• 전자공학회논문지
• /
• 제52권5호
• /
• pp.10-22
• /
• 2015

이최근, 3GPP (3rd Generation Partnership Project) 에서는 폭발적으로 증가하고 있는 모바일 데이터 트래픽을 수용하기 위하여 사이드홀 (Sidehaul) 시스템을 개발하고 이에 대한 연구가 활발히 진행되고 있다. 사이드홀 시스템은 낮은 PAPR (Peak to Average Power Ratio)을 위해 SC-FDMA (Single Carrier-Frequency Division Multiple Access)를 기반으로 한다. 또한 제한된 공간에서 안테나 배열을 사용함으로써 MIMO (Multiple Input Multiple Output) 전송이 가능하게 한다. 본 논문에서는 사이드홀 시스템에서 ULA (Uniform Linear Array), UCA (Uniform Circular Array) 및 UPA (Uniform Planar Array)에 대한 안테나 배열을 설계하고 성능을 분석한다. 또한, 이웃셀로 부터 간섭의 영향을 줄이기 위하여 새로운 하이브리드 수신기 FSC(Full Suppression Cancellation)를 제안한다. 제안한 수신기는 IRC (Interference Rejection Combining)와 SIC (Successive Interference Cancellation)를 결합하여 간섭을 억제 및 제거 할 수 있다.

• 한국전자파학회논문지
• /
• 제22권7호
• /
• pp.737-743
• /
• 2011

본 논문에서는 커플링 급전 구조를 사용하여 모든 이동 통신 대역을 만족하는 단말기용 모노폴+IFA(Inverted F Antenna) 하이브리드 안테나를 설계하고 이를 제작하였다. 1개의 급전 구조를 가지면서도 커플링을 이용하여 모노폴과 IFA가 동시에 동작하도록 함으로써 넓은 대역 특성을 갖도록 하였다. 안테나는 저가격 실현을 위해 carrier 부품이 없는 PCB embedded 형태로 설계하였다. 베어 보드로 제작된 안테나는 LTE/CDMA/GSM900/DCS/USPCS/WCDMA/WiBro/WiFi 대역에서 VSWR 2.5:1 특성을 만족하였다. 평균 이득과 효율은 LTE, CDMA, GSM-900 대역에서 -3.98~-0.09 dBi 및 40.03~97.99 %가 측정되었다. 또한, DCS, USPCS, WCDMA, WiBro, WiFi 대역에서는 -3.90~-1.01 dBi 및 40.70~79.31 %의 효율 특성을 가짐으로써 LTE를 포함한 휴대폰 전 대역 안테나로 사용될 수 있음을 보였다.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• 한국전자파학회논문지
• /
• 제26권4호
• /
• pp.357-364
• /
• 2015

본 논문에서는 6중 이동통신 대역을 만족하는 단말기용 PIFA(Planar Inverted F Antenna) + IFA(Inverted F Antenna) 하이브리드 MIMO(Multi Input Multi Output) 안테나를 설계하고, 이를 구현하였다. 커플링 급전구조를 이용하여 PIFA와 IFA가 동시에 동작하도록 함으로써 접지 면이 많은 현재의 스마트폰에 효과적으로 적용될 수 있도록 시도하였다. 후면이 접지인 부분에는 PIFA를 설계하였고, 접지가 없는 휴대폰 상단 작은 공간에는 IFA를 설계하였다. 안테나는 폰과 동일한 크기로 carrier가 없는 PCB embedded로 대각선 급전 MIMO 안테나로 구현하였다. 베어보드에 구현된 안테나는 CDMA, GSM900, DCS, KPCS, USPCS, WCDMA의 6중 이동통신 서비스 대역에서 VSWR 3 : 1 이하의 특성을 만족하였다. 평균이득과 효율은 CDMA, GSM900대역에서 -5.19~-3.16 dBi 및 30.27~48.26 %를 보였다. 또한, DCS, KPCS, USPCS, WCDMA 대역에서는 -9.50~-5.19 dBi의 평균이득과 11.23~30.28 %의 효율특성을 가짐으로써 휴대폰 안테나로 적용될 수 있음을 보였다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.480-489
• /
• 2016

A novel hybrid carrier-based pulse width modulation (CBPWM) scheme that combines unipolar and dipolar modulations is proposed for single-phase three-level rectifiers, which are widely applied in railway traction drive systems. The proposed CBPWM method can satisfy the volt-second balancing principle in the complete modulation index region through overmodulation compensation. The modulation scheme features two modulation modes: unipolar and dipolar. The operation range limits of these modulation modes can be modified by changing the separation coefficient. In comparison with the traditional unipolar CBPWM, the proposed hybrid CBPWM scheme can provide advantageous features, such as lower high-order harmonic distortion of the line current and better utilization of switching frequency. The separation coefficient value is optimized to achieve the maximum utilization of these advantages. The experimental results verify the feasibility and effectiveness of the proposed hybrid CBPWM scheme.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.251.2-251.2
• /
• 2013

Natural photosynthesis utilizes two proteins, photosystem I and photosystem II, to efficiently oxidize water and reduce NADP+ to NADPH. Artificial photosynthesis which mimics this process achieve water splitting through a two-step Z-schematic water splitting process using man-made synthetic materials for hydrogen fuel production. In this study, Z-scheme system was achieved from the hybrid materials which composed of hydrogen production part as photosystem I protein and water oxidizing part as semiconductor BiVO4. Utilizing photosystem I as the hydrogen evolving part overcomes the problems of existing hydrogen evolving p-type semiconductors such as water instability, expensive cost, few available choices and poor red light (>600 nm) absorbance. Some problems of photosystem II, oxygen evolving part of natural photosynthesis, such as demanding isolation process and D1 photo-damage can also be solved by utilizing BiVO4 as the oxygen evolving part. Preceding research has not suggested any protein-inorganic-hybrid Z-scheme composed of both materials from natural photosynthesis and artificial photosynthesis. In this study, to realize this Z-schematic electron transfer, diffusion step of electron carrier, which usually degrades natural photosynthesis efficiency, was eliminated. Instead, BiVO4 and Pt-photosystem I were all linked together by the mediator gold. Synthesized all-solid-state hybrid materials show enhanced hydrogen evolution ability directly from water when illuminated with visible light.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.129-140
• /
• 2004

This paper addresses solutions th the challenges of carrier phase integer ambiguity resolution and cycle slip detection/identification, for maintaining high accuracy of an integrated GPS/Pseudolite/INS system. Such a hybrid positioning and navigation system is an augmentation of standard GPS/INS systems in localized areas. To achieve the goal of high accuracy, the carrier phase measurements with correctly estimated integer ambiguities must be utilized to update the system integration filter's states. The contribution presents an effective approach to increase the reliability and speed of integer ambiguity resolution through using pseudolite and INS measurements, with special emphasis on reducing the ambiguity search space. In addition, an algorithm which can effectively detect and correct the cycle slips is described as well. The algorithm utilizes additional position information provided by the INS, and applies a statistical technique known as th cumulative-sun (CUSUM) test that is very sensitive to abrupt changes of mean values. Results of simulation studies and field tests indicate that the algorithms are performed pretty well, so that the accuracy and performance of the integrated system can be maintained, even if cycle slips exist in the raw GPS measurements.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 Korea-Russia Joint Conference on Geometics
• /
• pp.82-94
• /
• 2004

This paper addresses solutions to the challenges of carrier phase integer ambiguity resolution and cycle slip detection/identification, for maintaining high accuracy of an integrated GPS/Pseudolite/INS system. Such a hybrid positioning and navigation system is an augmentation of standard GPS/INS systems in localized areas. To achieve the goal of high accuracy, the carrier phase measurements with correctly estimated integer ambiguities must be utilized to update the system integration filter's states. The occurrence of a cycle slip that is undetected is, however, can significantly degrade the filter's performance. This contribution presents an effective approach to increase the reliability and speed of integer ambiguity resolution through using pseudolite and INS measurements, with special emphasis on reducing the ambiguity search space. In addition, an algorithm which can effectively detect and correct the cycle slips is described as well. The algorithm utilizes additional position information provided by the INS, and applies a statistical technique known as the cumulative-sum (CUSUM) test that is very sensitive to abrupt changes of mean values. Results of simulation studies and field tests indicate that the algorithms are performed pretty well, so that the accuracy and performance of the integrated system can be maintained, even if cycle slips exist in the raw GPS measurements.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1978-1988
• /
• 2004

Hybrid finite element analysis was used to analyze the influence of bearing stiffness on the static properties of a planetary gear system with manufacturing errors. The effects of changes in stiffness were similar for most of the manufacturing errors. State variables were most affected by the stiffness of the planet ,bearings. Floating either the sun or carrier helps to equal load sharing and minimizes the critical tooth stress. The effects of a floating sun and carrier are similar, but it is not recommended that both float, because this can induce greater critical tooth stress. Planet bearing stiffness should be optimized. Both load sharing and critical tooth stress should be considered to determine optimal bearing stiffness.

• 한국동물학회지
• /
• 제34권3호
• /
• pp.389-393
• /
• 1991

To obtain monozygotic multiplets from 8-cell mouse embryos, we artificially constructed chimeric embryos by introducing one blastomere (donor) of 8-cell embryos of Fl hybrid (C57BL/6 X CBA) mice into 4-cell ICR mouse embryos (carrier) of which one blastomere had been previously removed with a micromanipulator. After 42 h of culture, the developmental frequency of chimeric embryos to normal morula and blastocyst was 95% (310/328). When chimeric embryos at morula or blastocvst stage were transferred to pseudopregnant mice,39%, (70/180) of them were born. Most of the offspring (56/70) were the carrier type in coat color, whereas only three of them were the donor type, of which ho were assumed to be derived from single 8-cell donor embryo. Because the two donor type mice Ivere the same sex and produced only the donor type offspring from a testcross, they are probably monozvgotic multiplets of 8-cell mouse embryos. However, since their internal chimerism was not able to be examined, it remains to be determined if their genetic constitutions are identical.