• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.75-81
• /
• 1999

In this paper, the details of electronically controlled CVT is described , which Kia Motor company recently developed in prototype form for hybrid passenger car. This transmission has two input shafts, one for engine and the other for traction motor. The shaft for traction motor is located at rear side which is extended from primary pulley shaft and connected to traction motor through adapter gear box. Adopting two input system, various driving mode is available such as motor alone driving in hybrid vehicle application. As far as electrohydraulic system concerned , this transmission uses two bleed type variable force solenoids for line pressure and ratio control, and one on-off solenoid for clutch control. Another feature for this transmission is that oil pump for transmission is separate from CVT for supplying oil pressure even at vehicle standstill.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.27-33
• /
• 2013

In this study we analyzed the on-road driving performance of two parallel-type diesel-hybrid buses which have been driven in Daegu metropolitan area. A real-time on-board data logger was facilitated to measure the vehicle information such as vehicle speed, idle stop, state of charge of battery, and engine operating conditions. These diesel-hybrid buses ran as a commuter at Daegu Exco area and Dalsung industrial complex. The driving pattern in Exco area comprised more frequent idle stop and relatively lower speed than at Dalsung area, where comprised no idle stop. Due to those different driving patterns, the fuel economy at Dalsung showed $3.7\;km/{\ell}$, which is about 8% higher than that of Exco. The main causes of this come from the higher portion of regenerative braking and higher speed which moves to the operating points of diesel engine with a lower fuel consumption.

• 서비스연구
• /
• 제14권1호
• /
• pp.27-43
• /
• 2024

중고차 시장에서 온라인 플랫폼 서비스의 시장 점유율은 지속적으로 증가하고 있다. 또한 중고차 온라인 플랫폼 서비스는 서비스 이용자에게 차량의 제원, 사고 이력, 점검 내역, 세부 옵션, 그리고 중고차의 가격 등을 공개하고 있다. 2023년 현재 국내 자동차 시장에서 SUV 차종의 신차 점유율은 50% 이상으로 확대되었으며, 하이브리드 차종은 신차 판매량이 지난해에 비해 두 배 이상 증가하였다. 이에 따라 이들 차종은 국내 중고차 시장에서도 인기를 끌고 있다. 기존 연구는 전체 차량 또는 브랜드별 차량을 대상으로 머신러닝 모델을 실행하여 중고차 가격 예측 모델을 제안하였다. 반면 국내 자동차 시장에서 SUV와 하이브리드 차종의 인기는 매년 상승하고 있으나, 이들 차종을 대상으로 중고차 가격 예측 모델을 제안한 연구는 찾기 어려웠다. 본 연구는 국내 시장에서 자국 브랜드가 생산한 세단, SUV, 그리고 하이브리드 차종을 대상으로 차량 제원과 옵션, 총 72개의 특성을 활용하여 이들 차종별 가장 우수한 중고차 가격 예측 모델을 선정하였다. 이를 위해 특성 선택으로 Lasso 회귀 모델을 활용하여 특성을 선별한 후 동일 샘플링으로 앙상블 모델을 실행하였다. 그 결과 모든 차종에서 최우수 모델은 CBR 모델로 선정되었으며, 차종별 최우수 모델을 대상으로 Tree SHAP Value의 시각화를 실행하여 특성의 기여도 및 방향성을 확인하였다. 본 연구의 시사점으로 온라인 플랫폼 서비스를 이용하는 매매관계자에게 차종별 중고차 가격 예측 모델을 제안하고 특성의 기여 수준과 방향성을 확인함으로써 이들 간 정보의 비대칭으로 야기된 문제 해결에 지원이 될 것으로 기대한다.

• The Journal of the Acoustical Society of Korea
• /
• 제18권3E호
• /
• pp.3-8
• /
• 1999

In speech recognition for real-world applications, the performance degradation due to the mismatch introduced between training and testing environments should be overcome. In this paper, to reduce this mismatch, we provide a hybrid method of spectral subtraction and residual noise masking. We also employ multiple model approach to obtain improved robustness over various noise environments. In this approach, multiple model sets are made according to several noise masking levels and then a model set appropriate for the estimated noise level is selected automatically in recognition phase. According to speaker independent isolated word recognition experiments in car noise environments, the proposed method using model sets with only two masking levels reduced average word error rate by 60% in comparison with spectral subtraction method.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.519-524
• /
• 2014

The use of light weight magnesium alloy offers significant potential towards improvement of the automotive fuel efficiency. However, the application of formed magnesium alloy components in auto-body structures is restricted due to the low formability at room temperature and lack of knowledge for processing magnesium alloys at elevated temperatures. In this study, a warm tensile test of magnesium alloys was performed to measure tensile strength and elongation. An improvement in formability was confirmed at increased temperatures above about $250^{\circ}C$. Car body warm forming technology was conducted for forming forming reinforced dash components of the magnesium alloy AZ31B sheet at elevated temperatures.

• 전자공학회논문지
• /
• 제53권4호
• /
• pp.27-34
• /
• 2016

철도 차량은 일렬로 연결되는 구조적 특수성이 있으므로 네트워크 토폴로지를 구성하는 경우에서도 이를 고려하여야 한다. 또한 차량 내의 장치 간 연결에서의 토폴로지와 차량 간 연결에서의 토폴로지를 구분하여야 한다. 차량 간 연결에 있어서 기존의 링, 스타, 데이지체인, 버스 등의 토폴로지 대신 이를 조합한 하이브리드 토폴로지가 제안되었다. 이는 일렬로 연결된 철도 차량을 적절한 수의 그룹으로 묶고 그룹 내에서는 스타 네트워크 토폴로지로 구성하고 그룹 간 연결은 데이지체인 네트워크 토폴로지로 구성하는 방식이다. 이를 통해 하이브리드 토폴로지는 스타 토폴로지에 비해 차량 간 연결에 필요한 케이블의 수를 절감하고도 적절한 전송 속도를 유지할 수 있다. 하이브리드 토폴로지는 스타와 데이지 체인 두 가지 토폴로지를 절충하는 방식이므로 각각의 장점을 잘 활용할 수 있도록 그룹 내 차량의 수를 적절히 선정하는 것이 중요하다. 본 논문에서는 철도차량에서 최적의 하이브리드 네트워크 토폴로지를 구하는 것을 목적으로 한다. 이를 위해 차량 별로 데이터 생성 크기와 생성 주기가 동일하다는 가정 하에 차량 간 연결에서의 최대 케이블 수와 전송 속도에 대하여 각각 가중치를 별도로 두고 가중치 별로 전체 차량 수에 따른 최적의 그룹 내 차량의 수를 도출한다.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.205-213
• /
• 2017

In order to improve occupant protection in frontal crash, the IIHS introduced a small overlap frontal crash test in 2012. When the front corner of a car collides with another car or object, such as utility pole the test replicated the sequence of events. Because occupants move simultaneously forward and toward the side of the vehicle this test is challenging for some airbag and safety belt designs. In the small overlap frontal test, a car travels at 64 km/h toward a rigid barrier. A hybrid III dummy is positioned in the driver seat. 25% of the total width of the car strikes the barrier on the driver side. After review of small overlap frontal test protocol and overall rating, six run-throughs were performed according to the original test method.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.715-720
• /
• 2006

This research investigates injury values and vehicle deformation for vehicle frontal crash compatibility. To investigate compatibility in an individual case, it is possible to impact two vehicles and evaluate the injury values and deformations in both vehicles. In this study, four tests were conducted to evaluate compatibility. A large and mini vehicle were subjected to a frontal car-to-car crash test at a speed of 48.3 km/h with an offset of 40%. An inclination car-to-car crash test using the large and small vehicle were conducted at 30 km/h at a $30^{\circ}$ angle. The results of the 48.3 km/h, car-to-car frontal crash revealed extremely high injury values on the chest and upper leg of the Hybrid III 50% driver dummy with seatbelt in the mini vehicle compared to the large vehicle. For the 30 km/h, car-to-car inclination crash, however, injury values in the small vehicle were 1.5 times higher compared to the large vehicle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.866-867
• /
• 2011

As part of the green growth, The Green Car has attracted wide attention. Types of the Green Car are Electric Vehicle, Plug-in Hybrid Electric Vehicle, Hybrid Electric Vehicle, Fuel Cell Vehicle and Clean Diesel Vehicle. Of these, The electric vehicle is equipped with the BDU(Battery Disconnecting Unit). BDU is supplying stable battery power and blocking it to protect electrical system of the electric vehicle. The BDU consists of electric components such as current sensor, fuse and pre-charge resistor. These must pass Voltage withstand test, Salt mist test, Thermal shock test, Vibration test and Short-circuit test commonly to verify reliability of the electric components. In addition, The current sensor should be verified whether normal operation. The breaking capacity of fuse should be verified. The durability of pre-charge resistor should be verified by supplying battery power and blocking it repeatedly. The reliability of BDU as well as the electric vehicle is secured by verifying the reliability of electric components. In addition, It will contribute to the acceleration and promotion of Green Car Technology.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.120-127
• /
• 2013

Hybrid electric vehicles have applied electric parts for saving fuel consumption and reducing levels of environmental pollution. Electrification of automobiles is indispensable for entering into global market because of enhanced environment restriction. ISG (Integrated Starter & Generator) system is one of main electric parts and can improve fuel efficiency more than other components by using Idle Stop & Go function and regenerative braking system. However, if ISG motor and inverter work under the continuously high load condition, it will make them the decrease of performance and durability. So the ISG motor and inverter need to properly design the cooling system of them. In this study, we suggested the enhancement points by modifying the thermal design of ISG motor and then confirmed the improvement of the cooling performance.