• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.260-262
• /
• 2006

This paper presents Hybrid-PI controller of induction motor drive using fuzzy control. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness, fixed gain PI controller, Hybrid-PI controller proposes a new method based self tuning PI controller. Hybrid-PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of induction motor are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.75-81
• /
• 1999

In this paper, the details of electronically controlled CVT is described , which Kia Motor company recently developed in prototype form for hybrid passenger car. This transmission has two input shafts, one for engine and the other for traction motor. The shaft for traction motor is located at rear side which is extended from primary pulley shaft and connected to traction motor through adapter gear box. Adopting two input system, various driving mode is available such as motor alone driving in hybrid vehicle application. As far as electrohydraulic system concerned , this transmission uses two bleed type variable force solenoids for line pressure and ratio control, and one on-off solenoid for clutch control. Another feature for this transmission is that oil pump for transmission is separate from CVT for supplying oil pressure even at vehicle standstill.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.51-54
• /
• 1991

The effect of inductance for optimal design of Hybrid permanent magnet step motor is presented on this paper. A pull-out torque of Hybrid permanent magnet step motor is measured and calculated by varying stator coil inductances, and power consumption of the step motor also is calculated and compared to the measured value. The relation of developed torque to parer consumption by the changing of magnetomotive force magnitude in a rotor permanent magnet is studied, which is the essence of the step motor design.

• 대한전기학회논문지
• /
• 제38권1호
• /
• pp.1-9
• /
• 1989

In this paper, an efficient method of a hybrid stepping motor is proposed using permeance method. To be specific, hybrid stepping motor is modelled firstly as an equivalent nonlinear magnetic circuit including the saturation effects of iron parts, and then the static holding torque of the motor is calculated as a function of each design factor via Newton-Raphson's method. To show the validities of the proposed method, a prototype of hybrid stepping motor for 5 1/4 inches FDD header drive is made and tested in laboratory. As a result, the experimental data for the static holding torque is shown to be within 10% error compared with that of the simulated results.

• 한국실천공학교육학회논문지
• /
• 제3권2호
• /
• pp.100-105
• /
• 2011

HIL(Hardware-in-the-Loop) 개념을 적용하면 하이브리드 자동차용 부품의 자동차 환경에서의 특성을 부품을 차량에 장착하지 않고도 평가 할 수 있게 된다. 본 논문에서는 특정 전동기를 하이브리드 자동차용 전동기로 사용하였을 경우 자동차의 구동 특성을 분석할 수 있는 HIL 방식을 구현하기 위한 부품 특성 시험. 구동특성 시뮬레이션, 장치 구성 방법을 설명한다. 시험장치는 자동차 시뮬레이터, 부하장치로 구성되며 시뮬레이션에서 사용된 차량제어기를 직접 차량제어기로 사용하게 된다. 부하장치는 차량의 동적 특성을 모의하게 된다. 특히 기존의 차량의 관성을 모의하기 위한 기계적 관성부하를 사용하지 않고 부하장치를 능동적으로 제어 하여 차량에 적용되었을 경우의 전동기 특성을 구할 수 있다. 시험 전동기가 병렬방식 하이브리드 자동차에 적용되었을 경우의 전동기의 실제 특성을 구할 수 있다. 제안된 방식은 하이브리드 자동차의 구동 특성을 교육하기 위한 교육매체로 사용 될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.99-106
• /
• 1995

PWM(Pluse Width Modulation) induction motor drives are being used in greater numvers through a wide variety of industrial and commercial applications. In this paper, a new speed control algorithm (hybrid algorithm) for induction motor drives that uses regular sampled PWM and harmonic elimination PWM is presented. The hybrid algorithm in implemeted on the computer to obtain solutions from the calculation equations of the width of the pulses and the firing angles for the selected harmonic elimination. this paper describes the time delay effects and the suitable compensating methods moreover, optical transmission system for driving signals is proposed and is compared with general trnasmission system. The hybrid inverter was tested with induction motor, and these test results are shown that this hybrid inverter closely approximates and exhibits many of the desirable performance characteristic distortions and eliminated the objectionable harmonics. Finally, detailed experimental investigation of the proposed hybrid scheme in presented.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.524-527
• /
• 2004

Hybrid rocket had many advantage with compared to solid and liquid rockets. However, the engines have not yet been used in practical rocket systems, due mainly to the disadvantage of hybrid combustion, such as low fuel regression rate. In this study, lab-scale hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Test firings with thrusts up to 300 N were conducted with GOX and transparent PMMA. Thrust was calculated with the pressure of the combustion chamber and the regression rate was measured in with variation of oxidizer flow rate. The regression rates showed a strong dependency on GOX mass flux. The frequency analysis technique of the bulk-mode oscillation of motor was applied to a hybrid rocket motor and was based on the principle that this frequency was inversely proportional to the square root of the chamber volume. Several problems and solutions of operating hybrid rocket were presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.149-151
• /
• 2009

Hybrid electric vehicle has three operating mode, depending on the operation of the engine and electric motor. According to the speed range of BLDC motor, In hybrid traction mode, both the engine and electric motor deliver to drive train. Battery charge mode, the electric motor operates as generator and is driven by the engine to charge the batteries. In engine alone traction mode, the electric motor is do-energized, and vehicle is propelled by the engine alone. we propose hysteresis current control technique to maintain constant speed in the motor load torque at the reverse direction. The proposed method is verified by using Matlab Simulink software.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.930-937
• /
• 2013

In this paper, a motor control algorithm for performing a mode change without an integrated starter generator (ISG) is suggested for the automatic transmission-based hybrid electric vehicle (HEV). Dynamic models of the HEV powertrains such as engine, motor, and mode clutch are derived for the transient state during the mode change, and the HEV performance simulator is developed. Using the HEV performance bench tester, the characteristics of the mode clutch torque are measured and the motor torque required for the mode clutch synchronization is determined. Based on the dynamic models and the mode clutch torque, a motor torque control algorithm is presented for mode changes, and motor control without the ISG is investigated and compared with the existing ISG control.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.100-108
• /
• 2003

This paper proposes a flywheel hybrid vehicle to solve the energy crisis problem by the exhaustion of a fossil fuel and air pollution for the conservation of environment. The proposed flywheel hybrid vehicle is composed of an accumulator and a flywheel as the energy generation and storage component and three variable displacement hydraulic pump/motors as the energy transfer devices. Flywheel has the characteristics of high energy density and easy energy absorption and consumption. The effectiveness of the energy-saving of the proposed flywheel hybrid vehicle is verified by simulation using Matlab/simulink. First of ail, analytical modeling for the flywheel hybrid vehicle is presented and simulations are performed based on the experimental efficiency data of a variable displacement pump/motor. The results of the simulation show that the effect of energy savings is realized by the proposed hybrid vehicle in 3 different city driving patterns.