buck mode and boost mode operation, respectively.