• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.459-466
• /
• 2007

TCP/IP processing imposes a heavy load on the host CPU when it is processed by the host CPU on a very high-speed network. Recently the TCP/IP Offload Engine (TOE), which processes TCP/IP on a network adapter instead of the host CPU, has become an attractive solution to reduce the load in the host CPU. There have been two approaches to implement TOE. One is the software TOE in which TCP/IP is processed by an embedded processor and the other is the hardware TOE in which TCP/IP is processed by a dedicated ASIC. The software TOE has poor performance and the hardware TOE is neither flexible nor expandable enough to add new features. In this paper we designed and implemented a hybrid TOE architecture, in which TCP/IP is processed by cooperation of hardware and software, based on an FPGA that has two embedded processor cores. The hybrid TOE can have high performance by processing time-critical operations such as making and processing data packets in hardware. The software based on the embedded Linux performs operations that are not time-critical such as connection establishment, flow control and congestions, thus the hybrid TOE can have enough flexibility and expandability. To improve the performance of the hybrid TOE, we developed a hardware-based transmission/reception accelerator that processes important operations such as creating data packets. In the experiments the hybrid TOE shows the minimum latency of about $19{\mu}s$. The CPU utilization of the hybrid TOE is below 6 % and the maximum bandwidth of the hybrid TOE is about 675 Mbps.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.670-684
• /
• 2015

The hybrid cascaded multilevel inverter (HCMLI) is a popular converter topology that is being increasingly used in high power medium voltage drives. The intricacy of the control technique for a HCMLI increases with the number of levels and due to fluctuating dc voltages. This paper presents a novel offline quadrant search based space vector modulation technique to synthesize a sinusoidal output from a dispersed pattern of voltage vectors due to different voltages in the auxiliary unit. Such an investigation has never been reported in the literature and it is being attempted for the first time. The method suggested distributes the voltage vectors for a reduced total harmonic distortion at minimal computation. In addition, the proposed algorithm determines the maximum modulation index in the linear modulation range in order to synthesize a sinusoidal output for both normal and abnormal vector patterns. It is better suited for a wide range of practical applications. It is particularly well suited for renewable source fed inverters which utilize large capacitor banks to maintain the dc link, which are prone to such slow fluctuations. The proposed quadrant search space vector modulation technique is simulated using MATLAB/SIMULINK and implemented using a Nexys-2 Spartan-3E FPGA for a developed prototype.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.342-350
• /
• 2010

Randomizing the switching frequency (RSF) to reduce the electromagnetic interference (EMI) of switching power converters is a well-known technique that has been previously discussed. The randomized pulse position (RPP) technique, in which the switching frequency is kept fixed while the pulse position (the delay from the starting of the switching cycle to the turn-on instant within the cycle) is randomized, has been previously addressed in the literature for the same purpose. This paper presents a double-hybrid technique (DHB) for EMI reduction in dc-dc switching regulators. The proposed technique employed both the RSF and the RPP techniques. To effectively spread the conducted-noise frequency spectrum and at the same time attain a satisfactory output voltage quality, two parameters (switching frequency and pulse position) were randomized, and a third parameter (the duty ratio) was controlled by a digital compensator. Implementation was achieved using field programmable gate array (FPGA) technology, which is increasingly being adopted in industrial electronic applications. To evaluate the contribution of the proposed DHB technique, investigations were carried out for each basic PWM, RPP, RSF, and DHB technique. Then a comparison was made of the performances achieved. The experimentally investigated features include the effect of each technique on the common-mode, differential-mode, and total conducted-noise characteristics, and their influence on the converter’s output ripple voltage.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.436-438
• /
• 2005

본 논문에서는 전력선 위상 측정을 위해 A/D 변환기 및 위상계측 연산장치를 집적한 하이브리드 센서칩의 구현 기법을 제시하였다. 개발한 위상계측 연산장치는 recursive sliding-DFT에 기반하였으며 곱셈기의 시분할 공유 구조를 사용하여 칩의 구현 면적을 최소화 하였다. 60Hz의 전력선 신호를 중심주파수로 하는 AD 변환장치는 sigma-delta ADC를 기반으로 하여 8-bit 정밀도를 제공하며 아날로그부의 구현을 최소화하도륵 설계하였다. 설계한 하이브리드 센서칩은 컴퓨터 시뮬레이션 및 FPGA 구현을 통해 동작을 검증하였으며, 검증 완료후 $0.35{\mu}m$ CMOS 공정기술로 구현하였다. 전력선 위상을 측정하기 위해 구현된 4채널 하이브리드 센서 칩의 설계면적은 $5{\times}5m^2$ 의 약 20%정도를 차지하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.715-722
• /
• 2010

This paper describes a hardware design of hash function processor which implements Korean Hash Algorithm Standard HAS-160. The HAS-160 processor compresses a message with arbitrary lengths into a hash code with a fixed length of 160-bit. To achieve high-speed operation with small-area, arithmetic operation for step-operation is implemented by using a hybrid structure of 5:3 and 3:2 carry-save adders and carry-select adder. It computes a 160-bit hash code from a message block of 512 bits in 82 clock cycles, and has 312 Mbps throughput at 50 MHz@3.3-V clock frequency. The designed HAS-160 processor is verified by FPGA implementation, and it has 17,600 gates on a layout area of about $1\;mm^2$ using a 0.35-${\mu}m$ CMOS cell library.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1997

A multi-channel digital GPS receiver has been developed including a RF-to-IF engine (engine 1), a digital signal processing engine (engine 2) with a microprocessor interfacing, and a navigation software. A high speed SiGe heterojunction bipolar transistor (HBT) as a active device has been mounted on chip-on-board (COB) type hybrid ICs such as LNA, mixer, and VCO in RF front-end of the engine 1 board. A 6-channel digital correlator together with a real-time clock and a microprocessor interface has been realized using an Altera Flex 10K FPGA as well as ASIC technology. Navigation software controlling the correlator for GPS signal tracking, retrieval and storing a message retrieval, and position calculation has been implemented. The GPS receiver was tested using a single channel STR2770 simulator. Successful navigation message retrieval and position determination was confirmed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.244-253
• /
• 2000

Since no single routing-switching combination performs the best under various different types of applications, a flexible network is required to support a range of polices. This paper introduces an implementation of a look-up table routing engine offering flexible routing and switching polices without performance degradation unlike those based on microprocessors. By deciding contents of look-up tables, the engine can implement wormhole routing, virtual cut-through routing, and packet switching, as well as hybrid switching, under a variety of routing algorithms. Since the routing engine has a piplelined look-up table architecture, the routing delay is as small as one flit, and thus it can overlap multiple routing actions without performance degradation in comparison with hardwired routers dedicated to a specific policy. Because four pipeline stages do not induce a hazard, expensive forwarding logic is not required. The routing engine can accommodate four physical links with a time shared cut-through bus or single link with a cross-bar switch. It is implemented using Xilinx 4000 series FPGA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.33-40
• /
• 2005

This paper describes a design of FFT/IFFT Core(FFT256/2k), which is an essential block in terrestrial DMB modem. It has four operation modes including 256/512/1024/2048-point FFT/IFFT in order to support the Eureka-147 transmission modes. The hybrid architecture, which is composed of R2SDF and R2SDC structure, reduces memory by $62\%$ compared to R2SDC structure, and the SQNR performance is improved by TS_CBFP(Two Step Convergent Block Floating Point). Timing simulation results show that it can operate up to 50MHz(a)2.5-V, resulting that a 2048-point FFT/IFFT can be computed in 41-us. The FFT256/2k core designed in Verilog-HDL has about 68,400 gates and 58,130 RAM. The average power consumption estimated using switching activity is about 113-mW, and the total average SQNR of over 50-dB is achieved. The functionality of the core was fully verified by FPGA implementation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.320-321
• /
• 2011

본 논문은 디지털 케이블전송망인 HFC(Hybrid Fiber and Coaxial)망 기반하에서 6MHz 다수의 방송채널결합 기술을 이용하여, 대용량 3D 및 8K-UHD 콘텐츠 전송을 위한 방송망 채널결합형 200Mbps 급 1024-QAM 송수신시스템 개발에 대하여 기술한다. H.264 비디오 부호화기를 사용하여 8K-UHDTV 및 3D/UHD 융합형 서비스를 시청자에게 제공하기 위해서는 약 120~160Mbps 의 대용량 데이터 전송률이 확보되어야 한다. 이와같이 대용량 3D/8K-UHDTV 콘텐츠를 전송하기 위해서는 상대적으로 채널환경이 우수한 HFC 디지털 케이블망을 이용한 대용량 실감미디어 콘텐츠 전송기법에 대한 연구가 주목 받고 있다. 본 논문에서는 FPGA 를 이용하여 HFC 망 기반에서 기존 OpenCalbe/DOCSIS 3.0 256-QAM 대비 약 30% 전송효율이 개선된 3D/8K-UHDTV 대용량 실감미디어 콘텐츠 전송을 위한 방송망 채널결합형 1024-QAM 송수신기 구현 및 개발에 관한 내용을 기술한다.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.752-765
• /
• 2015

We propose a novel post-processing algorithm and its very-large-scale integration architecture that simultaneously uses the passive and active stereo vision information to improve the reliability of the three-dimensional disparity in a hybrid stereo vision system. The proposed architecture consists of four steps - left-right consistency checking, semi-2D hole filling, a tiny adaptive variance checking, and a 2D weighted median filter. The experimental results show that the error rate of the proposed algorithm (5.77%) is less than that of a raw disparity (10.12%) for a real-world camera image having a $1,280{\times}720$ resolution and maximum disparity of 256. Moreover, for the famous Middlebury stereo image sets, the proposed algorithm's error rate (8.30%) is also less than that of the raw disparity (13.7%). The proposed architecture is implemented on a single commercial field-programmable gate array using only 13.01% of slice resources, which achieves a rate of 60 fps for $1,280{\times}720$ stereo images with a disparity range of 256.