• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.1-6
• /
• 2002

How is the flow in a rotating impeller. About 35 years have passed since one experimentalist rotating with the impeller. of a huge centrifugal blower made the flow measurements using a hot-wire anemometer (Fowler 1968). Optical measurement methods have great advantages over the intrusive methods especially for the flow measurement in a rotating impeller. One is the optical flow visualization (FV) technique (Senoo, et al., 1968) and the other is the application of laser velocimetry (LV) (Hah and Krain, 1990). Particle image velocimetries (PIVs) combine major features of both FV and LV, and are very attractive due to the feasibility of simultaneous and multi-points measurements (Hayami and Aramaki, 1999). A high-pressure-ratio transonic centrifugal compressor with a low-solidity cascade diffuser was tested in a closed loop with HFC134a gas at 18,000rpm (Hayami, 2000). Two kinds of measurement techniques by image processing were applied to visualize a flow in the compressor. One is a velocity field measurement at the inducer of the impeller using a PIV and the other is a pressure field measurement on the side wall of the cascade diffuser using a pressure sensitive paint (PSP) measurement technique. The PIV was successfully applied for visualization of an unsteady behavior of a shock wave based on the instantaneous velocity field measurement (Hayami, et al., 2002b) as well as a phase-averaged velocity vector field with a shock wave over one blade pitch (Hayami, et al., 2002a. b). A violent change in pressure was successfully visualized using a PSP measurement during a surge condition even though there are still some problems to be overcome (Hayami, et al., 2002c). Both PIV and PSP results are discussed in comparison with those of laser-2-focus (L2F) velocimetry and those of semiconductor pressure sensors. Experimental fluid dynamics (EFDs) are still growing up more and more both in hardware and in software. On the other hand, computational fluid dynamics (CFDs) are very attractive to understand the details of flow. A secondary flow on the side wall of the cascade diffuser was visualized based either steady or unsteady CFD calculations (Bonaiuti, et al.,2002). EFD and CFD methods will be combined to a hybrid method being complementary to each other. Measurement techniques by image processing as well as CFD calculations give a huge amount of data. Then, data mining technique will become more important to understand the flow mechanism both for EFD and CFD.

• Journal of Broadcast Engineering
• /
• v.27 no.1
• /
• pp.31-43
• /
• 2022

Traditional video compression has developed so far based on hybrid compression methods through motion prediction, residual coding, and quantization. With the rapid development of technology through artificial neural networks in recent years, research on image compression and video compression based on artificial neural networks is also progressing rapidly, showing competitiveness compared to the performance of traditional video compression codecs. In this paper, a new method capable of improving the performance of such an artificial neural network-based video compression model is presented. Basically, we take the rate-distortion optimization method using the auto-encoder and entropy model adopted by the existing learned video compression model and shifts some components of the latent information that are difficult for entropy model to estimate when transmitting compressed latent representation to the decoder side from the encoder side, and finally compensates the distortion of lost information. In this way, the existing neural network based video compression framework, MFVC (Motion Free Video Compression) is improved and the BDBR (Bjøntegaard Delta-Rate) calculated based on H.264 is nearly twice the amount of bits (-27%) of MFVC (-14%). The proposed method has the advantage of being widely applicable to neural network based image or video compression technologies, not only to MFVC, but also to models using latent information and entropy model.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.59-83
• /
• 2015

Magical realism, blooming and improving in Latin America, opened the new vision about reality and rationalism, coming out from the out-styled frame of past. While having common points with unrealistic literature, which uses fantastical components, magical realism is different from Surrealism and fantasy literature that is focusing on reality and realizing reality intensely. In the early stage of this research, magical realism was restricted by the characteristics of literature of Latin America, but the research of magical realism is expanding in planning Post-Modernism nowadays. Lately, the influence of magical realism is identified in literatures, arts, films, and animations over the world; according to the research, however, research about magical realism in animations was not done in Korea before. A Korean independent animation "A coffee vending machine and its sword" was evaluated positively in many international film festivals is valuable as the research of magical realism. Throughout this study, this animation "A coffee vending machine and its sword" was analyzed by its narrative and images. The analysis of narrative consists two parts. One is about the form of narrative and the other is about contents through the story. Analysis of Image is also divided into two parts: background image and character image. In this animation, the protagonist is narrating about the fantastic accidents in his life and his own feelings towards it. The narration leads audience to understand his situation and feelings in meta-fiction. On the surface, audience watches the love story of a normal girl and coffee vending machine in this artwork, but deep inside the animation, it is visible that the directors tried to make audiences think about the life of 880,000-won Generation in Korea. The background image was represented as real places in Seoul including the landmark of Seoul, making mimesis of reality in Korea. The character image has two conflicting aspects with reincarnated warrior, Jinyoungyoung and a coffee vending machine. It is a hybrid-character transmogrifying between two characters. Likewise, "A coffee vending machine and its sword" has the characteristics of Korean magical realism through form, content and image. Through analyzing the Korean independent animation "A coffee vending machine and its sword", this research tried to find a way of using factors of fantasy, of representing reality as a dramatic device and of using magical realism of Korean animation for bond of sympathy with audience.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.88-98
• /
• 2015

4-Amino-N-hexadecylbenzamide-graphene sheets (AHB-GSs), used in the preparation of the polyimide (PI) nanocomposite films, were synthesized by mixing a dispersion of graphite oxide with a solution of the ammonium salt of AHB. The atomic force microscope image of functionalized-GS on mica and a profile plot revealed the average thickness of AHB-GS to be ~3.21 nm. PI films were synthesized by reacting 4,4'-biphthalic anhydride and bis(4-aminophenyl) sulfide. PI nanocomposite films containing various contents of AHB-GS over the range of 0-10 wt% were synthesized using the solution intercalation method. The PI nanocomposite films under different thermal imidization temperatures, 250 and $350^{\circ}C$, were examined. The graphenes, for the most part, were well dispersed in the polymer matrix despite some agglomeration. However, micrometer-scale particles were not detected. The average thickness of the particles was <10 nm, as revealed from the transmission electron microscope images. Only a small amount of AHB-GS was required to improve the gas barrier, and electrical conductivity. In contrast, the glass transition and initial decomposition temperatures of the PI hybrid films continued to decrease with increasing content of AHB-GS up to 10 wt%. In general, the properties of the PI hybrid films heat treated at $350^{\circ}C$ were better than those of films heat treated at $250^{\circ}C$.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.148-157
• /
• 2014

Various techniques have been developed for efficient compression of stereoscopic 3D videos. Mixed-resolution based approach is one representative bit-rate saving method based on the characteristics of human visual system that the mixed-resolution stereoscopic videos are perceived close to the higher resolution. However, when the difference between the left and right image resolutions is bigger than a certain threshold level, it causes the perceived quality degradation of the 3D images. Subsequently, several researches tried to find the correlation between the difference in resolution and the level of the perceived quality degradation, but they conducted the experiments just considering the difference in resolution without considering the viewing distances, so thereby different results were retrieved from test to test. In this work, we calculated the optimal viewing distance based on the human visual system, and conducted the subjective tests with the calculated viewing distance. With the results, we demonstrate that the fixed and mobile hybrid 3DTV, which is based on mixed-resolution stereoscopic images, can provide the high quality 3D services.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.99-113
• /
• 2004

A new architecture called SAN(Storage Area Network) was developed in response to the requirements of high availability of data, scalable growth, and system performance. In order to use SAN more efficiently, most of SAN operating softwares support storage virtualization concepts that allow users to view physical storage devices attached to SAN as a large volume virtually h logical volume manager plays a key role in storage virtualization. It realizes the storage virtualization by mapping logical addresses to physical addresses. A logical volume manager also supports a snapshot that preserves a volume image at certain time and on-line reorganization to allow users to add/remove storage devices to/from SAN even while the system is running. To support the snapshot and the on-line reorganization, most logical volume managers have used table based mapping methods. However, it is very difficult to manage mapping table because the mapping table is large in proportion to a storage capacity. In this paper, we design and implement an efficient and flexible hybrid mapping method based on mathematical equations. The mapping method in this paper supports a snapshot and on-line reorganization. The proposed snapshot and on-line reorganization are performed on the reserved area which is separated from data area of a volume. Due to this strategy normal I/O operations are not affected by snapshot and reorganization. Finally, we show the superiority of our proposed mapping method through various experiments.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.240-249
• /
• 2001

A high speed ultra-compact lens with a diffractive optical element (DOE) is designed, which can be applied to mobile communication devices such as IMT2000, PDA, notebook computer, etc. The designed hybrid lens has sufficiently high performance of less than f/2.2, compact size of 3.3 mm (1st surf. to image), and wide field angle of more than 30 deg. compared with the specifications of a single lens. By proper choice of the aspheric and DOE surface which has very large negative dispersion, we can correct chromatic and high order aberrations through the optimization technique. From Seidel third order aberration theory and Sweatt modeling, the initial data and surface configurations, that is, the combination condition of the DOE and the aspherical surface are obtained. However, due to the consideration of diffraction efficiency of a DOE, we can choose only four cases as the optimization input, and present the best solution after evaluating and comparing those four cases. On the other hand, we also report dramatic improvement in optical performance by inserting another refractive lens (so-called, field flattener), that keeps the refractive power of an original DOE lens and makes the petzval sum zero in the original DOE lens system. ystem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.47-47
• /
• 2010

Over the past 20 years, constant progress in noise and vibration (NVH) engineering has enabled to constantly advance quality and comfort of operation and use of really any products - from automobiles to aircraft, to all kinds of industrial vehicles and machines - to the extend that for many products, supreme NVH performance has becomes part of its brand image in the market. At the same time, the product innovation agenda in the automotive, aircraft and really many other industries, has been extended very much in recent years by meeting ever more strict environmental regulations. Like in the automotive industry, the drive towards meeting emission and CO2 targets leads to very much accelerated adoption of new powertrain concepts (downsizing of ICE, hybrid-electrical...), and to new vehicle architectures and the application of new materials to reduce weight, which bring new challenges for not only maintaining but further improving NVH performance. This drives for innovation in NVH engineering, so as to succeed in meeting a product brand performance for NVH, while as the same time satisfying eco-constraints. Product innovation has also become increasingly dependent on the adoption of electronics and software, which drives for new solutions for NVH engineering that can be applied for NVH performance optimization of mechatronic products. Finally, relentless pressure to shorten time to market while maintaining overall product quality and reliability, mandates that the practice and solutions for NVH engineering can be optimally applied in all phases of product development. The presentation will first review the afore trends for product and process innovation, and discuss the challenges they represent for NVH engineering. Next, the presentation discusses new solutions for NVH engineering of products, so as to meet target brand values, while at the same time meeting ever more strict eco constraints, and this within a context of increasing adoption of electronics and controls to drive product innovation. NVH being very much defined by system level performance, these solutions implement the approach of "Model Based System Engineering" to increase the impact of system level analysis for NVH in all phases of product development: - At the Concept Phase, to be able to do business case analysis of new product concepts; to arrive at an optimized and robust product architecture (e.g. to hybrid powertrain lay-out, to optimize fuel economy); to enable target cascading, to subsystem and component level. - In Development Phase, to increase realism and productivity of simulation, so as to frontload virtual validation of components and subsystems and to further reduce reliance on physical testing. - During the final System Testing Phase, to enable subsystem testing by a combination of physical testing and simulation: using simulation models to simulate the final integration context when testing a subsystem, enabling to frontload subsystem testing before final system integration is possible. - To interconnect Mechanical, Electronical and Controls engineering, in all phases of development, by supporting model driven controls engineering (MIL, SIL, HIL). Finally, the presentation reviews examples of how LMS is implementing such new applications for NVH engineering with lead customers in Europe, Asia and US, with demonstrated benefits both in terms of shortening development cycles, and/or enabling a simulation based approach to reduce reliance on physical testing.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.45-51
• /
• 2004

The number of development in educational software is currently decreasing despite rapid improvement in computer technology. This is partly due to the fact that the current software relies on the conventional hypermedia method or on the hierarchical method, both of which have inherent limitations. To compensate their limitations while keeping their merits, a hybrid method called the structured hypermedia link method has recently been proposed in the literature. It has been found that the structured hypermedia link method is far superior than the conventional methods in terms of educational effectiveness because it can help a learner to search various data by navigating between the study topics on his own while maintaining his level of cognitively overloaded stress to the minimum. The clinical microbiology laboratories were chosen as the candidate site for this study because its educational system has not been standardized and has been relying heavily on the personal experience. In this study, the hypermedia link method was applied to the development of an education system for the image analysis in clinical microbiology laboratories. For this purpose, a web-based computer aided instruction(CAI) program was designed to systematically organize the Gram stain method based on the standardized image data. In the future, CAI program must be intended to educate for beginner and developed to accept for variable knowledge. And it will be useful program for technicians in case of applying various examinations based Gram stain method of this study.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1449-1461
• /
• 2005

In this paper, we propose a vehicle recognition system based on the classification of vehicle identification mark and recognition of vehicle license plate. In the proposed algorithm, From the input vehicle image, we first simulate preprocessing procedures such as noise reduction, thinning etc., and detect vehicle identification mark and license plate region using the frequency distribution of intensity variation. And then, we classify extracted vehicle candidate region into identification mark, character and number of vehicle by using structural feature informations of vehicle. Lastly, we recognize vehicle informations with recognition of identification mark, character and number of vehicle using hybrid and vertical/horizontal pattern vector method. In the proposed algorithm, we used three properties of vehicle informations such as Independency property, discriminance property and frequency distribution of intensity variation property. In the vehicle images, identification mark is generally independent of the types of vehicle and vehicle identification mark. And also, the license plate region between character and background as well as horizontal/vertical intensity variations are more noticeable than other regions. To show the efficiency of the propofed algorithm, we tested it on 350 vehicle images and found that the propofed method shows good Performance regardless of irregular environment conditions as well as noise, size, and location of vehicles.