• Title/Summary/Keyword: Hunting

Search Result 302, Processing Time 0.021 seconds

The Development of Hunting Culture and The Hunting Science (사냥 문화의 발달과 사냥학)

  • Chang, Tae-Hyun;Lee, Chan-Yong
    • Journal of Forest and Environmental Science
    • /
    • v.13 no.1
    • /
    • pp.57-65
    • /
    • 1997
  • The culture of hunting is the culture of mankind and the hunting is also the mainspring of development of human culture. In our country the demand of hunting is increasing with the development of economy in 1980's. But we have no traditional hunting culture, so that the recent problem of hunting was caused and will be caused. So it is necessary that we have to establish the new culture of hunting and when we understand more exactly the concept of hunting, we can found the proper hunting culture.

  • PDF

A Study on the Controlling Method of Hunting Inducing Point during Parallel Running of alternator Equipped with converter (컨버터가 내장된 교류발전기 병렬운전중의 헌팅 억제에 관한 연구)

  • 노창주
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.23 no.3
    • /
    • pp.346-351
    • /
    • 1999
  • This paper is a research for removing the hunting which came about during the parallel running of the alternators which four-pole six-phase have the converter with twelve diodes to rectify all the waves. Druing the parallel running the hunting came about under the period of 0.2-0.3{sec} not when it's load was the resistance but the capacity at the rpm band 1575[rpm] 1690[rpm] This hunting in our judgement was not come about from the general hunting causes which have been already known to but the special example. And so we checked that the hunting came about or not as per the changes of the rpm exciting current load current and converter and converter output voltage and the following facts were revealed. -The hunting occured during the constant voltage charging where r. p. m band is from 1575[rpm] to 1690[rpm] - The hunting did not came about during the constant power charging in which there was the large difference between the converter output voltage and the battery voltage. -The hunting did not came about in the low rpm band. We could see from the above facts that the existence of the hunting inducing point at the con-stant voltage charging band was the direct cause of the hunting. After trying every possible means to remove the hunting inducing point we could know that the modification of the synchronous generator is suitable for he purpos in view of the small engine room.

  • PDF

Comparative Analysis of Hunting System in OECD Countries (OECD 국가(國家)들의 수렵제도(狩獵制度) 비교(比較)·분석(分析))

  • Byun, Woo-Hyuk;Yoon, Seong-Il
    • Journal of Korean Society of Forest Science
    • /
    • v.87 no.2
    • /
    • pp.286-299
    • /
    • 1998
  • This study was conducted to do a comparative analysis of hunting system in 16 OECD(Organization for Economic Co-operation and Development) countries. Hunting is one of the most advanced types for developing natural resources, esp. wildlife, which is one of major products from forest. There are two types of hunting system ; Revier and/or License System, around most countries which have traditional advanced hunting and higher hunter population. Licence system, which is chosen in Korea, is less efficient ways of hunting for maximizing economical value and wildlife management than Revier system does. Adopting better system for much more efficient economical condition from hunting in Korea in a future is a ultimate goal in this study. The first step for the goal is an analysis of these two system among 16 OECD countries ; United State, Japan, Germany, France, etc. Comparative researches in hunting regulations such as number of hunters, hunter ratio to population, hunting bags, game species, seasons, ammunition and hunting permit are a next step for adopting developed hunting system in Korea. Korea has a smallest hunter ratio to population (1/2,463) among 16 OECD centuries and economical value lead by hunting is estimated still very low. Revier system is a popular one in most OECD countries except United State, Japan, etc, which is useful for wildlife management and maximizing economical value of hunting. And usually rifles are permitted for big game hunting. Hunting examination and/or insurance are compulsory for achieving hunting permit. Depend on game species, yearly hunting bag and season are constructed in most OECD countries.

  • PDF

The Bogie Bunting Sensors quality Inspection (고속열차의 대차불안정감지센서 시험에 대한 연구)

  • Cha, Geun-Su;Jeon, Seong-Joon;Shon, Kang-Ho
    • Proceedings of the KSR Conference
    • /
    • 2009.05b
    • /
    • pp.603-612
    • /
    • 2009
  • The bogie hunting sensor detects accelerations of a bogie. It transmits those accelerations using frequency modulated signal to the TCMS(Train Control and Management System) electronics for functional processing. TCMS decide undesirable bogie hunting and high speed instability with frequency modulated signal. The bogie hunting sensor is essential component for safety driving of high speed train. The bogie hunting sensor's quality inspection before sensor is installed on bogie is very important. Therefore it is required equipment for exact inspection of train bogie hunting sensor. This study is about development of Bogie Hunting sensor's inspection equipment that we can improve Bogie Hunting sensor's quality. Accordingly, I suppose that this thesis will be utilized to improve the bogie hunting sensor's quality thru exact inspection.

  • PDF

Solving design optimization problems via hunting search algorithm with Levy flights

  • Dogan, Erkan
    • Structural Engineering and Mechanics
    • /
    • v.52 no.2
    • /
    • pp.351-368
    • /
    • 2014
  • This study presents a hunting search based optimum design algorithm for engineering optimization problems. Hunting search algorithm is an optimum design method inspired by group hunting of animals such as wolves, lions, and dolphins. Each of these hunters employs hunting in a different way. However, they are common in that all of them search for a prey in a group. Hunters encircle the prey and the ring of siege is tightened gradually until it is caught. Hunting search algorithm is employed for the automation of optimum design process, during which the design variables are selected for the minimum objective function value controlled by the design restrictions. Three different examples, namely welded beam, cellular beam and moment resisting steel frame are selected as numerical design problems and solved for the optimum solution. Each example differs in the following ways: Unlike welded beam design problem having continuous design variables, steel frame and cellular beam design problems include discrete design variables. Moreover, while the cellular beam is designed under the provisions of BS 5960, LRFD-AISC (Load and Resistant Factor Design-American Institute of Steel Construction) is considered for the formulation of moment resisting steel frame. Levy Flights is adapted to the simple hunting search algorithm for better search. For comparison, same design examples are also solved by using some other well-known search methods in the literature. Results reveal that hunting search shows good performance in finding optimum solutions for each design problem.

The Numerical Analysis about the Hunting Factors of the Orifice Meter (오리피스 유량계의 헌팅 원인과 영향인자에 관한 해석적 연구)

  • Shin, Chang-Hoon;Ahn, Seung-Hee;Chung, Jong-Tae;Her, Jae-Young;Kim, Woo-Sik
    • 유체기계공업학회:학술대회논문집
    • /
    • 2005.12a
    • /
    • pp.150-157
    • /
    • 2005
  • Generally, the flow hunting is observed in almost all of the orifice meters but the intensity of the flow hunting is different at each metering system. So, we were getting some Questions as follows; why such a difference occurs and whether it influence to metering error rate or not. To investigate the flow hunting characteristics, we are trying to examine the flow characteristics around the orifice meter when the transient flow or pressure is generated at after the PCV(Pressure Control Valve) by 3D CFD method. And we have compared numerical results with experimental results at M - PCV station in order to clarify the relations with both the metering-pipeline diameter and flow rate. Finally, we can show some major factors influencing to the flow hunting and propose some correcting scheme of the flow hunting equation.

  • PDF

A study on select of common Kestrel(Falco tinnunculus) hunting areas in breeding session (번식기 황조롱이(Falco tinnunculus)의 사냥 장소 선택에 관한 연구)

  • Won, Il Jae;Park, Min Cheol;Park, Hyun Doo;Cho, Sam Rae
    • Journal of Wetlands Research
    • /
    • v.18 no.4
    • /
    • pp.350-356
    • /
    • 2016
  • The biggest factor in the success of breeding animals is selection of foods, which is determined by quality and quantity of habitats(Newton, 2003), in the case of This high biomass wetlands as an indicator of ecosystem function about Common Kestrel's choice of hunting area is expected to be an important clue of quality and quantity of habitats. For this study, it is divided into four types(Glasslands, Paddy fields, Dry fields, Rparian land) about Common Kestrel's hunting area in Yugu-eup, Gongju-si, Chungcheongnam-do, Recorded the behavior of Common Kestrel for three years during the breeding season from March to June(2014~2016). Result of investigation, hunting area showed a high hunting behavior in riversides and flight-hunting was frequently investigated from may to June. In addition flight-hunting's main food acquisition is mammal(the vole), while perching behavior's main food acquisition is insect according to the fact flight-hunting were mainly done in riversides, perching behavior were highly investigated than flight-hunting at glasslands and paddy fields and dry field. Hunting spot's coverage rate of plants covering the ground showed differences depending on hunting areas, but height of plants were not significant. Height of the plant according to hunting methods of flight-hunting to catch mammal(vole) was analyzed to prefer lower height than perching behavior Based on these results riversides are considered as a very important environmental factors for Common Kestrel's prey selection in breeding session.

Study on the Structural Analysis and Characterization of Hunting Pit in the Bronze Age - Focusing on Relics in Ulsan and Chuncheon Area - (청동기시대 함정유구의 구조분석과 성격 검토 - 울산, 춘천 지역 유적을 중심으로 -)

  • Choi, Su-hyoung
    • Korean Journal of Heritage: History & Science
    • /
    • v.46 no.2
    • /
    • pp.166-185
    • /
    • 2013
  • After analyzing the location, arrangement, inner structure, and form of the hunting pit in the Bronze Age, this paper sets up three types and talks about types of hunting pits. After analyzing the types of the hunting pit, three types of hunting pits are derived: mountain district - large group's arrangement - long oval - I II type(A), mountain district - arrangement in a line - oval - I type(B), flat area - arrangement in a line - oval - I III type(C). Literature, the ways in hunting pits, the purpose of the installations, and the characters are studied and compared with those of the anthropological cases. Even though hunting pits of types A and B are constructed to hide and get protein and bone of animals for breeding, there are differences in the ways in hunting and characters. Type of A seems to be constructed only for occupation that is the standardized hunting method on a small works. However, type B is the chasing method to hunt as a group and it has various purposes including main occupation. For example, it is for improving the war skills by practicing the hunting strategies and cooperating with the people. In addition, it is for getting a sacrifice for god. The type C hunting pit is estimated that it plays a role to protect themselves from invasion. It's inferred that there are many purposes for military defense and protection of people or animals within the village. It is the reason why the construction is spread in hunting pit including various purposes in the Bronze age that originates in social and economical specialization like the increase in agricultural productivity and appearance of a chief.

Comparative Folklore Study on Gut in West Coast Area case of a mock hunting and animal sacrifice (황해도굿의 비교민속학적고찰 모의사냥과 동물공희를 중심으로)

  • Im, Jang Hyun
    • Korean Journal of Heritage: History & Science
    • /
    • v.42 no.4
    • /
    • pp.132-151
    • /
    • 2009
  • Gut (Shaman ritual) in the west coast area is consisted to sanyang-geori (hunting), tasal-geori, gunwoong-geori those describe from hunting process to preparing animal sacrifices to a deity. The characteristic of gut in the west coast area which are represented for mock hunting and animal sacrifice ritual is practicing at the sibamasturi in Japan. This paper aims to compare a shaman ritual in west coast area in Korea and Japanese Sibamasturi from the comparative folklore point of view. Gut in the west coast area is well known for dividing sacrificial offering: vegetable for sinryeong and meat for singyeong. This division of spiritual deity shows it has different background from agriculture and hunting culture. Hwanghae-do gut has been formed under the various life environments. Therefore, each stage is conducted according to the purpose of the ritual. Sanyang-geori (hunting) represents the scene of hunting in the mountain and by catching live animals and it refers to Gunwoonsin, and will be offered. Animal sacrifice is a positive ritual which get rid of bad luck and pleased deity. Sibamasturi is practiced in mountain area where most of people involve in hunting and agriculture. Therefore, this area has both agricultural ritual and hunting ritual. Sibamasturi is practiced in January (lunar) and it also has meaning of beginning of agriculture and hunting in mountain area. Ground burnt off for cultivation way symbolizesfire ritual and mock hunting as well as animal sacrifice together. These rituals match to farmers of mountain area in the south-east Asia. The gut in the west coast area and Japanese Sibamasturi have common point that mock hunting and animal sacrifice are practiced at both rituals, however, the structure for these two ritual are different. In other word, there animal sacrifice has been formed with different cultural back ground.

A Pipeline Network Analysis on the Source and the Relation with Pipe Diameter of the Flow Hunting in a Orifice Meter (오리피스 유량계의 유동헌팅 원인과 배관경과의 상관관계에 대한 배관망해석 연구)

  • Shin, Chang-Hoon
    • Journal of the Korean Institute of Gas
    • /
    • v.15 no.1
    • /
    • pp.54-59
    • /
    • 2011
  • Generally, the flow hunting is observed in almost all of the orifice meters but the intensity of the flow hunting is different at each metering system. In order to investigate the relations between pipe diameter and the flow instability or the flow hunting in a real metering system, a one-dimensional pipeline network model was built and analyzed for the examination of flow characteristics and relations to the flow hunting, changing diameters of the meter and the pipes before and after the meter. Finally, the effects of pressuredifference variation and flow hunting following to the variations of the diameters of the meter and the pipes before and after the meter were investigated and the relations were examined as well.