• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.38-43
• /
• 2012

Purpose: Patients injected with FDG use the bathroom that Measured surface contamination level and spatial dose rate. This study about the effect that result affects workers in same part. Materials and Methods: Group1 is St. Vincent' s hospital's 60case. Group 2 is Bucheon St. Mary's hospital's 50case. Last case is lower the average daily number of patients than group 2. Measured time is 8:00, 10:00, 13:00, 15:00 and 17:00. Measured part is 4 point of toilet, basin and wastepaper basket, also measured accumulation dose of toilet during 3 month. Hospitals is installed PET/CT ware surveyed on presence of bathroom that used only by patient and worker has been using the bathroom. Results: The highest average surface contamination level of toilet is group1($8.38{\pm}4.56$), but the highest spatial dose rate is group3. Cumulative exposure dose measured by TLD during 3months is St.Vincent's hospital 0.78 mSv and Bucheon St.Mary's hospital 0.37 mSv. And result of survey is 16.12% worker using the bathroom. Conclusions: The more daily number of patient, the higher surface contamination level of bathroom. Especially, wastepaper basket's surface contamination level is exceed the reference value $4Bq/cm^2$. Based on This survey, Bathroom require special attention and proper decontamination.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.24-31
• /
• 2016

BACKGROUND: Heavy metal adsorption not only depends on rapid cooling slag(RCS) characteristics but also on the nature of the metals involved and on their competitive behavior for RCS adsorption sites. The goal of this study was to investigate the competitive absorption characteristics of Cu, Cd and Zn in single- and multi-metal forms by RCS.METHODS AND RESULTS: Both single- and multi-metal adsorption experiments were conducted to determine the adsorption characteristics of RCS for the heavy metals. Adsorption behaviors of the heavy metals by RCS were evaluated using both the Freundlich and Langmuir adsorption isotherm equations. The maximum adsorption capacities of metals by RCS were in the order of Cu(16.6 mg/g) > Cd(8.1 mg/g) > Zn(6.2 mg/g) in the single-metal adsorption isotherm and Cu(14.5 mg/g) >> Zn(1.3 mg/g) > Cd(0.6 mg/g) in the multi-metal adsorption isotherm. Based on data obtained from Freundlich and Langmuir adsorption models and three-dimensional simulation, multi-metal adsorption behaviors differed from single- metal adsorption due to competition. Cadmium and Zn were easily exchanged and substituted by Cu during multi-metal adsorption.CONCLUSION: Results from adsorption experiments indicate that competitive adsorption among metals increases the mobility of these metals.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2014

BACKGROUND: The ferronickel and rapid cooling slags used in present study are industrial wastes derived from a steel factory in Korea. These slags are used as almost road construction materials after magnetic separation. However, the use of slag to remove phosphorus from wastewater is still a relatively less explored. The objective of this work was to evaluate the feasibility of ferronickel slag (FNS) and rapid cooling slag (RCS) as sorbents for phosphorus removal in wastewater. METHODS AND RESULTS: Adsorption experiments were conducted to determine the adsorption characteristics of the FNS and RCS for the phosphorus. Adsorption behaviour of the phosphorus by the FNS and RCS was evaluated using both the Freundlich and Langmuir adsorption isotherm equations. FNS and RCS were divided into two sizes as effective sizes. Effective sizes of FNS and RCS were 0.5 and 2.5 mm, respectively. The adsorption capacities (K) of the phosphorus by the FNS and RCS were in the order of RCS 0.5 (0.5105) > RCS 2.5 (0.3572) ${\gg}$ FNS 2.5 (0.0545) ${\fallingdotseq}$ FNS 0.5 (0.0400) based on Freundlich adsorption isotherm. The maximum adsorption capacities (a; mg/kg) of the phosphorus determined by the Langmuir isotherms were in the order of RCS 0.5 (3,582 mg/kg) > RCS 2.5 (2,983 mg/kg) > FNS 0.5 (320 mg/kg) ${\fallingdotseq}$ FNS 2.5 (187 mg/kg). RCS 0.5 represented the best sorbent for the adsorption of phosphorus. In the experiment, the Langmuir model showed better fit with our data than the Freundlich model. CONCLUSION: This study indicate that the use of RCS in constructed wetlands or filter beds is a promising solution for phosphorus removal via adsorption and precipitation mechanisms.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.109-120
• /
• 2017

In order to examine how Radiological Technologists perceive the oriental doctor's use of Medical Imaging Equipment, surveys were conducted for the members of the Korean Radiological Technologists Association. The total number of respondents were 515 and 481, with 34 insincere responses removed caused of nonvalidated answer. The results of the analysis are as follows. Although there were no statistical significance in the difference in perception by location of residence, work place, and educational background, respondents with higher education showed a tendency to agree on the use of comprehensive medical imaging equipment, but tended to oppose the use of special medical imaging equipment. Differences in perception by gender showed a greater negative perception toward the oriental doctor's use of medical imaging equipment by women than men. In particular, women showed more negative tendency for oriental doctor's use of special medical imaging equipment such as MRI, CT, and ultrasound equipment compared to men, and this was statistically significant. The difference in perception by age showed that the oriental doctor's use of medical imaging equipment was negative in the 20~30s, neutral in the 40~50s, and positive in the 60s, which were statistically significant. The difference in perception by work experience showed that the longer the work experience was, the more positive it was toward oriental doctor's use of medical imaging equipment. Specifically, the most favorable tendency was found with work experience of more than 30 years, which was statistically significant. The results of this study revealed the Radiological Technologists' perceptions on the oriental doctor's use of Medical Imaging Equipment and this can contribute to the direction of public health promotion in the future.

• Korean Journal of Environmental Agriculture
• /
• v.9 no.2
• /
• pp.83-95
• /
• 1990

This study was conducted to estimate influences of pesticides such as carbofuran[2,3-dihydro-2,2-dimethylbenzofuran-7-yl methyl carbamate] as an insecticide, and pyrazolate [4-(2,4-dichlorobenzolyl)-1,3-dimethyl-5-pyrazolyl-1,3-dimethyl-5-pyrazolyl-p-toluensulfonate], pyrazolate+pretilachlor [2-chlor-2,6-diethyl-N-(n-propoxyethyl) acetanilied] as herbicides on change in numbers of soil microorganisms and pH in planted and unplanted flooded rice paddy soils. The results of weekly investigated change of pH and populations of total bacteria, gram negative bacteria, anaerobic bacteria and fungi after treatments of pesticides were as follows : The change of pH in rice-planted soil gradually decreased in a matter of weeks after treatment with pesticide and the pH increased again from the sixth week, but no change of pH could be observed in nonplanted soil. The total numer of bacteria in the treated plots were slightly less than in the control plot, and the numbers decreased with increasing application rates of pesticides. But the microbial population increased in a matter of days after treatment with pesticide. Number of the gram negative bacteria until the sixth week after treatment of pesticide were fewer than control. The number in the carbofuran-treated plot decreased after a weeks after treatment, but numbers in plots treated with pyrazolate and pyrazolate+pretilachlor increased. The number of anaerobic bacteria in the treated plots were few by comparison with the untreated control, but the number increased after a weeks after treatment with pesticides. The populations of fungi in the carbofuran-treated plot were similar by comparison with the untreated control. The populations in the plots treated with pyrazolate and pyrazolate+pretilachlor decreased in 4 to 5 weeks with increase of application rate, but afterwards increased.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.349-353
• /
• 2009

We developed a new barley cultivar "Dami" (Hordeum vulgare L.) with the auricleless gene lig (al, li, aur-a). The characteristic of auricleless is a spontaneous mutant type which has known as a monogenic recessive gene. The plant with the gene has erect leaf blades because of no auricle. The cultivar was derived from a cross between 'BGS60' and 'Kangbori'. 'BGS60' has the auricleless gene (li), while 'Kangbori' showed a high biomass with winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus). Subsequent generations were handled by the bulk method in a pedigree selection program. A promising line showed both high yield and lodging resistance in the yield trials at Iksan in 2003 to 2004, and designated as Iksan414. The line was subsequently evaluated for winter hardiness, earliness, and yield in the seven locations around Korea for three years from 2005 to 2007 and was designated as "Dami" and released. It has the growth habit of III, erect plant type, green leaf and stem similar to the check cultivar 'Sunwoo' Its heading date was April 30, and maturing date May 31 in paddy field conditions, which were similar to those of 'Sunwoo' respectively. The cultivar Dami was 97 cm in culm length, had 643 spikes per $m^2$ and higher leaf dry weight, and better adaptability to dense planting, winter hardiness, and resistance to BaYMV than the check cultivar did. The average forage yield of "Dami" was about 12 ton $ha^{-1}$ in dry matter (33 ton $ha^{-1}$ in fresh matter) in paddy field. "Dami" also showed 7.5% of crude protein content, 28.5% of ADF (Acid Detergent Fiber), 50.1% of NDF (Neutral Detergent Fiber), and 66.4% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley. This cultivar would be suitable for the area where the daily minimum temperature of January is above $-8^{\circ}C$ in Korean peninsula.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.141-170
• /
• 2010

User created content (UCC) is created and shared by common users on line. From the user's perspective, the increase of UCCs has led to an expansion of alternative means of communications, while from the business perspective UCCs have formed an environment in which an abundant amount of new contents can be produced. Despite outward quantitative growth, however, many aspects of UCCs do not meet the expectations of general users in terms of quality, and this can be observed through pirated contents and user-copied contents. The purpose of this research is to investigate effective methods for fostering production of creative user-generated content. This study proposes two core elements, namely, reward and motivation, which are believed to enhance content creativity as well as the mediating factor and users' committement, which will be effective for bridging the increasing motivation and content creativity. Based on this perspective, this research takes an in-depth look at issues related to constructing the dimensions of reward and motivation in UCC services for creative content product, which are identified in three phases. First, three dimensions of rewards have been proposed: task dimension, social dimension, and organizational dimention. The task dimension rewards are related to the inherent characteristics of a task such as writing blog articles and pasting photos. Four concrete ways of providing task-related rewards in UCC environments are suggested in this study, which include skill variety, task significance, task identity, and autonomy. The social dimensioni rewards are related to the connected relationships among users. The organizational dimension consists of monetary payoff and recognition from others. Second, the two types of motivations are suggested to be affected by the diverse rewards schemes: intrinsic motivation and extrinsic motivation. Intrinsic motivation occurs when people create new UCC contents for its' own sake, whereas extrinsic motivation occurs when people create new contents for other purposes such as fame and money. Third, commitments are suggested to work as important mediating variables between motivation and content creativity. We believe commitments are especially important in online environments because they have been found to exert stronger impacts on the Internet users than other relevant factors do. Two types of commitments are suggested in this study: emotional commitment and continuity commitment. Finally, content creativity is proposed as the final dependent variable in this study. We provide a systematic method to measure the creativity of UCC content based on the prior studies in creativity measurement. The method includes expert evaluation of blog pages posted by the Internet users. In order to test the theoretical model of our study, 133 active blog users were recruited to participate in a group discussion as well as a survey. They were asked to fill out a questionnaire on their commitment, motivation and rewards of creating UCC contents. At the same time, their creativity was measured by independent experts using Torrance Tests of Creative Thinking. Finally, two independent users visited the study participants' blog pages and evaluated their content creativity using the Creative Products Semantic Scale. All the data were compiled and analyzed through structural equation modeling. We first conducted a confirmatory factor analysis to validate the measurement model of our research. It was found that measures used in our study satisfied the requirement of reliability, convergent validity as well as discriminant validity. Given the fact that our measurement model is valid and reliable, we proceeded to conduct a structural model analysis. The results indicated that all the variables in our model had higher than necessary explanatory powers in terms of R-square values. The study results identified several important reward shemes. First of all, skill variety, task importance, task identity, and automony were all found to have significant influences on the intrinsic motivation of creating UCC contents. Also, the relationship with other users was found to have strong influences upon both intrinsic and extrinsic motivation. Finally, the opportunity to get recognition for their UCC work was found to have a significant impact on the extrinsic motivation of UCC users. However, different from our expectation, monetary compensation was found not to have a significant impact on the extrinsic motivation. It was also found that commitment was an important mediating factor in UCC environment between motivation and content creativity. A more fully mediating model was found to have the highest explanation power compared to no-mediation or partially mediated models. This paper ends with implications of the study results. First, from the theoretical perspective this study proposes and empirically validates the commitment as an important mediating factor between motivation and content creativity. This result reflects the characteristics of online environment in which the UCC creation activities occur voluntarily. Second, from the practical perspective this study proposes several concrete reward factors that are germane to the UCC environment, and their effectiveness to the content creativity is estimated. In addition to the quantitive results of relative importance of the reward factrs, this study also proposes concrete ways to provide the rewards in the UCC environment based on the FGI data that are collected after our participants finish asnwering survey questions. Finally, from the methodological perspective, this study suggests and implements a way to measure the UCC content creativity independently from the content generators' creativity, which can be used later by future research on UCC creativity. In sum, this study proposes and validates important reward features and their relations to the motivation, commitment, and the content creativity in UCC environment, which is believed to be one of the most important factors for the success of UCC and Web 2.0. As such, this study can provide significant theoretical as well as practical bases for fostering creativity in UCC contents.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.1-10
• /
• 1996

The contents of heavy metals in soil near the Janghang smelter area were observed to understand present status and relationship between their fraction and the absorption by rice. The soil samples were taken from the eight sites of the paddy fields in 1982 and 1990, and analysis on heavy metals including Cd, Zn, Cu and Pb was performed. The results were as follows: Total contents of heavy metals in the samples of 1990 were higher than those of 1982. The order of increasing ratio was Cu > Zn > Pb > Cd and the variation of Cd content by sequential differente extracting was residual > exchangeable > dilute acid-extractable fractions and its increasing range was from 38 to 71% during nine years. The ratio of immobile heavy metals bound within an oxide or silicate matrix of Fe-Mn oxide bound and residual in surface soil was that Cd, Pb, Cu and Zn were 31.65, 42.22, 76.57 and 79.49%, respectively, and their mobile ratios of exchangeable, dilute acid-extractable and organically bound were more than 20.28%. Those of mobile Cd, Pb, Cu and Zn were 68.35, 55.78, 23.43 and 20.28%, respectively. Correlation between the heavy metal contents in surface soil and those in tissue of rice plant, such as leaf blade, leaf sheath, stem and panicle axis, were significant, but were not significant in subsurface soil. The dilute acid-extractable and organically bound fractions of Cd, Cu, Pb and Zn in surface soil were more significantly correlated with those in tissues of paddy rice.

• Tuberculosis and Respiratory Diseases
• /
• v.73 no.5
• /
• pp.266-272
• /
• 2012

Background: Limited data on the incidence and clinical characteristics of adult pertussis infections are available in Korea. Methods: Thirty-one hospitals and the Korean Centers for Disease Control and Prevention collaborated to investigate the incidence and clinical characteristics of pertussis infections among adults with a bothersome cough in non-outbreak, ordinary outpatient settings. Nasopharyngeal aspirates or nasopharyngeal swabs were collected for polymerase chain reaction (PCR) and culture tests. Results: The study enrolled 934 patients between September 2009 and April 2011. Five patients were diagnosed as confirmed cases, satisfying both clinical and laboratory criteria (five positive PCR and one concurrent positive culture). Among 607 patients with cough duration of at least 2 weeks, 504 satisfied the clinical criteria of the US Centers for Disease Control and Prevention (i.e., probable case). The clinical pertussis cases (i.e., both probable and confirmed cases) had a wide age distribution ($45.7{\pm}15.5$ years) and cough duration (median, 30 days; interquartile range, 18.0~50.0 days). In addition, sputum, rhinorrhea, and myalgia were less common and dyspnea was more common in the clinical cases, compared to the others (p=0.037, p=0.006, p=0.005, and p=0.030, respectively). Conclusion: The positive rate of pertussis infection may be low in non-outbreak, ordinary clinical settings if a PCR-based method is used. However, further prospective, well-designed, multicenter studies are needed.