• 제목/요약/키워드: Hybrid Antenna

검색결과 147건 처리시간 0.027초

The Design of Calculable Standard Dipole Antennas in the Frequency Range of 1~3 GHz

  • Kim, Ki-Chai;Kim, Sang-Myeong;Kwon, Jae-Yong;Kang, Tae-Weon;Kim, Jeong-Hwan
    • Journal of electromagnetic engineering and science
    • /
    • 제12권1호
    • /
    • pp.63-69
    • /
    • 2012
  • This paper presents the design of a calculable standard dipole antenna with a hybrid balun in the frequency range of 1 GHz to 3 GHz. A new formula of the antenna factor for a dipole antenna with a hybrid balun is derived using the power mismatch-loss concept. The antenna factors derived in this paper are in good agreement with the results calculated from S-parameters. The design results show that the calculable dipole antenna with a hybrid balun can be characterized by power mismatch-loss component factors.

Hybrid MIMO Antenna Using Interconnection Tie for Eight-Band Mobile Handsets

  • Lee, Wonhee;Park, Mingil;Son, Taeho
    • Journal of electromagnetic engineering and science
    • /
    • 제15권3호
    • /
    • pp.185-193
    • /
    • 2015
  • In this paper, a hybrid multiple input multiple output (MIMO) antenna for eight-band mobile handsets is designed and implemented. For the MIMO antenna, two hybrid antennas are laid symmetrically and connected by an interconnection tie, thereby enabling complementary operation. The tie affects both the impedance and radiation characteristics of each antenna. Further, printed circuit board (PCB) embedded type is applied to the antenna design. To verify the results of this study, we designed eight bands-LTE class 12, 13, and 14, CDMA, GSM900, DCS1800, PCS, and WCDMA-and implemented them on a bare board the same size as the real board of a handset. The voltage standing wave ratio (VSWR) is within 3:1 over the entire design band. Antenna isolation is less than -15 dB at the lower band, and -12 dB at the WCDMA band. Envelope correlation coefficient (ECC) of 0.0002-0.05 is obtained for all bands. The average gain and efficiency are measured to range from -4.69 dBi to -2.88 dBi and 33.99% to 51.5% for antenna 1, and -4.74 dBi to -2.97 dBi and 33.45% to 50.49% for antenna 2, respectively.

Design of a Compact Antenna Array for Satellite Navigation System Using Hybrid Matching Network

  • Lee, Juneseok;Cho, Jeahoon;Ha, Sang-Gyu;Choo, Hosung;Jung, Kyung-Young
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.2045-2049
    • /
    • 2018
  • An antenna arrays for a satellite navigation systems require more antenna elements to mitigate multiple jamming signals. In order to maintain the small array size while increasing the number of antenna elements, miniaturization technique is essential for antenna design. In this work, an electrically small circular microstrip patch antenna with a 3 dB hybrid coupler is designed as an element antenna, where the 3 dB hybrid coupler can yield the circularly polarized radiation characteristic. The miniaturized element antenna typically has too large capacitance in GPS L1 and GLONASS G1 bands, making it difficult to match with a single stand-alone non-Foster matching circuit (NFMC) in a stable state. Therefore, we propose a new matching technique, referred to as the hybrid matching method, which consists of a NFMC and a passive circuit. This passive tuning circuit manages reactance of antenna elements at an appropriate capacitance without a pole in the operating frequency range. The antenna array is fabricated, and the measured results show a reflection coefficient of less than -10 dB and an isolation of greater than 50 dB. In addition, peak gain of the proposed antenna is increased by 22.3 dB compared to the antenna without the hybrid matching network.

5.8㎓ 대역 무선 LAN용 하이브리드 슬롯 안테나 설계 및 제작 (Design and Fabrication of the Hybrid Slot Antenna for Wireless LAN at 5.8㎓ Band)

  • 고수미;이권익;김흥수
    • 대한전자공학회논문지TC
    • /
    • 제39권10호
    • /
    • pp.21-26
    • /
    • 2002
  • 본 논문에서는 충분한 대역폭과 이득을 갖는 5.8㎓ 대역의 무선 LAN용 하이브리드 슬롯 안테나를 설계하고 제작하였다. 설계한 안테나는 유도성 급전 슬롯과 용량성 급전슬롯을 결합한 형태이다. 광대역을 얻기 위하여 유도성 급전 슬롯은 5.,3 ㎓에서 설계하였고,용량성 급전 슬롯은 5.8㎓ 에서 설계하였다. 설계시 주요 파라미터는 슬롯 폭과 CPW의 길이이다. 안테나는 Ensemble 6.0을 사용하여 시뮬레이션 하였으며 시뮬레이션 결과와 실제 제작한 안테나의 특성을 비교하였다. 제작된 하이브리드 슬롯 안테나의 공진 주파수는 5.8 ㎓이고, VSWR<1.5를 기준으로 하여 28%의 대역폭과 5 ㏈i의 이득을 얻었다. E-면과 H-면의 빔폭은 각각 60°와 44°이다.

데이터통신 단말기용 PIFA 및 IFA 결합 안테나 (PIFA and IFA Hybrid Antenna for the Data Communication Terminal)

  • 천문규;손태호
    • 한국ITS학회 논문지
    • /
    • 제10권4호
    • /
    • pp.65-70
    • /
    • 2011
  • 본 논문에서는 PIFA(Planer Inverted F Antenna)와 IFA(Inverted F Antenna)를 결합한 스마트 폰과 같은 데이터통신 단말기용 안테나를 설계하고 이를 제작하였다. 1개의 급전구조를 가지면서 PIFA와 IFA가 동시에 동작하도록 함으로써 다중대역특성을 갖도록 하였다. 베어보드에 제작된 안테나는 GSM900/USPCS/WCDMA 대역에서 VSWR 3:1 특성을 만족하였다. 평균이득과 효율은 GSM900 대역에서 -2.19~-3.63 dBi 및 43.31~60.33 %가 측정되었다. 또한 USPCS /WCDMA 대역에서는 -2.16~-10.67 dBi 및 8.56~60.78 %의 효율특성을 갖는다.

Hybrid Planar Inverted-F Antenna with a T-Shaped Slot on the Ground Plane

  • Jeon, Sin-Hyung;Choi, Hyeng-Cheul;Kim, Hyeong-Dong
    • ETRI Journal
    • /
    • 제31권5호
    • /
    • pp.616-618
    • /
    • 2009
  • In this letter, a novel hybrid planar inverted-F antenna (PIFA) with a T-shaped slot on the ground plane is proposed. The loop structure formed by the feed line and shorting pin can be operated as a series and shunt inductance for the PIFA and the T-shaped slot antenna, respectively. The PIFA operates at a frequency of 1.75 GHz, while the T-shaped slot on the ground plane operates at 2.4 GHz by the same voltage feeding source. The height of the PIFA is 6.5 mm, and the size of an upper patch is designed to be 30 mm${\times}$16 mm. The measured relative impedance bandwidth of the PIFA and the T-shaped slot are about 12% and 21%, respectively. In addition, good antenna performance was achieved.

휴대용 단말기를 위한 블레이드 하이브리드 안테나 (Vlade Hybrid Antenna for the Mobile Phone Handset Terminal)

  • 오규종;손태호
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.165-169
    • /
    • 2011
  • 최근 휴대단말기는 다양한 기능이 첨가되고 슬림화와 소형화 추세에 따라 내장형 안테나의 수납공간이 더욱 협소해지고 있다. 또 안테나가 복잡한 부품으로 둘러싸인 단말기 내부의 좁은 공간에 수납됨으로서 대역폭 확보가 어렵고 임피던스가 낮아지게 된다. 게다가 주변의 부품들에 의한 편파 손실이 추가됨으로써 낮은 효율로 인해 원하는 안테나 이득을 발생시키는데 어려움이 따른다. IFA는 모노폴 안테나를 변형시킨 ILA(Inverted L Antenna)를 기본으로 하는 낮은 프로파일(low profile) 구조의 안테나로, 휴대폰 내장형 안테나에 적합한 여러 장점을 가지고 있으나 모노폴 안테나에 비해 이득이 떨어지고 대역폭이 좁은 단점을 가지고 있다. 본 논문에서는 커플링 급전 구조를 사용한 블레이드 하이브리드 안테나를 제안한다.

Dual-Polarized Annular Ring Patch Antenna for 2.4 GHz Doppler Radar

  • Kim, Seong-Ho;Yook, Jong-Gwan;Cho, Sung-Ho;Jang, Byung-Jun
    • Journal of electromagnetic engineering and science
    • /
    • 제10권3호
    • /
    • pp.183-185
    • /
    • 2010
  • A 2.4 GHz dual-polarized antenna for a Doppler radar is studied. The proposed dual-polarized antenna using a stacked annular ring patch with two co-centric gap-coupled feed lines and a $90^{\circ}$ hybrid exhibits fairly good performance of 22 dB isolation at a center frequency of 2.4 GHz. Using a $90^{\circ}$ hybrid, a right-handed circular polarization for the transmitter and a left-handed circular polarization for the receiver are implemented. The gain of the designed antenna is about 0 dBi over operating frequencies. The antenna size including a ground plane is only $40{\times}40\;mm^2$.

보조 슬롯에 의한 메탈 폰 MIMO 안테나 (Metal Phone MIMO Antenna with Auxiliary Slot)

  • 이원희;박민길;손태호
    • 한국전자파학회논문지
    • /
    • 제26권3호
    • /
    • pp.248-256
    • /
    • 2015
  • 본 논문에서는 4G 이동 통신을 위한 메탈 폰용 보조 슬롯 하이브리드 MIMO 안테나를 설계하고, 이를 제작하였다. 보조 슬롯은 단말기 후면 메탈 커버에 슬롯을 내어 LTE class 40 대역을 담당하게 하였다. 보조 슬롯은 모노폴 안테나와 함께 하이브리드로 동작한다. 제안 안테나는 LTE class 13/ LTE class 14/ CDMA/ GSM/ DCS/ PCS/ W-CDMA/ LTE class 40 대역에서 VSWR 3:1 이하의 조건을 만족하였다. MIMO 동작을 위한 ECC(Envelope Correlation Coefficient)는 전 대역에서 0.2 이하의 특성을 보였다. MTG 무반사실 측정한 안테나의 평균 이득은 -5.57~-1.45 dBi이고, 효율은 27.75~71.6%로 측정되었다.

상용 90도 하이브리드 커플러를 이용한 5.8GHz 대역 4×4 버틀러매트릭스 설계 (Design of 5.8GHz Band 4×4 Butler Matrix using Commercial 90° Hybrid Coupler)

  • 박병훈
    • 전기학회논문지P
    • /
    • 제63권3호
    • /
    • pp.200-205
    • /
    • 2014
  • In this paper, 5.8GHz band $4{\times}4$ Butler matrix is designed using easily accessible commercial $90^{\circ}$ hybrid coupler and semirigid coaxial cable as a transmission line. This Butler matrix is very flexible to changes of antenna system specification like a frequency band because $90^{\circ}$ hybrid coupler changing is all to do. The result of design is the distance of $2{\times}2$ array antenna element is $\sqrt{2}{\lambda}/4$, the 4 beam directions are diagonal of array antenna and phase shifter is not necessary. The beam width is roughly $25^{\circ}$ narrower because of array antenna geometry and the side lobe is about 10dB higher partially than theoretical beam pattern. But the overall beam pattern is similar with theoretical beam. This Butler matrix can be applied to switching beam antenna of 5.8GHz band Wi-Fi and WAVE system.