• Korean Journal of Rural Living Science
• /
• v.8 no.1
• /
• pp.7-13
• /
• 1997

In this study we examined the greenhouse worker's work load to test the efficiency of the developed vehicles (hand operated vehicle (HV), simple battery-powered autonomous vehicle (AV)). The subject of this study were healthy adult females who had experience in growing crops. We measured workers' heart rate, blood Pressure. rectal temperature, mean skin temperature, oxygen consumption and blood lactate level as a physiological index of work load. The results of this study are as follows : The test group using experimental vehicle showed the lower heart rate (mean$\pm$S.D. for HV, AV respectively 74$\pm$5, 75$\pm$3 beats/min, p＜0.01) than the control group (84$\pm$8beat/min) not using experimental vehicle and the lower systolic blood Pressure (HV, AV respectively 109$\pm$8, 109$\pm$9 mmHg, p＜0.01) than the control group (121$\pm$11 mmHg), and lower rectal temperature(HV, AV respectively 37.0$\pm$0.1, 36.8$\pm$0.2$^{\circ}C$, p＜0.01) than the control group (37.0$\pm$0.2$^{\circ}C$), and the less oxygen consumption (HV, AV respectively 2.13$\pm$0.09, 1.66$\pm$0.52$m\ell$/kg/min, p＜0.01) than the control group(2.43$\pm$0.12$m\ell$/kg/min), and the lower blood lactate level (HV, AV respectively 2.03$\pm$1.00, 1.66$\pm$0.52mmol, p＜0.01) than the control group (2.43$\pm$0.12mmol). Judging from these results, these experimental vehicles for greenhouse workers can be confirmed as a useful tool. It is suggested that these vehicles would alleviate the peasant's syndrome including muscle fatigue and musculoskeletal disease usually caused by working in an uncomfortable posture.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

After selecting five types of adhesive epoxy resin for metallic cultural assets such as $Araldite^{(R)}$ rapid type, $Devcon^{(R)}$, $Araldite^{(R)}$ SV427+HV427, $CDK^{(R)}$520, $Araldite^{(R)}$ AW106+HV953 which had already been studied, this paper approached more closely the problem of yellowing and the signal of aging with time passing by connecting the problems with the safety of metallic cultural assets. The change of physical properties according to the change of state of epoxy adhesives was investigated through the change of flexural strength and the change of surface hardness by artificially providing the possible environmental change factors such as ultra-violet ray, and acid base, and how the epoxy chemically changes in its ingredients by the environment was analyzed through FT-IR. As a result of the experiment, for the most part of adhesives brought about the physical change of flexural strength, the change of surface hardness, and the chemical change of chemical ingredients as the product of alcohol, which were respectively different according to the time of ultraviolet irradiation, and acid base change. Under most of the conditions, SV427+HV427 and $CDK^{(R)}$520 were fairly stabilized under each condition of weatherability, but it seems that they should be refrained from being applied in case that the area to restore is thin and wide because the degree of flexural strength of themselves is low. Also, it is found that the preservation environment is very important not only for artifacts but also for the preservation of resins sused for preservation treatment.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.309-316
• /
• 2019

Cropland is a major source of atmospheric nitrous oxide (N₂O) and we need technologies in the field of agriculture that can reduce the presence of N₂O. In this study, a field experiment encompassing six treatments was conducted to determine the efflux of N₂O in cropland during the growing season. An experimental plot was composed of two main sectors, no-tillage (NT) and conventional tillage (CT), which were subdivided into three plots according to types of nitrogen (N) sources: CF, chemical fertilizer; HV, hairy vetch+chemical fertilizer; and RY, rye+chemical fertilizer. The cumulative N₂O emissions were 179.8 mg N₂O m^-2 for CF-CT, 108.1 mg N₂O m^-2 for HV-CT, 303.5 mg N₂O m^-2 for RY-CT, 86.7 mg N₂O m^-2 for CF-NT, 73.8 mg N₂O m^-2 for HV-NT, and 122.7 mg N₂O m^-2 for RY-NT during the fallow season. The CT, HV, and RY of no-tilled soils were reduced by 51.8, 31.7 and 59.6%, respectively (p<0.001). Our results indicate that the use of no-tillage and hairy vetch practice rather than conventional tillage and chemical fertilizer practice can decrease N₂O emission.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.737-743
• /
• 2014

This experiment was conducted to compare heterogeneity for the variance in dairy cattle population and to induce homogeneity of variance using 502,228 performance test records of dairy cattle. The estimates of heritability for milk yields, fat yields and protein yields were 0.28, 0.26 and 0.24, respectively and the estimate of average breeding value by birth year was lower in HV (heterogenous variance) model than in animal model, collectively. The average breeding values of milk yields, fat yields and protein yields for 545 sire bulls applicable to the criteria of interbull MACE programme were 453.54kg, 10.75kg and 14.33kg, respectively and when the heterogeneity was adjusted they were 432.06kg, 10.15kg and 13.40kg, respectively, which were lower in all milk traits collectively. In animal model, coefficients of phenotypic correlation between dataset I and II were 0.839 in milk yields, 0.821 in fat yields, and 0.837 in protein yields, while in HV model, they were 0.841 in milk yields, 0.820 in fat yields, and 0.836 in protein yields, showing similar results in 2 models. When compared using animal model and HV model, the regression coefficient for ratio of number of daughters by calving year of milk yields increased from 15.157 to 16.105 and that of fat yields increased from =0.227 to =0.196, but that of protein yields decreased from 0.630 to 0.586.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.433-442
• /
• 2018

In this study, metal properties were compared by preparingthree iron knives from steel ingots produced via traditional iron-making, and ingot which jointed the steel of modern times. Metal microscope and SEM-EDS analysis revealed fine ferrite and pearlite structures of the hypo-eutectoid steel of Fe-C alloys. All samples also exhibited martensite on the blade of the knife. By Vicker's hardness analysis, the hardness of the sand iron knife (K1) was 533.38 HV, sand iron-nickel steel knife (K3) was 514.8 HV, and sand iron-carbon steel knife (K2) was 477.02 HV. The mass reduction due to wear was 0.058% for K1, 0.059% for K3, and 0.144% for K2. EPMA(Electron probe micro-analyzer) analysis of the surface pattern of the specimens confirmed that the patterns were exposed due to differences in the content of C or the chemical composition. Additional research on heat treatment processes is needed to increase the abrasion resistance of blades. Traditional steel ingots could produce high-quality steel if combined with nickel steel.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.126-135
• /
• 2015

The purpose of this study was to evaluate the skeletal and dentoalveolar effects of facemask therapy and to compare the anchorage of a bonded expander in patients with Class III malocclusion and different vertical skeletal patterns. Twenty subjects with Class III malocclusion were included in this study and were treated with a facemask and bonded expander. Based on the FMA, subjects were divided into two groups of 10 patients each: a high vertical group (HV; mean FMA $33.56^{\circ}$) and an average vertical group (AV; mean FMA $24.88^{\circ}$). Lateral cephalograms were taken and evaluated before and after treatment. In both groups, forward movement of the maxilla and backward rotation of the mandible were observed after treatment, with no statistical differences between the groups. Vertical skeletal variables increased in both groups, but the increase of FMA was significantly larger in the HV group than the AV group. Mesial movement of maxillary molars and proclination of maxillary incisors which indicate anchorage loss of bonded expander were observed in both groups, with no significant differences between the groups. In conclusion, facemask therapy resulted in effective maxillary protraction in both HV and AV groups. However, the open bite tendency was increased more in the HV group.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.185-195
• /
• 2011

In this study, titanium abutments and zirconia abutments were connected to each implant in external type implants. After that they were loaded 10000 times with 20Kg as occlusal force. The surface changes of external hexgon part and platform were observed in FESEM image. Viker's hardness of an implant, a titanium abutment and a zirconia abutment were measured respectively. 1. Viker's hardness of an implants, a titanium abutment and a zirconia abutment was $309.80{\pm}11.78$ HV, $318.40{\pm}11.82$ HV, and $1495.30{\pm}16.21$ HV respectively. There was no statistical significance between an implant and a titanium abutment (P>0.05, Anova). However, there was statistical significance between an implant and a zirconia abutment(P<0.05, Anova). 2. The wear was observed at the joint of implant and abutment in both a titanium abutment group and a zirconia abutment group after loading 10,000 times. The zirconia abutment showed more remarkable wear than the titanium one. In conclusion, the wear of external hexagon and platform was much more notable in a zirconia abutment group than a titanium one. It was suggested that it could result from the difference of surface hardness between titanium and zirconia. The wear of junction between an implant and a zirconia abutment becomes more severe, the connection of an implant and an abutment is much more unfit. This is likely to cause loosening and fracture of the abutment screw. so it is considered that the possibility of implant supra-structure failure can be increased.

• Korean Journal of Organic Agriculture
• /
• v.30 no.2
• /
• pp.279-290
• /
• 2022

This study was conducted to find out that winter green manure crops could be efficient replacements of expeller cake fertilizers, which were mostly imported, on environment-friendly red pepper production. Four treatments were compared under the condition of plastic film house: 1) barley (B); 2) hairy vetch (HV); 3) mixtures of barley and hairy vetch (B/HV); 4) expeller cake (EC). Total nitrogen content in hariy vetch was 3.6%, which was higher than 1.5~1.8% in barley and mixtures of barley and hairy vetch. P₂O₅ and K₂O contents were similar in all green manures. Supplying amount of nitrogen from B, HV and B/HV plot, which were 172 kg ha^-1, 193 kg ha^-1, and 198 kg ha^-1, were higher than amount of basal nitrogen required by soil testing but were lower than that of total nitrogen, respectively. Among the green manure crops, C/N ratio of HV was the lowest at 11.8, showing a similar value to that of expeller cake, but that of B was the highest at 30.6. Total yield was no significant difference in all treatment plots although B/HV plot showed the highest yield, but initial yield in B plot with high C/N ratio was lower than that in EC plot.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.27-35
• /
• 2023

Purpose: Hallux valgus (HV) is one of the most common chronic foot disorders, occurring when the first toe deviates laterally toward the other toe. HV impairs muscle strength and affects gait function (postural sway and gait speed). Thus, this study aims to investigate using the FDM system the effect of wearing braces on gait while wearing a virtual reality (VR) device. Methods: This study was conducted on 28 healthy adults with HV of 15 degrees or more. To compare differences in walking, depending on whether a toe brace can be worn, the subject walked without wearing anything, walked after wearing the VR device, and walked after wearing the VR device and the toe brace, and the FDM system was used for the gait ability measurement analysis. Results: As a result of a one-way repeated analysis of variance, the walking speed-related variables (cadence, velocity, etc.) in the HV group were higher during comfortable walking. In addition, walking while wearing a VR device and walking while wearing a VR device and a toe brace demonstrated more significant values in terms of six gait parameters (double stance phase, loading response, stage, stage, stage, and stage). The maximum pressure of the forefoot was significantly reduced when walking while wearing a VR device and a toe brace compared to comfortable walking, but in all variables, there was no statistically significant difference between walking while wearing a VR device and walking while wearing a VR device and a toe brace. Conclusion: Orthosis with a VR device during gait (OVG) and gait with a VR device (GVR) affect gait in HV patients. However, there was no significant difference between GVR and OVG. Thus, it is necessary to conduct experiments on various HV angles and increase the duration of wearing the toe brace.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.877-879
• /
• 2002

본 논문에서는 HVS을 이용한 웨이브렛 패킷 기반 이미지 워터마킹 기법을 제안한다. 이미지를 주파수/공간 도메인 상에서 세부적으로 분해하기 위해 웨이브렛 패킷 분해방법을 선택했고 워터마크 삽입 후 사람 눈에 안보일 수 있도록 MTF를 참고하여 워터마크를 삽입하였다. 모든 서브 밴드에 랜덤 가우시안 백터에 의해 생성된 1000개의 워터마크를 골고루 삽입함으로써 견고성측면을 강화하였다. 실험 결과는 이런 비가시성과 가우시안 노이즈나 JPEG, 잘라내기등 여러 공격모델에 대해 견고성을 잘 보여주고 있다.