• 한국가스학회지
• /
• 제11권2호통권35호
• /
• pp.60-64
• /
• 2007

한국에서는 석유화학 산업의 역사가 30년 이상이 되어 시설이 노후화되기 시작하여 잠재적인 사고의 위험 가능성이 높아지고 있다. 지금까지의 석유화학 산업에서의 전통적인 위험성 평가와 시스템의 제어는 기계적인 결함에만 중점을 두었기 때문에 인간의 행동을 제어하는 것은 간과하여 왔다. 자동화 기술과 제어기술의 발전도 필요하지만 인간의 의사 결정 요소가 석유화학산업에서 사고를 예방하는데 필수적이다. 거의 모든 심각한 사고는 인간 행동과 안전 장비의 기계적인 결함이 동시에 부적당할 때 발생한다. 진보적인 인간의 신뢰성 분석 소프트웨어는 실패 데이터를 수집하고, 한국의 화학 산업에서 인간의 오류 확률을 분석하기 위해 개발되었다. 이 논문에서는 Root cause Analysis를 통한 결과와 PIF(Performance Influencing Factor) 평가 결과를 보여준다.

• 산경연구논집
• /
• 제10권5호
• /
• pp.77-86
• /
• 2019

Purpose - The present study examined the reliability of accounting information based on the pay slice (CPS) information of chief executive officers (CEOs) in the service industry. The difference in the size of CPS under the capitalist system can be used as an index to gauge the influence of top management. Research design, data, and methodology - In accordance with the amendment of the Financial Investment Services and Capital Market Act in 2013, the pay information of individual registered executives with annual salary of more than 500 million won has been disclosed. The sample of the current study is 232 companies listed on the Korea Exchange excluding financial services from 2013 to 2015, when the individual pay-slice information for registration officers was published in the business report in accordance with the revision of the Capital Market Act. The financial data required for this study were extracted from the FnGuide and the TS-2000. With the data, we tested the relationship between CPS and accounting information reliability through a linear regression analysis. Results - The first result showed that the relationship between the CPS and human resource in internal accounting control system in the service industry is significantly negative only with the accounting department personnel. This result implied that the CEO can negatively affect the retention of the accounting department in the firm. Second, both the CPS and quality of audit in the service industry are negatively related both to audit fees and to audit time. Nonetheless, the relationship between the number of the auditor and the CPS is insignificant. This result indicated that the CEO can negatively affect audit fees and audit time of external auditors. The results of the present study suggested that CPS information may have a negative impact on the reliability of accounting information. Conclusion - This study is the first study to examine the reliability of CPS and accounting information for the service industry in terms of human resources in internal accounting control system and audit quality. Therefore, the present study is expected to provide some useful information to economic decision-making of various external parties for service firms.

• 대한한의학회지
• /
• 제38권1호
• /
• pp.56-71
• /
• 2017

Objectives: The purpose of this study was to review the article using an IMU(Inertial Measurement Unit) for measuring the cervical range of motion and to evaluate the feasibility of using an IMU for measuring the cervical range of motion. Method: Scopus was used to search for the articles relating to the inclusion criteria. Which is measuring the cervical range of motion using an IMU. A total of 15 articles were selected through discussion. Degree and the reliability of the cervical range of motion and the validity of the data within the articles were extracted. Results: The measurement of the cervical range of motion using an IMU were $92.25^{\circ}$ to $138.2^{\circ}$, $122.4^{\circ}$ to $154.9^{\circ}$, $73.75^{\circ}$ to $93.1^{\circ}$ on the sagittal plane, transverse plane, and coronal plane respectively. 38 of the 43 values showed good reliability. They were larger than 0.75. 5 of the 43 values showed reliability less than 0.75. They were measured by smart phone. 16 of the 21 values showed good validity. The remaining 5 were measured by smart phone. The lower reliability and validity of smart phone were related to the protocol. The IMU can measure the coupling motion and may be used in various situations. Conclusion: The IMU may become a gold standard for measuring the cervical range of motion. The IMU measured not only the cervical range of motion but also the coupling motion. Furthermore, IMU may be used in various situations. Therefore, IMU must be considered a valuable measurement device.

• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.17-25
• /
• 2005

본 논문은 PCB 생산 자동화를 위한 데이터 변환 시스템을 구현한다. CAD로 설계한 데이터는 PCB 생산라인과의 데이터 호환을 이루지 못하기 때문에 데이터 호환을 갖는 자동화 시스템이 필요하다. 본 논문에서는 PCB 생산 자동화를 위한 PCB 부품 정보를 분석하고 IC 부품 정보를 DB로 구축한다. CAD 설계자의 Human error 검출 알고리즘을 개발하고, PCB 생산 라인에 적합한 데이터로 변환하는 알고리즘을 개발한다. PCB 생산라인의 부품의 정보 추가, 수정하기 위한 데이터 변환 인터페이스를 설계 및 구현한다. 기존의 수작업 공정을 자동화함으로서 처리속도를 대폭 개선하였으며, 신뢰성 있는 칙적화된 데이터로 PCB 생산 자동화에 일조를 할 수 있다.

• 한국컴퓨터정보학회논문지
• /
• 제11권6호
• /
• pp.261-267
• /
• 2006

원자력발전소의 정량적 위험성 평가를 위해서 확률론적 안정성 평가 기법이 이용되고 있는데, 이를 위해서는 여러 가지 분야의 다양한 신뢰도 데이터가 필요하다. 이러한 신뢰도 자료 중에 인간의 지각 행위 및 수행 행위로부터 발생하는 인적 오류 확률은 그 특성상 실제 오류 확률을 얻기가 매우 어렵다. 따라서 인적 오류 확률을 구하기 위해서는 인간 신뢰도 분석 분야의 전문가들이 제안한 인간 신뢰도 분석 방법을 이용하여 인적 오류 확률을 추정한다. 한국 원자력 연구소에서는 이를 위해 인간의 지각 및 수행 행위에서 야기되는 인간 오류 사건을 관리하고 인적 오류 확률을 추정하기 위한 인간 신뢰도 분석 시스템을 개발하고 있다. 본 연구에서는 인간 신뢰도 분석 방법론 개발 및 이를 이용한 인간 신뢰도 분석 전산 지원 시스템의 개발 과정에 관하여 기술하였다.

• 산업경영시스템학회지
• /
• 제23권54호
• /
• pp.145-153
• /
• 2000

The importance of reliability information management for an effective product quality management has been increased. Reliability management requires many different kinds of human and technical expertise and cost over the various discipline in the organization. However, it is difficult task to set up appropriate and effective life data analysis because of lacking engineers with reliability knowledge, statistical background and of funds in small and medium-sized enterprise. It is needed to develop a low cost implementation architecture of reliability information supporting system for small and medium-sized enterprise under web environment. In this paper, research efforts are presented to solve such problems of small and medium-sized enterprise under web environment.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.109-119
• /
• 2013

This paper presents the design of the Safety Programmable Logic Controller (SPLC) used in the Nuclear Power Plants, an analysis of a reliability for the SPLC using a markov model. The architecture of the SPLC is designed to have the multiple modular redundancy composed of the Dual Modular Redundancy(DMR) and the Triple Modular Redundancy(TMR). The operating system of the SPLC is designed to have the non-preemptive state based scheduler and the supervisory task managing the sequential scheduling, timing of tasks, diagnostic and security. The data communication of the SPLC is designed to have the deterministic state based protocol, and is designed to satisfy the effective transmission capacity of 20Mbps. Using Markov model, the reliability of SPLC is analyzed, and assessed. To have the reasonable reliability such as the mean time to failure (MTTF) more than 10,000 hours, the failure rate of each SPLC module should be less than $2{\times}10^{-5}$/hour. When the fault coverage factor (FCF) is increased by 0.1, the MTTF is improved by about 4 months, thus to enhance the MTTF effectively, it is needed that the diagnostic ability of each SPLC module should be strengthened. Also as the result of comparison the SPLC and the existing safety grade PLCs, the reliability and MTTF of SPLC is up to 1.6-times and up to 22,000 hours better than the existing PLCs.

• 대한간호학회지
• /
• 제41권1호
• /
• pp.129-140
• /
• 2011

Purpose: This study was done to develop an instrument for measuring intellectual capital and assess its validity and reliability in identifying the components, human capital, structure capital and customer capital of intellectual capital in hospital nursing organizations. Methods: The participants were 950 regular clinical nurses who had worked for over 13 months in 7 medical hospitals including 4 national university hospitals and 3 private university hospitals. The data were collected through a questionnaire survey done from July 2 to August 25, 2009. Data from 906 nurses were used for the final analysis. Data were analyzed using descriptive statistics, Cronbach's alpha coefficients, item analysis, factor analysis (principal component analysis, Varimax rotation) with the SPSS $PC^+$ 17.0 for Windows program. Results: Developing the instrument for measuring intellectual capital in hospital nursing organizations involved a literature review, development of preliminary items, and verification of validity and reliability. The final instrument was in a self-report form on a 5-point Likert scale. There were 29 items on human capital (5 domains), 21 items on customer capital (4 domains), 26 items on structure capital (4 domains). Conclusion: The results of this study may be useful to assess the levels of intellectual capital of hospital nursing organizations.

• 한국의류학회지
• /
• 제28권2호
• /
• pp.344-353
• /
• 2004

The purpose of this study was to offer the basis contributes to extract the standardized body data from 3D body measuring for women aged 60 and older. The WB4 of Cyberware was used, and the measuring program of 3D scanning data was 3DM. This study was focused to verify the reliability of 3D data and to offer the effective utilization of 3D measuring on the research for elderly women■s body. Subjects were 19 women aged 60 and older. And three women in late twenties and three dressforms for women were comparing subjects to analyze the signiscant difference by age or human body variable making error. First, 3D scanning was executed twice on each subject, but any significant difference was not appear between two scanning data. So we certifed we could get the consistent and reliable data from the 3D scanner used in this study. Second, the reliability of 3D measuring data was analyzed, and the error range which meant the difference between 3D data and traditional measuring data was analyzed. In elderly women, the significant difference between two data was appeared in 19 body parts. The 7 of 19 were concerned with armpit point. In young women, three significant difference were appeared, and in dressforms, any significant difference was not certified. From these results, we could certify that age or human body variable produced the difference between two data. Third, the data of elderly women from three measuring methods, 3D measuring, traditional measuring, and measuring on 2D photographs were compared. From the result, we found that the 3D measuring data was quite reliable for most body parts excluding some width parts. But in elderly women, there were some limitation to extract reliable data because of their unique body characteristics. In order to be a role of the effective measuring method, the 3D measuring protocol reflected the body characteristics of each age or gender had to be prepared.

• 디지털산업정보학회논문지
• /
• 제14권1호
• /
• pp.87-101
• /
• 2018

The purpose of this study is to develop the measuring instruments for evaluation criteria for Malcolm Baldrige National Quality Award(MBNQA), suitable for ICT Industries, and to analyze the cause-effect relationship between those criteria through aforementioned instruments. MBNQA is formed with seven categories: Leadership, Strategic planning, Focus on patients, other customers and markets, Measurement, analysis and knowledge management, Human resource focus, Process management and Results. As excluding the Human Resource Focus category, this study empirically examined the cause-effect relationship among six categories. In order to empirically examine the research model, this study calculated Cronbach's alpha and reliability index, thus examined the reliability and executed Exploratory Factor Analysis. Furthermore, Average Variance Extracted(AVE) is used to verify the discriminant validity. Lastly, the hypothesis testing was made complete through significance test on the paths between variables. The result of this study shows that both leadership and social responsibility have direct cause-effect relationship with Measurement, analysis and knowledge management, Human resource focus, Process management and also that this relationship has direct impact on Human resource focus, Measurement, analysis and knowledge management as well, consequently exerting influence on the result through Process management, Finance and Market data.