• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Structural Engineering and Mechanics
• /
• v.36 no.6
• /
• pp.759-783
• /
• 2010

In this paper, compressive strength of carbon fiber reinforced polymer (CFRP) confined concrete cylinders is formulated using a hybrid method coupling genetic programming (GP) and simulated annealing (SA), called GP/SA, and a robust variant of GP, namely multi expression programming (MEP). Straightforward GP/SA and MEP-based prediction equations are derived for the compressive strength of CFRP-wrapped concrete cylinders. The models are constructed using two sets of predictor variables. The first set comprises diameter of concrete cylinder, unconfined concrete strength, tensile strength of CFRP laminate, and total thickness of CFRP layer. The most widely used parameters of unconfined concrete strength and ultimate confinement pressure are included in the second set. The models are developed based on the experimental results obtained from the literature. To verify the applicability of the proposed models, they are employed to estimate the compressive strength of parts of test results that were not included in the modeling process. A sensitivity analysis is carried out to determine the contributions of the parameters affecting the compressive strength. For more verification, a parametric study is carried out and the trends of the results are confirmed via some previous studies. The GP/SA and MEP models are able to predict the ultimate compressive strength with an acceptable level of accuracy. The proposed models perform superior than several CFRP confinement models found in the literature. The derived models are particularly valuable for pre-design purposes.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.110-124
• /
• 1993

A Nonlinear model-based Hybrid Controller (NHC) is developed which consists of the adaptive proportional-integral-feedforward (PIF) gains and variable structure controller. The controller has the robustness against modeling uncertainty and is applied to the trajectory tracking control of single-input, single-output nonlinear systems. The essence of the scheme is to divide the control into four different terms. Namely, the adaptive P-I-F gains and variable structure controller are used to accomplish the specific control actions by each terms. The robustness of the controller is guaranteed by the feedback of estimated uncertainty and the performance specification given by the adaptation of PIF gains using the second method of Lyapunov. The variable structure controller is incorporated to regulate the initial peak of the tracking error during the parameter adaptation is not settled yet. The newly developed NHC method is applied to the power tracking control of a nuclear reactor and the simulation results show great improvement in tracking performance compared with the conventional model-based control methods.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.891-898
• /
• 1992

When catilever beams rotate about axes perpendicular to the underformed beam's longitudinal axis, their bending stiffnesses change due to the stretching caused by centrifugal inertia forces. Such phenomena result in variations of natural frequencies and mode shapes associated with constant speed rotational motions of the beams. These variations are important in many practical applications such as helicopter blades, turbomachines, and space structures. This paper presents the formulation of a set of linear equations governing the lateral motion of rotating cantilever beams. These equations can be used to provide accurate predictions of the variations of natural frequencies and mode shapes associated with constant speed rotational motions of the beams. These variations are important in many practical applications such as helicopter blades, turbomachines, and space structures. This paper presents the formulation of a set of linear equations governing the lateral motion of rotating cantilever beams. These equations can be used to provide accurate predictions of the variations of natural frequencies and mode shapes due to rotation. This technique is simpler and more consistent than other conventional techniques which are commonly used in the literature.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.74-79
• /
• 1996

This paper describes a methodology for the development of models of discrete event system(DES). The methodology is based on transformation of continuous state space into discrete one to homomorphically represent dynamics of continuous processes in discrete events. This paper proposes a formal structure which can couple DES models within a framework. The structure employs the DEVS formalism for the DES models. The proposed formal structure has been applied to develop a DEVS model for the human cardiovascular system. For this, the cardiac cycle is partitioned into a set of phases based on events identified through VisSim simulation in the CS of the electrical analog model. VisSim is the simulation tool of visual environment for developing continuous, discrete, and hybrid system models and performing dynamic simulation. For each phase, a CS of the electrical analog model for the cardiovascular system has been simulated by VisSim 2.0. To validate this model, first develop the DEVS model, then simulate the model in the DEVSIM++ environment. It has same simulation results for the data obtained from the CS simulation using VisSim. The comparison shows that the DEVS model represents dynamics of the human heart system at each phase of cardiac cycle.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1511-1519
• /
• 2014

The objective of this paper is to propose a modelling of a small compressed air energy storage system, which drives an induction generator based on a field-oriented control (FOC) principle for a renewable power generation. The proposed system is a hybrid technology of energy storage and electrification, which is developed to use as a small scale of renewable energy power plant. The energy will be transferred from the renewable energy resource to the compressed air energy by reciprocating air compressor to be stored in a pressurized vessel. The energy storage system uses a small compressed air energy storage system, developed as a small unit and installed above ground to avoid site limitation as same as the conventional CAES does. Therefore, it is suitable to be placed at any location. The system is operated in low pressure not more than 15 bar, so, it easy to available component in country and inexpensive. The power generation uses a variable speed induction generator (IG). The relationship of pressure and air flow of the compressed air, which varies continuously during the discharge of compressed air to drive the generator, is considered as a control command. As a result, the generator generates power in wide speed range. Unlike the conventional CAES that used gas turbine, this system does not have any combustion units. Thus, the system does not burn fuel and exhaust pollution. This paper expresses the modelling, thermodynamic analysis simulation and experiment to obtain the characteristic and performance of a new concept of a small compressed air energy storage power plant, which can be helpful in system designing of renewable energy electrification. The system was tested under a range of expansion pressure ratios in order to determine its characteristics and performance. The efficiency of expansion air of 49.34% is calculated, while the efficiency of generator of 60.85% is examined. The overall efficiency of system of approximately 30% is also investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.193-203
• /
• 2014

Temperature-dependent stress analysis and heat transfer analysis of a rotating gas turbine blade made of functionally graded materials (FGMs) are presented considering turbine operating temperature and ceramic particle size. The material properties of functionally graded materials are assumed to vary continuously and smoothly across the thickness of the thin-walled blade. For obtaining system stiffness reflecting these characteristics, the one-dimensional heat transfer equation is applied along the thickness of the thin-walled blade for determining the temperature distribution. Using the results of the temperature analysis, the equations of motion of a rotating blade are derived with hybrid deformation variable modeling method along with the Rayleigh-Ritz assumed mode methods. The validity of the derived rotating blade model is evaluated by comparing its transient responses and temperature distribution with the results obtained using a commercial finite element code. The maximum tensile stress with operating speed and gradient index are obtained. Furthermore, the gradient index that minimizes blade temperature was investigated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.43-43
• /
• 2015

천수방정식을 사용하는 초기 수치모형은 프로드수($F_4$)가 변화하는 흐름 즉, 상류방향과 하류방향으로 전파하는 홍수파를 동시에 해석하기 위해 중앙 차분기법이 필요한 상류(sub-critical flow)와 흐름방향에 따른 상류이송(upwinding)기법이 필요한 사류(super-critical flow)가 나타나는 흐름해석에서 어려움이 있었다. 하지만, 근사 Riemann 해법의 등장으로 흐름방향에 관계없이 특성선을 따라 정확한 상향가중기법의 적용이 가능하게 되어, 천수방정식을 지배방정식으로 하는 수치모형이 더욱 실용적으로 적용될 수 있도록 하였다. 따라서, 현재 근사 Riemann 해법은 Godunov 형 유한체적 기법, 불연속 Galerkin 혹은 Petrov-Galerkin 유한요소기법 그리고 Boussinesq 기법에도 적용되고 있으며, 특히 Godunov 형 유한체적기법과 결합한 근사 Riemann 해법은 댐 붕괴, 하천 범람 그리고 도시 및 해안지역 침수에 이르기까지 여러 가지 문제에 폭넓게 적용되고 있다. 지금까지 홍수 모델링에 적용된 Godunov형 유한체적모형은 정형 사각격자나 비정형 삼각격자 중에서 한가지의 격자 종류만을 적용한 연구가 주로 수행되었으며, 유한요소모형과 같이 이 두 가지 격자를 동시에 적용한 연구는 거의 이루어지지 않고 있다. 일반적으로, 삼각격자는 사각격자와 는 달리 연구유역의 경계나 지형이 복잡한 경우에도 큰 노력없이 격자의 생성이 가능하나, 격자와 노드의 수가 사각격자보다 많아 계산시간이 많이 소요되는 단점이 있다. 반면, 사각격자는 하천과 같이 선형으로 변하는 지형에 대해서는 표현하기가 용이하며 계산시간의 효율성도 뛰어나다. 본 연구에서는 하천, 도시 그리고 해안지역에서의 효율적이고 정확한 홍수 모델링을 위해 삼각 및 사각격자 그리고 이 두 격자를 동시에 고려한 하이브리드 격자의 적용이 가능한 Godunov형 2차원 유한체적 모형을 개발하였다. 그리고 개발모형을 정확해가 있는 댐 붕괴 문제, 실측치가 존재하는 실험하도 및 실제하도에 삼각, 사각 그리고 혼합격자를 생성하여 모의를 수행하고, 각 적용 격자에 따른 정확성과 효율성 및 장점과 단점을 연구하였다.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3902-3909
• /
• 2021

SACOS series of subchannel analysis codes have been developed by XJTU-NuTheL for many years and are being used for the thermal-hydraulic safety analysis of various reactor cores. To achieve fine whole core pin-level analysis, the input preprocessing and parallel capabilities of the code have been developed in this study. Preprocessing is suitable for modeling rectangular and hexagonal assemblies with less error-prone input; parallelization is established based on the domain decomposition method with the hybrid of MPI and OpenMP. For domain decomposition, a more flexible method has been proposed which can determine the appropriate task division of the core domain according to the number of processors of the server. By performing the calculation time evaluation for the several PWR assembly problems, the code parallelization has been successfully verified with different number of processors. Subsequent analysis results for rectangular- and hexagonal-assembly core imply that the code can be used to model and perform pin-level core safety analysis with acceptable computational efficiency.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.53-72
• /
• 2019

Safety measures for tower cranes are extremely important among the seismic countermeasures at high-rise building construction sites. In particular, the collapse of a tower crane from a high position is a very serious catastrophe. An example of such an accident due to an earthquake is the case of the Taipei 101 Building (the author was the project director), which occurred on March 31, 2002. Failure of the bolted joints of the tower-crane mast was the direct cause of the collapse. Therefore, it is necessary to design for this eventuality and to take the necessary measures on construction sites. This can only be done by understanding the precise dynamic behavior of mast joints during an earthquake. Consequently, we created a new hybrid-element model (using beam, shell, and solid elements) that not only expressed the detailed behavior of the site joints of a tower-crane mast during an earthquake but also suppressed any increase in the total calculation time and revealed its behavior through computer simulations. Using the proposed structural model and simulation method, effective information for designing safe joints during earthquakes can be provided by considering workability (control of the bolt pretension axial force and other factors) and less construction cost. Notably, this analysis showed that the joint behavior of the initial pretension axial force of a bolt is considerably reduced after the axial force of the bolt exceeds the yield strength. A maximum decrease of 50% in the initial pretension axial force under the El Centro N-S Wave ($v_{max}=100cm/s$) was observed. Furthermore, this method can be applied to analyze the seismic responses of general temporary structures in construction sites.