• 한국주조공학회지
• /
• 제14권3호
• /
• pp.258-266
• /
• 1994

AC4A $Al/Al_2O_3+SiC_p$ hybrid composites were fabricated by the squeeze infiltration technique. Effect of applied pressure, volume fraction of reinforcement($Al_2O_3$ and SiC) and SiC particle size($4.5{\mu}m$, $6.5{\mu}m$ and $9.3{\mu}m$) on the solidification microstructure of the hybrid composites were examined. Mechanical properties were estimated preliminarly by fractographic observation, hardness measurement and wear test. Results show that the microstructure of the hybrid composites were quite satisfactory, namely revealing relatively uniform distribution of reinforcements and refined matrix. Some aggregation of SiC particle caused by particle pushing was observed especially in the hybrid composites containg in fine particle($4.5{\mu}m$). Refined matrix was attributed to applied pressure and increased nucleation sites with addition of reinforcements. Fractured facet also revealed finer for the hybrid composites possibly due to refined matrix. Hardness and wear resistance increased with volume fraction of reinforcements. For hybrid composites with $9.3{\mu}m$ SiC, hardness was somewhat lower and wear resistance higher than other composites.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.782-787
• /
• 2014

Due to the complicated steel structure and safety concern, it is very difficult to deploy wireless networks in power plants. This paper presents a hybrid network, named as $P^2HYMN$ (Power Plant HYbrid Maintenance Network), encompassing PLC (Power Line Communication), TLC (Telephone Line Communication), and Wireless LAN. The design goal of $P^2HYMN$ is to integrate multimedia data such as design drawings of control equipment, process data, and video image data for maintenance operation in electric power plants. A Multiplex Line Communication (MLC) device was designed and implemented to integrate PLC, TLC, and Wireless LAN into $P^2HYMN$. Performance test of $P^2HYMN$ has been conducted on a testbed under various conditions. The throughput of TLC was shown as 39 Mbps. Because the bandwidth requirement per camera is 8.5 Mbps on average, TLC is expected to support more thant four video camera at the same time.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• 한국정보과학회논문지:정보통신
• /
• 제36권6호
• /
• pp.481-491
• /
• 2009

본 논문에서는 라이브 미디어 스트리밍 서비스를 위한 하이브리드 P2P 오버레이 구조를 제안한다. 제안하는 구조는 가까운 지역에서 유사한 대역폭을 가진 피어들로 구성된 메시 오버레이와 메시 오버레이 구조를 기반으로 하여 세션 참여 안정성을 가진 피어들을 구성된 트리 오버레이로 이루어져 있다. 제안하는 방안에서는 메시 오버레이와 트리 오버레이를 유기적으로 활용함으로써 트리 오버레이 구조의 견고성과 메시 오버레이 구조의 롱지연을 보완한다. 또한, 트리 오버레이에서 동일 지역 내 업링크 대역폭이 높은 피어를 미디어 소스 피어 가까이에 위치시키며 트리의 깊이를 줄이고 넓를 넓혀서 스트림 전달의 지연을 최소화한다. 시뮬레이션을 통해, 제안하는 방안과 기존 연구의 성능을 확장성, 서비스 품질 등의 측면에서 평가해 보았다.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.83-91
• /
• 2022

본 논문은 영역 별로 부하가 관리되는 MMOG를 위해서 확장가능한 하이브리드 P2P 클라우드 구조를 제시한다. 게임 세계는 여러 게임 영역으로 분할되며 각 게임 영역은 이러한 MMOG 클라우드 환경에서 최소 한 개 이상의 피어 즉 플레이어에 의해 서비스된다. 특정 영역에 플레이어들의 수가 급증한 경우에도 그들의 상호 작용이 원활하게 지원되도록 부하는 영역별로 관리되어야 한다. 제시된 구조에서 자원 공급이 효율적으로 실현되며 플레이어들은 클라우드 서버와 효과적으로 상호 작용할 수 있고 기존의 클라이언트 서버 MMOG 구조에서의 병목 현상을 회피할 수 있다. 이 구조는 플레이어들의 처리 능력을 활용함으로써 클라우드에 있는 서버의 부하 즉 컴퓨팅 능력과 통신량을 절감하게 된다. 시뮬레이션 결과 제시된 하이브리드 P2P 클라우드 구조는 혼잡 지역 또는 핫스팟에서 플레이어들의 수에 따라 이용가능한 자원도 같이 증가됨에 따라 클라이언트 서버 구조에 비하여 서버의 통신 대역폭을 상당부분 감소시킬 수 있는 것으로 나타났다.

• 한국미생물·생명공학회지
• /
• 제14권3호
• /
• pp.209-212
• /
• 1986

YEp 13 plasmid에 B. amyloliquefaciens의 $\alpha$-amylase gene을 cloning시켜서 얻은 hybrid plasmid를 E. coli C 600으로 형질전환시켜서 amylase 활성을 나타내는 균주를 선별하였다. 선별된 E. coli C 600균주를 plasmid추출하여 전기영동해 본 결과 plasmid가 매우 불안정하였으며, 그중 가장 단순한 plasmid band를 지니고 있으며 amylase활성이 강한 E. coli균주를 선별하였다. 선별된 균주의 균체내에 있는 2개의 plasmid DNA를 분리하여 각각의 plasmid를 pTG 17-1, pTG 17-2로 명명하였으며 S. cerevisiae MC 16에서 형질전환이 가능한 pTG 17-2 DNA를 제한효소 EcoRI과 Pst I으로 restriction한 결과 EcoRI으로 처리한 경우는 7.3, 4.8, 2.4 kb인 3개의 분획으로 나타났으며 Pst I으로 처리한 경우는 linear로 14.5kb임을 알았으며 이로써 pTG 17-2 plasmid의 size가 약 14kb임을 알았다. 또한 E.coli균체내에서의 ampicillin sensitive로써 이 plasmid의 ampicillin resistance site가 결실되었음을 알았고 효모의 형진전환체로 부터의 $\alpha$-amylase는 균체외로 분비되지 않았고 효모균체내의 $\alpha$-amylase는 Somogyi-Nelson방법과 Agar diffusion 방법으로 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.116-119
• /
• 2000

A hybrid SOI bipolar-mode field effect transistor (BMFET) is proposed to improve the current gain. The device characteristics are analyzed and verified numerically for BMFET mode, DMOS mode, and hybrid mode by MEDICI simulation. The proposed SOI BMFET exhibits 30 times larger current gain in hybrid-mode operation by connecting DMOS gate to the p+ gate of BMFET structure as compared with the conventional structure without sacrifice of breakdown voltage and leakage current characteristics. This is due to the DMOS-gate-induced hybrid effect that lowers the barrier of p-body and reduces the charge in p-body.

• ETRI Journal
• /
• 제32권2호
• /
• pp.339-341
• /
• 2010

The fundamental transverse mode lasing of a hybrid laser diode is a prerequisite for efficient coupling to a single-mode silicon waveguide, which is necessary for a wavelength-division multiplexing silicon interconnection. We investigate the lasing mode profile for a hybrid laser diode consisting of silicon slab and InP/InGaAsP deep ridge waveguides. When the thickness of the top silicon is 220 nm, the fundamental transverse mode is lasing in spite of the wide waveguide width of $3.7{\mu}m$. The threshold current is 40 mA, and the maximum output power is 5 mW under CW current operation. In the case of a thick top silicon layer (1 ${\mu}m$), the higher modes are lasing. There is no significant difference in the thermal resistance of the two devices.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.386-394
• /
• 2016

Objective: The objective of the study was to evaluate the practicality and the validity of different surface treatments of self-drilling orthodontic mini-implants (OMIs) by comparing bone cutting capacity and osseointegration. Methods: Self-drilling OMIs were surface-treated in three ways: Acid etched (Etched), resorbable blasting media (RBM), partially resorbabla balsting media (Hybrid). We compared the bone cutting capacity by measuring insertion depths into artificial bone (polyurethane foam). To compare osseointegration, OMIs were placed in the tibia of 25 rabbits and the removal torque value was measured at 1, 2, 4, and 8 weeks after placement. The specimens were analyzed by optical microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Results: The bone cutting capacity of the etched and hybrid group was lower than the machined (control) group, and was most inhibited in the RBM group (p < 0.05). At 4 weeks, the removal torque in the machined group was significantly decreased (p < 0.05), but was increased in the etched group (p < 0.05). In the hybrid group, the removal torque significantly increased at 2 weeks, and was the highest among all measured values at 8 weeks (p < 0.05). The infiltration of bone-like tissue surface was evaluated by SEM, and calcium and phosphorus were detected via EDS only in the hybrid group. Conclusions: Partial RBM surface treatment (hybrid type in this study) produced the most stable self-drilling OMIs, without a corresponding reduction in bone cutting capacity.

• 대한치과의사협회지
• /
• 제47권7호
• /
• pp.444-454
• /
• 2009

The purpose of this study was to compare the shaping abilities of LightSpeed, ProTaper-Universal, and hybrid technique using S-series of ProTaper-Universal and LigthSpeed. The 72 simulated root canals of J-shape were used and classified as flowing 3 groups according to the instrumentation methods; Group P of 24 canal blocks were prepared with ProTaper-Universal, Group L was prepared with LightSpeed, and Group H was prepared with hybrid technique (initial shaping with ProTaper-Universal SI and S2 and apical shaping with LightSpeed from #25 to #50). A second-year resident of Endodontic department prepared the resin block canals to apical size #50 (F5 in Group P). The time lapses for instrumentation and the reduction of root canal curvature after shaping were measured. The pre- and post-instrumented root canals were scanned and superimposed to evaluate and calculate the increased canal width and apical centering ratio. The results were as followings: Group Land H showed significant less instrumentation time than Group P (p < 0.05). The ProTaper system showed greater reduction of root canal curvature and working length diminishment than other methods (p < 0.05). LightSpeed system showed best canal curvature preserving characteristics. The Group P had greater instrumented widths at all levels examined (p < 0.05). Group L and Group H showed lower centering ratio (ability to preserve the canal center; the lower ratio means the better canal center preservation) than Group P (p < 0.05). Group H had the lowest centering ratio at the 1 mm level.