• 천문학회보
• /
• 제44권2호
• /
• pp.64.2-64.2
• /
• 2019

HD 81817 is known as a hybrid star. Hybrid stars have both cool stellar wind properties and UV or even X-ray emission features of highly ionized atoms in their spectra. A white dwarf companion has been suggested as the source of UV or X-ray features. HD 81817 has been observed since 2004 as a part of our radial velocity (RV) survey program to search for exoplanets around K giant stars using the Bohyunsan Observatory Echelle Spectrograph (BOES) at the 1.8 m telescope of Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. We obtained 84 RV measurements between 2004 and 2018 for HD 81817 and found two periodic RV variations. The obtained amplitudes of RV periods are around 200 m/s, which are significantly lower than that expected from a white dwarf companion. Furthermore, our re-analysis of the IUE spectra used by Reimers (1984) shows that the excess in UV emission can easily be explained by a pseudo-continuum of unresolved emission lines originating in the extended chromosphere of the star. We thus conclude that there are no companions of stellar mass to HD 81817. Meanwhile, we analyzed two periodicities in RV measurements and conclude that the period of 627.9 days is caused by intrinsic stellar activities based on H alpha equivalent width (EW) variations of a similar period. On the other hand, the period of 1047.8 days is likely to be caused by substellar companion which has a minimum mass of 27.6 M_JUP, a semi-major axis of 3.3 AU, and an eccentricity of 0.17 assuming the stellar mass of 4.3 M_⊙ for HD 81817. The inferred mass puts HD 81817 b in the brown dwarf desert.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2503-2508
• /
• 2010

ZnO thin films were grown on Si or $SiO_2$/Si substrates, at growth temperatures ranging from 150 to $400^{\circ}C$, by atomic layer deposition (ALD) using diethylzinc and water. Despite the large band gap of 3.3 eV, the ALD ZnO films show high n-type conductivity, i.e. low resistivity in the order of $10^{-3}\;{\Omega}cm$. In order to understand the high conductivity of ALD ZnO films, the films were characterized with X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, elastic recoil detection, Rutherford backscattering, Photoluminescence, and Raman spectroscopy. In addition, the various analytical data of the ZnO films were compared with those of ZnO single crystal. According to our analytical data, metallic zinc plays an important role for the high conductivity in ALD ZnO films. Therefore when the metallic zinc was additionally oxidized with ozone by a modified ALD sequence, the resistivity of ZnO films could be adjusted in a range of $3.8{\times}10^{-3}\;{\sim}\;19.0\;{\Omega}cm$ depending on the exposure time of ozone.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2573-2576
• /
• 2013

Rate capability and cyclability of $LiMn_2O_4$ should be improved in order to use it as a cathode material of lithium-ion batteries for hybrid-electric-vehicles (HEV). To enhance the rate capability and cyclability of $LiMn_2O_4$, it was coated with $MnV_2O_6$ by a sol-gel method. A $V_2O_5$ sol was prepared by a melt-quenching method and the $LiMn_2O_4$ coated with the sol was heat-treated to obtain the $MnV_2O_6$ coating layer. Crystal structure and morphology of the samples were examined by X-ray diffraction, SEM and TEM. The electrochemical performances, including cyclability at $60^{\circ}C$, and rate capability of the bare and the coated $LiMn_2O_4$ were measured and compared. Overall, $MnV_2O_6$ coating on $LiMn_2O_4$ improves the cyclability at high temperature and rate capability at room temperature at the cost of discharge capacity. The improvement in cyclability at high temperature and the enhanced rate capability is believed to come from the reduced contact between the electrode, and electrolyte and higher electric conductivity of the coating layer. However, a dramatic decrease in discharge capacity would make it impractical to increase the coating amount above 3 wt %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.440-443
• /
• 2002

Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.658-662
• /
• 1994

Ab initio and extended Huckel calculations have been applied to discuss the electronic structure, ring inversion barrier, and geometry of the $Cp_2TiS_3$ compound. The deformation of four membered ring in the planar geometry is originated from a second-order Jahn-Teller distortion due to the small energy gap between HOMO and LUMO on the basis of extended Huckel calculations. The puckered $C_s$ geometry is stabilized by the interaction of the $x^2-y^2$ metal orbital with the hybrid orbital in sulfur. Ab initio calculations have been carried out to explore the ring inversion process for the model $Cl_2TiS_3$ compound. We have optimized $C_s$ and $C_{2v}$ structures of the model compound at the RHF level. The energy barriers for the ring inversion are sensitive to the used basis set. With 4-31$G^*$ for the Cl and S ligands, the barriers are computed to be 8.41 kcal/mol at MP2 and 8.02 kcal/mol at MP4 level.

• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.10-14
• /
• 2003

In this paper, we have introduced the x-ray detector built with a CsI:Na scintillation layer deposited on amorphous selenium. To determine the thickness of the CsI:Na layer, we have estimated the transmission spectra and the absorption of continuous x-rays in diagnostic range by using computer simulation (MCNP 4C). A x-ray detector with 65 ${\mu}m$-CsI:Na/30 ${\mu}m$-Se layer has been fabricated by a thermal evaporation technique. SEM and PL measurements have been performed. The dark current and x-ray sensitivity of the fabricated detector has been compared with that of the conventional a-Se detector with 100 ${\mu}m$ thickness. Experimental results show that both detectors exhibit a similar dark current, which was of a low value below $400 pA/cm^2$ at 10 V/${\mu}m$. However, the CsI:Na-Se detector indicates high x-ray sensitivity, roughly 1.3 times that of a conventional a-Se detector. Furthermore, a CsI:Na-Se detector with an aluminium reflective layer shows a 1.8 times higher x-ray sensitivity than an a-Se detector. The hybrid type detector proposed in this work exhibits a low dark current and high x-ray sensitivity, and, in particular, excellent linearity to the x-ray exposure dose.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.416-419
• /
• 2002

There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. The one is using amorphous selenium as photoconductor and the other is using phosphor layer as a light conversion. But each two systems have strength and weakness such as high voltage and blurring effect. In this study, we investigated the electrical characteristic of $multi-layer\left(CaWO_{4}+a-Se \right)$ as a photoconductor according to the changing arsenic composition ratio. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. The arsenic composition ratio of a-Se compound is classified into 7 different kinds which have 0.1%, 0.3%, 0.5%, 1%, 1.5%, 5%, 10% and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 0.3% arsenic showed good characteristic of $2.45nA/cm^2$ dark current and $357.19pC/cm^2/mR$ net charge at $3V/{\mu}m$.

• 한국광학회지
• /
• 제30권4호
• /
• pp.142-145
• /
• 2019

일반적으로 체적형 방식의 디스플레이에는 큐브-모서리 재귀반사(corner cube retroreflector, CCRR)시트와 반투과 거울판이 사용되며, 이는 광원의 빛을 재귀반사시켜 부양영상(floating image)을 만든다. 이러한 기존 CCRR 방식은 광원의 강도를 1/4로 줄이는 반투막 투과 2회의 광손실과 각 단위 CCRR 크기에 의한 영상의 퍼짐 현상이 있다. 본 연구진이 제안하는 '혼성-병풍형' 구조 재귀반사(hybrid-t(transverse directional)-RRMA)는 광퍼짐을 최소화하여 부양영상의 품질을 향상시킬 뿐만 아니라, 광도를 4배로 높이며, 제작상의 편리함도 제공한다. '선형 v자 홈' (linear v-shaped groove)을 '포물선 v자 홈' (parabolic v-shaped groove)모양으로 조절한 재귀반사로 영상의 퍼짐을 개선하여 부양영상을 최적화하였고, '평면(flat wall) 재귀반사' 대신 '곡면(curved planar wall)-재귀반사' 구조를 적용한 '곡면-병풍형-재귀반사판'을 사용하여 반투과 거울판을 없애 반투막에 의한 광손실을 개선하고, 시스템을 단순화하였다.

• 대한기계학회논문집B
• /
• 제38권7호
• /
• pp.589-594
• /
• 2014

전기자동차와 하이브리드 자동차의 상용화에 따라 전기용량과 에너지 밀도가 향상된 리튬 이온 전지의 개발이 필요하다. 본 논문에서는 상장 모델을 이용하여 5산화 바나듐으로 구성된 다공성 구조물로의 리튬 이온 삽입현상을 분석하였다. 다공성 5산화 바나듐 구조물은 구멍을 갖는 구체의 구조물로 정의하였으며, 이때 구멍의 형상은 원통형이다. 원통형 구멍의 반지름, 깊이 및 개수를 조절하여 다양한 다공성 5산화 바나듐의 미세조직 형상을 고려하였으며, 각 미세조직의 형상인자와 구조물에 삽입되는 리튬 이온의 개수 사이의 관계를 분석하였다. 마지막으로 최적화 작업을 통하여 가장 많은 수의 리튬 이온이 삽입될 수 있는 다공성 5산화 바나듐의 구조체 형상을 찾아내었다.