• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.113-116
• /
• 2017

최근 급격히 증가한 모바일 기기와 Over The Top (OTT) 서비스의 활성화로 인하여 CMM 기반의 LTE/EPC 네트워크에 과다한 데이터/제어 트래픽의 수용이 힘들어지는 문제가 중요 이슈로 부각되고 있다. 이를 해결하기 위하여 IETF는 Distributed Mobility Management (DMM) 기반의 이동성 관리 방안을 제안하였다. 하지만 DMM 기술은 중앙의 트래픽 부하 분산에 초점을 두고 있어 단말의 이동과 관련하여 발생하는 과다한 제어 트래픽 수용에 관한 문제를 해결하기에는 부족하다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 SDN 기반으로 CMM과 DMM을 함께 이용하는 HMM (Hybrid Mobility Management) LTE/ECP 네트워크 모델을 제시한다. 또한 HMM 기반의 LTE/EPC 네트워크 모델은 CMM 및 DMM 기법의 선택을 위해 단말의 이동성과 PDN 연결의 개수를 고려한 선택방안을 제시하며, 제안하는 HMM 기반의 LTE/EPC 네트워크 구조에서의 데이터 트래픽 부하량과 단말의 이동성과 PDN 연결 개수에 따라 제어 트래픽의 양을 비교하는 그래프를 제시하며 제안하는 네트워크 모델의 타당성을 입증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.599-609
• /
• 2000

In this paper, sub-harmonically pumped single balanced resistive mixers are presented . Frequency bandwidth is selected for a Ku-band, which is 11.75-12.25GHz for RF, 5.375∼5.625 GHz for LO, and 1 GHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with photonic band gap(PBG) structure is used for good conversion loss and unwanted harmonics suppression. Two types of mixers are suggested, which are one with no gate bias for no DC power consumption and the other with the IF amplifier for conversion gain. When a LO signal with the power of 6 dBm at 5.5 GHz is injected, a conversion loss of 12.17dB and a conversion gain of 7.83 dB are obtained for each mixer. For the both mixers , LO to RF isolation of 20 dB and LO to IF isolation of 60dB are obtained. With the RF power of -30dBm to -3dBm, the mixer shows linear characteristics region of IF. this mixer can be applied for Ku-band and other microwave communication systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.426-429
• /
• 2015

최근 급격히 증가한 모바일 기기로 인하여 발생되는 데이터/제어 트래픽은 LTE/EPC 네트워크에서 중앙에 과다한 트래픽 수용문제가 중요 이슈로 부각되고 있다. 기존의 Centralized Mobility Management(CMM) 기반의 LTE/EPC 네트워크에서 Mobility Anchor 역할을 수행하는 Packet Data Network Gateway (P-GW)에서는 데이터 트래픽 과부하가 발생한다. 또한 Distributed Mobility Management (DMM) 기반의 LTE/EPC 네트워크에서 분산된 Mobility Anchor 역할을 수행하는 PDN Edge Gateway (P-EGW)에서는 제어 트래픽의 과부하가 발생한다. 본 논문에서는 이러한 문제를 해결하기 위하여 CMM 기반과 DMM 기반을 결합한 새로운 Software Defined Network (SDN) 기반의 LTE/EPC 네트워크 이동성 관리 기법을 제안한다. 이를 위하여, P-EGW를 네트워크 내에 분산 배치하고 중앙에 P-GW를 배치한다. SDN 컨트롤러는 EPC의 역할도 수행하며 UE의 이동성에 따라 적절한 CMM 기법과 DMM 기법을 이용하도록 하는 기법을 제안한다. 또한, 제안하는 새로운 LTE/EPC 네트워크 구조와 기존의 CMM기반의 LTE/EPC 네트워크 구조, DMM 기반의 LTE/EPC 네트워크 구조를 핸드오버 지연시간과 데이터 전송시간 측면에서 성능 비교 분석을 한다.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.4
• /
• pp.281-287
• /
• 2022

Pharmacists should maintain professional competencies to provide optimal pharmaceutical care services to patients, which can be achieved through continued commitment to lifelong learning. Traditionally continuing education (CE) has been widely used as a way of lifelong learning for many healthcare professionals. It, however, has several limitations. CE is delivered in the form of instructor-led education focused on multiple learners. Learning is passive and reactive for participants, so it sometimes does not lead to bringing behavioral changes in workplace performance. Therefore, recently the concept of lifelong learning tends to move from CE toward continuing professional development (CPD). CPD is an ongoing process that improves knowledge, skills, and competencies throughout a professional's career. It is a more comprehensive structured approach toward the enhancement of personal competencies. It emphasizes an individual's learning needs and goals and enables learning to become proactive, conscious, and self-directed. CPD consists of four stages: reflect, plan, learn, and evaluate. CE is one component of CPD. Each stage is recorded in a CPD portfolio. There are many practical difficulties in implementing the complete CPD system for lifelong learning of pharmacists in many countries including Korea. Applying a hybrid form that utilizes CPD and CE together, as in the case of some countries, could be an alternative. Furthermore, in undergraduate pharmacy education, it is necessary to teach students about CPD and train them on how to perform CPD as a pharmacist.

• Plant Resources
• /
• v.5 no.1
• /
• pp.59-69
• /
• 2002

Twenty-three plants of Japanese apricot (Prunus mume) were collected from several sites around Mountains JIRI in Korea. Japanese apricots having the different morphological features were evenly distributed in the groups made from the cluster analysis, indicating no geographic distributions but artificial vegetations in Korea. Japanese apricots were, as based on the PCR-RAPD techniques, clustered into the three groups; a group (prototype) having the five white petals with the five red sepals, a group (green type) having the five white petals with the five green sepals, and a group (hybrid type) having the more than five red petals with various colored sepals. The prototype apricots showed higher toxicities than other type apricot against bacteria and production of less compounds in TLC plates. The polypetal types of Japanes apricot were related to those of p. armebiaca in the characteristics of seed (the ruggedness), but also to be closed to those of p. armebiaca in PCR-RAPD analysis. The cluster analysis of the twenty three apricots and its related species calculated from the two primers were shown to distinguish relationships of cultivars within species, or of individual plants within cultivars, but also to display the two overlapping bands resulted from PCR-RAPD technique.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.1044-1047
• /
• 2010

개인화는 사용자에게 개인의 필요와 목적, 지식, 흥미 또는 상황에 맞는 상품과 서비스 그리고 정보를 제공한다. 개인화 서비스의 과정을 통하여 개인 사용자는 자동적으로 선별된 정보만을 제공받음으로써 정보화 사회의 정보과잉 문제를 완화하고, 시간의 절약을 가져올 수 있다. 본 연구에서는 제주물산업의 주요 분야인 병입수, 기능성 주류 및 음료, 수치료 등에 적용할 수 있는 개인화 기술에 대해 연구하고 제주 맥주를 위한 개인화 시스템을 설계 및 구현하였다. 본 연구의 성과로 제주물산업을 통해 개발되는 다양한 상품과 서비스에 대해 고객 개별적인 맞춤형 서비스를 제공해 줌으로 해서 고객의 만족도를 극대화하고 제주물산업의 상품을 글로벌 브랜딩화하는데 기여할 수 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1106-1110
• /
• 2005

We fabricated (110) silicon hard master by using anisotropic wet etching for embossing. The etching chemical for the silicon wafer was a TMAH $25\%$ solution. The anisotropic wet etching produces a smooth sidewall surface and the surface roughness of the fabricated master is about 3 nm. After spin coating an organic-inorganic sol-gel hybrid material on a silicon substrate, we employed hot embossing technique operated at a low pressure and temperature to form patterns on the silicon substrate by using the fabricated master. We successfully fabricated the multi-mode planar optical waveguides showing low propagation loss of 0.4 dB/cm. The surface roughness of embossed patterns was uniform for more than 10 times of the embossing processes with a single hydrophobic surface treatment of the silicon hard master.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.645-648
• /
• 2005

To fabricate a (100) silicon hard master, we used anisotropic wet etching for the embossing. The etching chemical for the sili­con wafer was a TMAH 25$\%$ solution. The anisotropic wet etching produces a smooth sidewall surface inclined at 54.7°, and the surface roughness of the fabricated master is about 1 nm. After spin coating an organic-inorganic sol-gel hybrid resin on a silicon substrate, we used the fabricated master to form patterns on the silicon substrate. Thus, we successfully obtained patterns via the hot embossing technique with the (100) silicon hard master. Moreover, by using a single hydrophobic surface treatment of the master, we succeeded in achieving uniform surface roughness of the embossed patterns for more than ten embossments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.3
• /
• pp.1006-1027
• /
• 2022

In the crowdfunding market, various crowdfunding platforms can offer founders the possibilities to collect funding and launch someone's next campaign, project or events. Especially, healthcare crowdfunding is a field that is growing rapidly on health-related problems based on online platforms. One of the largest platforms, GoFundMe, has raised US$ 5 billion since 2010. Unfortunately, while providing crucial help to care for many people, it is also increasing risk of fraud. Using the largest platform of crowdfunding market, GoFundMe, we conduct an exhaustive search of detection on fraud from October 2016 to September 2019. Data sets are based on 6 main types of medical focused crowdfunding campaigns or events, such as cancer, in vitro fertilization (IVF), leukemia, health insurance, lymphoma and, surgery type. This study evaluated a detect of fraud process to identify fraud from non-fraud healthcare crowdfunding campaigns using various machine learning technics.

• Journal of Engineering Education Research
• /
• v.26 no.4
• /
• pp.36-46
• /
• 2023

This paper presents a case study and online-offline (hybrid) course structure for project-oriented community-based service learning in order to solve real-world problems for society. It examines social issues and conduct student projects to develop solutions that can generate sustainable value. This course helps students to use their major knowledge to assess and solve the problems faced by the local community. The outcomes of this course conducted via online lectures and offline project activities are discussed. The operation of this blended type of social problem-solving course is also stated.