• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.205-210
• /
• 2014

Recently, pattern recognition methods have been widely used by researchers for fault diagnoses of mechanical systems. A pattern recognition method determines the soundness of a mechanical system by detecting variations in the system's vibration characteristics. Hidden Markov models (HMMs) and artificial neural networks (ANNs) have recently been used as pattern recognition methods in various fields. In this study, a HMM-ANN hybrid method for the fault diagnosis of a mechanical system is introduced, and a rotating wind turbine blade with a crack is selected for fault diagnosis. The existence, location, and depth of said crack are identified in this research. For improving the diagnostic accuracy of the method in spite of the presence of noise, a moment with a few specific frequencies is applied to the structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.193-203
• /
• 2014

Temperature-dependent stress analysis and heat transfer analysis of a rotating gas turbine blade made of functionally graded materials (FGMs) are presented considering turbine operating temperature and ceramic particle size. The material properties of functionally graded materials are assumed to vary continuously and smoothly across the thickness of the thin-walled blade. For obtaining system stiffness reflecting these characteristics, the one-dimensional heat transfer equation is applied along the thickness of the thin-walled blade for determining the temperature distribution. Using the results of the temperature analysis, the equations of motion of a rotating blade are derived with hybrid deformation variable modeling method along with the Rayleigh-Ritz assumed mode methods. The validity of the derived rotating blade model is evaluated by comparing its transient responses and temperature distribution with the results obtained using a commercial finite element code. The maximum tensile stress with operating speed and gradient index are obtained. Furthermore, the gradient index that minimizes blade temperature was investigated.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.421-430
• /
• 2003

The extraction technique for Doppler information(Doppler centroid frequency(f$_{dc}$) and it's rate(f$_{r}$) is very important to make an image from the radar echo signal data. Clutterlock and auto-focusing techniques have been widely used to extract accurate Doppler information. But both techniques are not easy to implement in SAR processor and need quite lots of time to calculate accurate f$_{dc}$ and f$_{r}$ because they are generally based on echo signal data only. In this paper we suggest hybrid method for Doppler extraction using both of echo signal data and orbital and attitude information of satellite. In this method CDE(Correlation Doppler Estimation) technique is only used to estimate exact modular f$_{dc}$ using received echo signal data and rest of other algorithms are based on simple mathematical model of geometry between satellite and ground targets as well as the Doppler frequency ambiguity resolving problem. The experimental results using Radarsat-1 signal data shows that the proposed method can be effectively used for the extraction of Doppler information.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.43-43
• /
• 2015

천수방정식을 사용하는 초기 수치모형은 프로드수($F_4$)가 변화하는 흐름 즉, 상류방향과 하류방향으로 전파하는 홍수파를 동시에 해석하기 위해 중앙 차분기법이 필요한 상류(sub-critical flow)와 흐름방향에 따른 상류이송(upwinding)기법이 필요한 사류(super-critical flow)가 나타나는 흐름해석에서 어려움이 있었다. 하지만, 근사 Riemann 해법의 등장으로 흐름방향에 관계없이 특성선을 따라 정확한 상향가중기법의 적용이 가능하게 되어, 천수방정식을 지배방정식으로 하는 수치모형이 더욱 실용적으로 적용될 수 있도록 하였다. 따라서, 현재 근사 Riemann 해법은 Godunov 형 유한체적 기법, 불연속 Galerkin 혹은 Petrov-Galerkin 유한요소기법 그리고 Boussinesq 기법에도 적용되고 있으며, 특히 Godunov 형 유한체적기법과 결합한 근사 Riemann 해법은 댐 붕괴, 하천 범람 그리고 도시 및 해안지역 침수에 이르기까지 여러 가지 문제에 폭넓게 적용되고 있다. 지금까지 홍수 모델링에 적용된 Godunov형 유한체적모형은 정형 사각격자나 비정형 삼각격자 중에서 한가지의 격자 종류만을 적용한 연구가 주로 수행되었으며, 유한요소모형과 같이 이 두 가지 격자를 동시에 적용한 연구는 거의 이루어지지 않고 있다. 일반적으로, 삼각격자는 사각격자와 는 달리 연구유역의 경계나 지형이 복잡한 경우에도 큰 노력없이 격자의 생성이 가능하나, 격자와 노드의 수가 사각격자보다 많아 계산시간이 많이 소요되는 단점이 있다. 반면, 사각격자는 하천과 같이 선형으로 변하는 지형에 대해서는 표현하기가 용이하며 계산시간의 효율성도 뛰어나다. 본 연구에서는 하천, 도시 그리고 해안지역에서의 효율적이고 정확한 홍수 모델링을 위해 삼각 및 사각격자 그리고 이 두 격자를 동시에 고려한 하이브리드 격자의 적용이 가능한 Godunov형 2차원 유한체적 모형을 개발하였다. 그리고 개발모형을 정확해가 있는 댐 붕괴 문제, 실측치가 존재하는 실험하도 및 실제하도에 삼각, 사각 그리고 혼합격자를 생성하여 모의를 수행하고, 각 적용 격자에 따른 정확성과 효율성 및 장점과 단점을 연구하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.125-125
• /
• 2016

남강 권역은 5개의 단위유역으로 구성되어 있으며, 남강A, 남강B, 남강C, 남강D와 남강E로 명명되고 1단계 수질오염총량관리제도 시행 이후 유역 내 개발 등으로 인한 오염원이 증가하고 장기간 퇴적된 저니층으로부터 오염물질이 용출되는 등 수질의 자정능력보다 더 많은 오염물질이 수체내로 유입됨으로써 수질이 악화되자 수량확보 뿐만 아니라 남강의 수질관리에 대해서 관심을 가지기 시작하였다(GNDI, 2010). 남강 하류수계는 하상구배가 매우 완만하며 유속이 느리다. 따라서 물의 체류시간이 호수와 비슷한 양상을 보이고 있다. 더욱이 남강 하류수계는 주변의 도시와 농경지로부터 물의 소모량이 크기 때문에 하류수계의 물의 흐름이 더욱 완만해지고 이로 인하여 수질 악화가 가속화되고 수역의 영양단계가 점점 증가하는 부영양화현상이 발생되고 있다. 남강하류수계와 같이 부영양화 된 수계내의 미처리 된 영양염을 이용한 식물플랑크톤의 생산에 의해 자생BOD가 공급된다. 따라서 남강댐 하류지역과 같은 수리 수문학적 특징을 가진 유역은 수질관리를 위해서 특정 수역에 유입 BOD와 자생 BOD가 어느 정도 기여하는가를 정량적으로 파악한 후, 기여도에 따라 오염원인 물질을 줄이기 위한 수질관리 방안이 설정되어야 한다. 본 연구에서는 남강유역의 오염원의 기여율 분석을 위해 하천수질모델인 QUALKO2를 사용하였으며, 점오염원 뿐만 아니라 수질에 상당한 영향을 끼치는 비점오염원의 영향을 통합적으로 고려하기 위하여 유역 모델인 SWAT과의 연계방안을 제시하였다. 또한 모델의 연계 적용을 통해 산정된 내부오염원과 내부오염원의 기여율과 수질측정결과를 활용하여 분석한 기여도와의 비교를 수행하여 신뢰성을 확보하였다.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.283-296
• /
• 2010

During the disinfection of potable water, humic substances present in the solution react with chlorine to form potential carcinogenic compounds. This study evaluates the feasibility of using a submerged membrane photocatalysis reactor (SMPR) process for treatment of humic substances through the characterization of both organic removal efficiency and membrane hydraulic performance. A simple SMPR was operated and led to the removal of up to 83% of the polluting humic matters. Temporal rates of organic removal and membrane fouling were found to decrease with filtration time. Using tighter membrane in the hybrid process resulted in not only higher organic removal, but also more significant membrane fouling. Under the experimental conditions tested, optimum $TiO_2$ concentration for humic removal was found to be 0.6 g/L, and increasing initial pollutant concentration expectedly resulted in a more substantial membrane fouling. The importance of the influent nature and pollutant characteristics in this type of treatment was also assessed as various water sources were tested (model humic acid solution vs. local water containing natural organic matters). Results from this study revealed the promising nature of the SMPR process as an alternative technique for organic removal in the existing water treatment system.

• Steel and Composite Structures
• /
• v.23 no.4
• /
• pp.409-420
• /
• 2017

This paper theoretically studies the cyclic behavior of hybrid connections between steel coupling beams and concrete shear walls with embedded steel columns. Finite element models of connections with long and short embedded steel columns are built in ABAQUS and validated against the test results in the companion paper. Parametric studies are carried out using the validated FE model to determine the key influencing factors on the load-bearing capacity of connections. A close-form solution of the load-bearing capacity of connections is proposed by considering the contributions from the compressive strength of concrete at the interface between the embedded beam and concrete, shear yielding of column web in the tensile region, and shear capacity of column web and concrete in joint zone. The results show that the bond slip between embedded steel members and concrete should be considered which can be simulated by defining contact boundary conditions. It is found that the loadbearing capacity of connections strongly depends on the section height, flange width and web thickness of the embedded column. The accuracy of the proposed calculation method is validated against test results and also verified against FE results (with differences within 10%). It is recommended that embedded steel columns should be placed along the entire height of shear walls to facilitate construction and enhance the ductility. The thickness and section height of embedded columns should be increased to enhance the load-bearing capacity of connections. The stirrups in the joint zone should be strengthened and embedded columns with very small section height should be avoided.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.51-62
• /
• 2021

This study developed the factors capable of systematic/comprehensive evaluation of the task performance in order to strengthen the performance management of the professional career personnel invitation program (PCPIP). To this end, a performance evaluation framework was developed by analyzing existing project evaluation studies based on boundary theory and Kirkpatrick's four-level evaluation model. Afterwords, through two Delphi surveys, evaluation factors that can measure performance in terms of individual and invitation institutions of PCP were derived and validated. With this procedure, five evaluation factors were finally selected: adaptability, connectivity, clarity, compatibility, and expandability. This study has implications suggesting a performance evaluation factors capable of hybrid quantitative/qualitative evaluation for the performance management of PCPIP operated by National Research Foundation of Korea Research since 1994.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3902-3909
• /
• 2021

SACOS series of subchannel analysis codes have been developed by XJTU-NuTheL for many years and are being used for the thermal-hydraulic safety analysis of various reactor cores. To achieve fine whole core pin-level analysis, the input preprocessing and parallel capabilities of the code have been developed in this study. Preprocessing is suitable for modeling rectangular and hexagonal assemblies with less error-prone input; parallelization is established based on the domain decomposition method with the hybrid of MPI and OpenMP. For domain decomposition, a more flexible method has been proposed which can determine the appropriate task division of the core domain according to the number of processors of the server. By performing the calculation time evaluation for the several PWR assembly problems, the code parallelization has been successfully verified with different number of processors. Subsequent analysis results for rectangular- and hexagonal-assembly core imply that the code can be used to model and perform pin-level core safety analysis with acceptable computational efficiency.

• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.875-888
• /
• 2018

Tulip (Tulipa L.) is one of the most important ornamental geophytes in the world. Analysis of molecular variability of tulips is of great importance in conservation and parental lines selection in breeding programs. Of the 70 genic microsatellites, 15 highly polymorphic and reproducible markers were used to assess the genetic diversity, structure, and relationships among 280 individuals of 36 wild and cultivated tulip accessions from two countries: Iran and the Netherlands. The mean values of gene diversity and polymorphism information content were 0.69 and 0.66, respectively, which indicated the high discriminatory power of markers. The calculated genetic diversity parameters were found to be the highest in wild T. systola Stapf (Derak region). Bayesian model-based STRU CTU RE analysis detected five gene pools for 36 germplasms which corresponded with morphological observations and traditional classifications. Based on analysis of molecular variance, to conserve wild genetic resources in some geographical locations, sampling should be performed from distant locations to achieve high diversity. The unweighted pair group method with arithmetic mean dendrogram and principal component analysis plot indicated that among wild tulips, T. systola and T. micheliana Hoog exhibited the closest relationships with cultivated tulips. Thus, it can be assumed that wild tulips from Iran and perhaps other Middle East countries played a role in the origin of T. gesneriana, which is likely a tulip species hybrid of unclear origin. In conclusion, due to the high genetic variability of wild tulips, they can be used in tulip breeding programs as a source of useful alleles related to resistance against stresses.