• 한국작물학회지
• /
• 제39권3호
• /
• pp.262-269
• /
• 1994

본 연구는 잡종 강세 정도가 다른 벼 F$_1$과 양친품종들의 생장 특성 및 다수성 요인을 구명하고자 Indica와 Japonica에서 각각 F$_1$의 잡종강세가 큰 것과 작은 것 그리고 이들의 양친 등 10개 품종을 공시하여 생육 시기별 생장 특성, 질소 함량과 공간적 분포, 흡광계수, 광합성 속도, 수량 및 수량 구성요소에 대하여 검토한 결과는 다음과 같다. 1. F$_1$의 잡종강세가 나타나는 수량 구성요소는 수수와 수당 영화수였으며, 단위 면적당 영화수는 양자의 Heterosis가 상승적으로 작용하여 가장 큰 잡종강세를 나타내었으며 등숙률과 천립중은 잡종강세 현상이 나타나지 않았다. 2. 출수기에 양친보다 상층부에 분포하는 잎이 많았으며 또한 광 소멸계수는 전 생육기간에 걸쳐서 양친보다 작아서 수광상태가 양호한 군락 구조를 형성하였다. 3. F$_1$은 양친에 비하여 잎의 질소함량이 높을 뿐만 아니라 군락 상하층간의 질소농도의 구배가 커서 군락 동화에 유리한 질소의 공간적 분포를 하였는데, 특히 생육 초기에 F$_1$과 양친간 질소의 공간적 구배의 차이가 컸으며 생육의 진전에 따라 그 차이는 작아졌다. 4. 유수 분화기 엽의 광합성 속도는 F$_1$이 양친 품종들보다 높았는데 이는 엽의 질소함량이 높은데서 기인되는 것으로 판단되었으며, 같은 품종군에서는 수량의 Heterosis가 높은 조합이 광합성 속도와 질소함량이 높았다. 5. 유수분화기 이전 특히 생육초기의 군락생장율(CGR), 순동화율(NAR), 엽면적지수(LAI)는 양친에 비하여 잡종품종이 높았으며, 품종들의 이 생육지표들은 잎의 질소함량과 높은 정의 상관이 있었다. 한편 영양생장기의 이 생육지표들 및 질소 보유량과 품종들의 수량 및 단위 면적당 영화수와는 정의 유의한 상관이 있었으며 생육초기일수록 상관이 높았다. 6. F$_1$은 생육초기에 엽의 질소함량이 높아 단위동화율이 높을 뿐만아니라 질소의 군락내 상하간의 농도 구배가 크고 흡광계수가 낮아 군락의 광합성에 유리하고, 이에따른 영양 생장기 건물 생산성의 증대가 단위 면적당 영화수의 증대를 통해 수량의 증대를 가져오는 것으로 판단되었다.

• Journal of Chest Surgery
• /
• 제47권4호
• /
• pp.327-332
• /
• 2014

Single-port video-assisted thoracic surgery (VATS) has slowly established itself as an alternate surgical approach for the treatment of an increasingly wide range of thoracic conditions. The potential benefits of fewer surgical incisions, better cosmesis, and less postoperative pain and paraesthesia have led to the technique's popularity worldwide. The limited single small incision through which the surgeon has to operate poses challenges that are slowly being addressed by improvements in instrument design. Of note, instruments and video-camera systems that are narrower and angulated have made single-port VATS major lung resection easier to perform and learn. In the future, we may see the development of subcostal or embryonic natural orifice translumenal endoscopic surgery access, evolution in anaesthesia strategies, and cross-discipline imaging-assisted lesion localization for single-port VATS procedures.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.365-379
• /
• 2009

Epoxy/S2-glass reinforced composites (SGRPs) infused with Cloisite 30B nanoclays were manufactured using the vacuum assisted resin infusion molding (VARIM) process. Prior to infusion, the matrix and clays were thoroughly mixed using a direct mixing technique (DMT) and a high shear mixing technique (HSMT) to ensure uniform dispersion of the nanoclays. Structures with varying clay contents (1-3 wt%) were manufactured. Both pristine and SGRP nanocomposites were then subjected to mechanical testing. For the specimens manufactured by DMT, the tensile, flexural, and compressive modulus increased with increasing the clay content. Similarly, the tensile, flexural, compressive, interlaminate shear and impact strength increased with the addition of 1 wt% clay: however the trend reversed with further increase in the clay content. Specimens manufactured by HSMT showed superior properties compared to those of nanocomposites containing 1 wt% clay produced by DMT. In order to understand these phenomena a morphological study was conducted. Transmission electron microscopy (TEM) micrographs revealed that HSMT led to better dispersion and changed the nanoclay structure from orderly intercalation to disorderly intercalation giving multi-directional strength.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.74-81
• /
• 1999

The integrated chip of optical micro-encoder was fabricated and the feasibility as displacement measurement device was confirmed. The geometry of micro-encoder was designed to utilize the optical interference effect on the second order of diffracted beams. The hybrid-type micro-encoder consisted with light emitting diode, photodiode, polyimide wave-guide and micro-lens provides stable micro-encoding results for high speed displacements. The measurement shows the resolution of displacement of 1.00 +/- 0.02 ${\mu}m$ for the grating with scale pitch of 2.0${\mu}m$.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.541-549
• /
• 2003

A basic experimental study was conducted in order to find the optimum combustion control technology to decrease the thermal NO$_{x}$, by applying the catalytic combustion method with natural gas. NO$_{x}$ emission increased with increasing space velocity due to temperature rising in the furnace. In order to overcome the low resistance to high temperature, secondary air was supplied to the CST combustor. The following secondary fuel formed combustible mixture in part, which resulted in steep increase of the exiting temperature of the 2nd catalyst bed. It led to the more generator of NO$_{x}$, 30∼60% of the 1 st catalyst bed. It might be due to the potential increase of thermal NO$_{x}$.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.25-26
• /
• 2006

Azobenzene functionalized polymers have been extensively investigated due to the potential applications in the areas of optical switching, optical elements, optical information storage, and nonlinear optics. These applications are mainly achievable due to photoinduced properties of azobenzene groups with photoisomerization and photoinduced anisotropy. We report applications to the optoelectronic devices using inscribed one-(1D) and two-dimensional (2D) SRGs on azo polymer films. The inscribed holographic SRGs patterns were useful to control or enhance optoelectronic properties such as transparent electrode patterning, hybrid solar cell and ultraviolet GaN-based LED.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.133-139
• /
• 2011

We have performed optical design of light guide plates (LGPs) for a photobioreactor by using an illumination design tool. An LGP having light emitting diodes (LEDs) as a light source on the four sides was designed by optimizing the distribution of LGP patterns and design of another LGP, on top of which sunlight was focused by a Fresnel lens, was executed. Finally, a hybrid-solar-and-LED-lighting scheme was described. Detailed design process and optical performances of the designed LGPs are presented.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.1-4
• /
• 2008

This paper reports the design of a multiwavelength fiber laser source that utilizes a linear cavity of hybrid Brillouin/Erbium fiber laser (BEFL). The output power, threshold power and free running cavity modes were investigated against the pump powers. The structure exhibited low threshold operation of 4 mW at 2.3 mW injected Brillouin pump power. The optimization of Brillouin pump wavelength, power and Erbium gain led to a maximum possible number of channels generated. Simultaneous and stable operation of 21 channels with 10.88 GHz channels spacing were obtained from this architecture at 1 mW injected Brillouin pump power and 90 m W Erbium doped fiber pump power in the 1555 nm region.

• Molecules and Cells
• /
• 제39권10호
• /
• pp.756-761
• /
• 2016

We have identified 88 interactor candidates for human growth hormone (GH) by the yeast two-hybrid assay. Among those, we focused our efforts on carboxypeptidase E (CPE), which has been thought to play a key role in sorting prohormones, such as pro-opiomelanocortin (POMC), to regulated secretory vesicles. We found that CPE colocalizes with and interacts with GH in AtT20 pituitary cells. Downregulation of CPE led to decreased levels of GH secretion, consistent with involvement of CPE in GH sorting/secretion. Our binding assay in vitro with bacterially expressed proteins suggested that GH directly interacts with CPE but in a manner different from POMC.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.14-19
• /
• 2014

The global demand for reduction in the weight of automobiles has led many countries to focus on the development of hybrid, eco-friendly, and electric cars. Reduction in the weight of materials can both increase fuel efficiency and maximize automobile performance. Therefore, the design of automobile should be inclined towards the safety aspects. but at the same time, it also consider reducing the structural weight of an automobile. In this study, CFRP side members with circular and double hat shaped section was manufactured. The impact collapse tests performed with change of the stacking condition, such as variation of interface number and outerlayer angle. The impact collapse load and absorbed energy were quantitatively analyzed according to the changes in section shapes and stacking condition. This analysis was performed to obtain design data that can be applied in the development of optimum lightweight members for automobiles.