• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.10a
• /
• pp.13-18
• /
• 2004

In this study, a new method is proposed generating 3D wire-frames of building using the lowest level topology, points, which are input by human operators. Through the procedure, it is possible to make prediction occlusion points and generate the topology automatically among points, lines, surfaces from buildings. In order to adjust the error of initial values which are input manually, the least squares adjustment for model-image fitting is carried out using the edge information of aerial imagery. And also, model fitting procedure is done making all surfaces plane of buildings by the least squares adjustment. As a result of those procedure, 3D building models are refined similar to real figures of buildings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.349-361
• /
• 2008

The purpose of this study was to develop bodice basic patterns fitted on different body types of adult women. To meet this purpose, first, human bodies were measured using tight fitting technique and classified based on the shapes of upper trunk. The subjects were 214 women $20{\sim}39$ years of age. For the measurement of female upper trunk, tight fitting technique was utilized. The development of figures of upper trunks were obtained from women. These development of figures were then digitized and analysed using the PAD system. A total of 155 measurements were taken from each of the development of figures. then, 32 measurements were selected for the further analysis. As complimentary data, 22 direct body measurements using an anthropometric method and 23 body measurements using a photographic method from the side view pictures of the participants were also obtained. The results and discussions of this study are as follows: Using the body measurements from the development of figures, a factor analysis and a cluster analysis were conducted. As a result, the body types were classified into 5 different types, which differ in terms of bust volumes, shoulder slopes, shoulder tilts, back silhouettes, body axises. The prominent characteristics of each type are as follows: The first type has a large bust volume. The second type has a right figure. The third type has a rounded back silhouette. The fourth type has a back silhouette of scapular coming backward. Finally the fifth type has a shoulder tilted forward.

• The Journal of the Korea Contents Association
• /
• v.2 no.3
• /
• pp.1-15
• /
• 2002

A noel automated brain region extraction method in single channel MR images for visualization and analysis of a human brain is presented. The method generates a volume of brain masks by automatic thresholding using a dual curve fitting technique and by 3D morphological operations. The dual curve fitting can reduce an error in clue fitting to the histogram of MR images. The 3D morphological operations, including erosion, labeling of connected-components, max-feature operation, and dilation, are applied to the cubic volume of masks reconstructed from the thresholded Drain masks. This method can automatically extract a brain region in any displayed type of sequences, including extreme slices, of SPGR, T1-, T2-, and PD-weighted MR image data sets which are not required to contain the entire brain. In the experiments, the algorithm was applied to 20 sets of MR images and showed over 0.97 of similarity index in comparison with manual drawing.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.19-27
• /
• 2010

This paper proposes a method for enhancing detection performance and reducing computational cost when detecting a human face by applying B-spline active contour to the frame difference of consecutive images. Firstly, the method estimates amount of user's motion using kurtosis. If the kurtosis is smaller than a pre-defined threshold, it is considered that the amount of user's motion is insufficient and thus the contour fitting is not applied. Otherwise, the contour fitting is applied by exploiting the fact that the amount of motion is sufficient. Secondly, for the contour fitting, difference edges are detected by combining the distance transformation of the binarized frame difference and the edges of current frame. Lastly, the face is located by assigning the contour fitting process to the detected difference edges. Kurtosis-based motion amount estimation can reduce a computational cost and stabilize the results of the contour fitting. In addition, distance transformation-based difference edge detection can enhance the problems of contour lag and discontinuous difference edges. Experimental results confirm that the proposed method can reduce the face localization error caused by the contour lag and discontinuity of edges, and decrease the computational cost by omitting approximately 39% of the contour fitting.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.173-180
• /
• 2000

To determine the effect of base curve and diameter of soft contact lenses on the fitting under the various corneal curvature, the model eyes which was made of either stainless steel or ordinary wood, were used as the substitutes for human eyes. The evaluations of fit of the soft contact lenses on both wood model eyes and human eyes were found to be very similar to each other. All the contact lenses except very thin ones became flat after fit on the stainless steel model eyes because the model eye could not preserve enough moisture to hold the edge of contact lenses on the steel ball's surface. The relationships between the base curves of contact lenses and radii of cornea for the optimum (normal) fit were measured as follows : corneal curvature (C.C)<7.6 mm : base curve(B.C) 8.4 mm, C.C 7.6~7.8 mm : B.C 8.4~8.5 mm. C.C 7.8~8.1 mm : B.C 8.6 mm. It is concluded that larger base curve is required for the eyes which have abnormal bulge on its cornea. It is found that very thin soft contact lenses can be easily twisted or folded regardless of moisture content when they were fit on the relatively dry eyes(corneas).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.98-107
• /
• 2016

The purpose of this study is for Human error prevention to acquire Collision Risk Perception Index (CRPI) sensed by the Officer Of the Watch (OOW) when the approaching distances are reduced in six types of ship encountering situations (Head on, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$, Overtaking, Overtaken) between own ship and a target ship and then to predict CRPI fitting coefficients with polynomials in the curve-fitting process. CRPI acquisition experiments are carried out on two coast-guard ships and with the total of 30 crew members. Analysing results shows that CRPI data have goodness of fit to the six types of encountering situation. Futhermore, the One-Way ANOVA results show that CRPI has a negative affect to the OOW's age, career and license grade as the approaching distances is reduced. The availability of CRPI curve fitting with 3 degrees of polynomial was testified through the RMSE as 1.19 to Head on, 0.87 to $045^{\circ}$, 0.81 to $090^{\circ}$, 0.71 to $135^{\circ}$, 1.29 to Overtaking and 0.87 to Overtaken.

• The Research Journal of the Costume Culture
• /
• v.9 no.2
• /
• pp.175-187
• /
• 2001

The purpose of this study is to recognize the real situation of clothing construction to present the desirable direction to establish more scientific and reasonable themes of the study by analysis of the tendency of the clothing construction study. For this purpose, 402 papers on the theme of clothing construction study were excepted from the first issues to the issues of December in 1999 of Journal of Korea Society of Clothing and Textile, Journal of Korea Home Economics, Journal of the Korean Society of Costume, Research Journal of the Costume Culture, Journal of the Korean Fiber Society, and Journal of the Human Engineering Society of Korea. I analyzed and classified the theme into eight issues of design related clothing construction, study of body types, study of patterns, size of apparel, fitting of clothing, protective clothing and functional clothing, sewing, and the clothes. The result of the study is follows. 1. The distribution tendency of the clothing construction study by the journal of each society showed that journal of Korean Home Economic is 22.9%, Journal of Korea Society of Clothing and Textiles 17.3%, Research Journal of the Costume Culture 12.2%, and Journal of the Korean Society of Costume 6.2%. 2. The distribution tendency of the studying issues showed hat study of body types of 29.4%, study of patterns21.9%, fitting of clothing 11.7%, sewing 10.2%, size of apparel 8.5%, and others 7%, protective clothing and functional clothing 6.7%, and design related clothing construction 4.7%. Considering the above result. we can understand that study of body types and patterns are being studied most actively. 3. Regarding the study tendency by academic issues showed that study of construction elements and design application is chiefly centered of the study of design related clothing construction (35.5%), analysis of body types is centered of the study of body, type(46/6%), CAD is centered of the study of patterns (31.1%), and size spec for the ready made patterns is centered of the study of size of apparel(32.4%). As for fitting of clothing, the study was performed in two ways on the changes of he surfaces of human bodies in motion and the functional features of experimental dressing. Regarding the study of sewing study of fusible interlining was mainly performed (36.6%) and regarding the study of protective clothing and functional clothing, study of brassieres and underwear was chiefly performed.

• Journal of Korean Medical classics
• /
• v.24 no.6
• /
• pp.39-47
• /
• 2011

The study is a new way of treating and preventing various diseases and promoting health by means of music specially picked and designed to produce Qi fitting to an individual person in the areas of the structure of human body, physiological function, pathological change, diagnosis and treatment. Oriental medicine music therapy is based on the concept and methodology of the Oriental Medicine, actually meaning the Oriental Medicine, that is specialized in controlling the human biological energy, the Qi, and in coordinating human body and mind which are easy to be unbalanced. The seven emotions affect the change of Qi. The weakness and strength of seven emotions can induce constraint of Qi, the seven emotions music therapy and relieving constraint music therapy can be used in this case.

• Journal of Biomedical Engineering Research
• /
• v.18 no.1
• /
• pp.65-70
• /
• 1997

A human version of Korean total artificial heart(TAM) was designed basso on the magnetic resonance imaging(MRI) data To obtain accurate measurement or human thoracic structure including the valvular sited we analyzed the dimensions of the natural heart of healthy persons and cardiomyopathy(CM) patients. The MRI findings were analyzed to measure the volume of the thoracic cavity that would be occupied by the TAM. The design upgrade of the mechanical performed was also performed with the computer aided design(CAD) system to develop a new version of Korean TAH.