• 한국환경과학회지
• /
• 제7권5호
• /
• pp.599-605
• /
• 1998

The purpose of this work was to examine whether X-Y chromosome dissociation in the primary spermatocytes of mice could be used as an in vivo short-term assaying system that detect environmental mutagens. Four alkylating agents(EMS, MMS, MMC and MNNG) which were known as strong mutagens were administered to BALB/c male mice 3-4 months old. In the control group, the mean frequencies of previously dissociated X and Y chromosomes and autosomes were 7.17% and 2.12%, respectively. Compared to the control group, mutagen-treated groups have no significant differences in dissociation rate of autosomes, while these poops were about 1.2-2.5 times higher in the frequencies of X-Y dissociation. Generally, X-Y dissociation frequency increased consistently with the concentration of mutagens whereas the tendency of autosome dissociation frequency was variable among several mutagens. These results suggest that X-Y dissociation in the primary spermatocytes of mice is applicable as an vivo short-term assaying system for environmental mutagens. There were significantly distinct increase in dissociation of X-Y chromosome in both the hybrid and parents but the X-Y previous dissociation of hybrid appeared higher frequency than BALB /c and wild mice. These results indicate that the factor related to binding X-Y chromosome is specific to strains.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.22-28
• /
• 2018

In case of developing a combined system by a number of distributed resources with storage device, a number of application suggests a huge capacity can derive operational flexibility both power supply issues or when unexpected situation imposed. However, it is important to determine a resonable energy capacity because the device have many controversial cost issues in current power system industry. An ESS application which focusing essentially required points can induce appropriate storage capacity that required in economic operation. In this paper, a curtailment supporting algorithm based on storage device is introduced, and applied in the capacity calculation method. The main algorithm pursues handling minor exceeding quantities which can cause mechanical load at blade; This paper tries to include it for configuring hybrid algorithm with pitch control. Several fluctuating conditions are utilized in simulation to reflect critical situation. The analyzing process focuses on the control feasibility with applied capacity and control method.

• 자동차안전학회지
• /
• 제8권2호
• /
• pp.30-36
• /
• 2016

According to revolutionary developments in automobile technologies, various electronically controlled components of vehicles are rapidly increasing. A variety of advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) using electrical energy source are increasing, too. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are equipped with more new electronic systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference (EMI) test and an electromagnetic susceptibility (EMS) test. In this paper, in order to investigate the electromagnetic interference in the cabin of vehicle by various electric and electronic components of vehicles, a series of narrowband electromagnetic emission tests are conducted. For comparison, the several digital home appliances (smartphone under charging, laptop compuer and digital camera), which are used a lot in daily lives, are tested.

• The Plant Pathology Journal
• /
• 제19권1호
• /
• pp.24-29
• /
• 2003

SS2-2, a hypernodulating soybean mutant was isolated by EMS mutagenesis from Sinpaldalkong 2. This auto-regulation mutant showed greater number of nodules and smaller plant size than its wild type Sinpaldalkong 2. SSR markers were used to identify DNA variation at SSR loci from different soybean LG. The only SSR marker that detected a length polymorphism between SS2-2 and its wild type ancestor was Satt294 on LG C1 instead of LG H, locating a hypernodulating gene. Sequencing data of flanking Satt294 indicated that the size variation was due to extra stretch of TTA repeats of the SSR motif in SS2-2, along with $A\longrightarrow$G transversion. In spite of phenotypic differences between the wild type and its hypernodulating mutants, genomic DNA poly-morphisms at microsatellite loci could not control regulation of nodule formation. The cDNA-AFLP method was applied to compare differential display of cDNA between Sinpaldalkong 2 and SS2-2. After isolation and sequence comparison with many AELP fragments, several interesting genes were identified. Northern blot analysis, immunolocalization and/or the yeast two-hybrid system with these genes might provide information on regulation of nodule development in SS2-2.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.694-701
• /
• 2016

According to revolutionary developments in automobile technologies, eco-friendly advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) are rapidly increasing. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are driven by electric energy and equipped with more electric systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference(EMI) test and an electromagnetic susceptibility(EMS) test. EMI test of the electric vehicles are needed not only in driving mode but also in charging mode because they must be recharged by much electric energy for driving. Depending on vehicle manufacturers, the charging device type and the location of charging device inlet in electric vehicles are various. In this paper, in order to investigate EMI of electric vehicles in charging mode in consideration of the direction of measuring antenna and the location of charging device inlet, a series of electromagnetic emission tests are conducted using three electric vehicles (neighborhood electric vehicle, electric vehicle and electric vehicle-bus). The test results show that electromagnetic emission measurements in charging mode are dependent on the direction of measuring antenna and the location of charging device inlet.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권3호
• /
• pp.157-163
• /
• 2019

현재까지 피크완화 및 에너지 절감을 위해 한국전력공사 120여개 사옥에 K-BEMS (KEPCO Building Energy Management System)가 운영 중이다. 이 시스템은 PV, PCS, BESS, EMS 등으로 구성되어 있으며 건물에너지 수요예측을 기반으로 BESS, PV 등을 활용하여 에너지 관리를 도모하고 있다. 이 시스템은 단기 과거데이터에 신경망기법을 단순 적용하여 수요를 예측함에 따라 예측 정확도가 높지 않고 운영자 수작업을 통한 BESS 충방전으로 피크 저감이 곤란하며 운영 경제성 제고가 어려운 실정이다. 이러한 문제를 해결하기 위해 전력연구원에서는 2016년부터 3년간 연구과제를 수행하였는데 이를 통해 에러를 최소화하며 높은 신뢰도를 가지는 실시간 수요예측기법과 이에 기반한 BESS충방전 최적화 자동화 기술 개발, 성능을 검증하였기에 이를 본 논문에서 소개하고자 한다.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.37-44
• /
• 2022

Plug-in Hybrid electric vehicles (PHEV) show great potential to reduce gas emission, improve fuel efficiency and offer more driving range flexibility. Moreover, PHEV help to preserve the eco-system, climate changes and reduce the high demand for fossil fuels. To address this; some basic components and energy resources have been used, such as batteries and proton exchange membrane (PEM) fuel cells (FCs). However, the FC remains unsatisfactory in terms of power density and response. In light of the above, an electric storage system (ESS) seems to be a promising solution to resolve this issue, especially when it comes to the transient phase. In addition to the FC, a storage system made-up of an ultra-battery UB is proposed within this paper. The association of the FC and the UB lead to the so-called Fuel Cell Battery Electric Vehicle (FCBEV). The energy consumption model of a FCBEV has been built considering the power losses of the fuel cell, electric motor, the state of charge (SOC) of the battery, and brakes. To do so, the implementing a reinforcement-learning energy management strategy (EMS) has been carried out and the fuel cell efficiency has been optimized while minimizing the hydrogen fuel consummation per 100km. Within this paper the adopted approach over numerous driving cycles of the FCBEV has shown promising results.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.91-99
• /
• 2023

Participation in power trading using surplus power is considered a business model active in the domestic energy trade market, but it is limited only if the legal requirements according to the type, capacity, and use of the facilities to be applied for are satisfied. The hydrogen residential demonstration model presented in this paper includes solar power, energy storage system (ESS), fuel cell, and water electrolysis facilities in electrical facilities for private use with low-voltage power receiving system. The concept of operations strategy for this model focuses on securing the energy self-sufficiency ratio of the entire system, securing economic feasibility through the optimal operation module installed in the energy management system (EMS), and securing the stability of the internal power balancing issue during the stand-alone mode. An electric facility configuration method of a hydrogen residential complex demonstrated to achieve this operational goal has a structure in which individual energy sources are electrically connected to the main bus, and ESS is also directly connected to the main bus instead of a renewable connection type to perform charging/discharging operation for energy balancing management in the complex. If surplus power exists after scheduling, participation in power trading through reverse transmission parallel operation can be considered to solve the energy balancing problem and ensure profitability. Consequentially, this paper reviews the legal regulations on participation in electric power trading using surplus power from hydrogen residential models that can produce and consume power, gas, and thermal energy including hybrid distributed power sources, and suggests action plans.