• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 한국생활과학회지
• /
• 제17권1호
• /
• pp.115-126
• /
• 2008

The construction of an athlete's tight-fitting garments is very important to the wearer in terms of athletic performance. Therefore pattern development of tight-fitting garments must allow for the full range of human movement and postures. In this study the relationship between the construction of a skate pants pattern and clothing fitting was explored with the aim of improving the comfort of the clothing. The four male subjects were university students between the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on four consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Results showed differences in the front-rise length and back-rise length between basic pants(A) and modified pants(B,C,D) were -5.16cm and +5.64cm. Comparing the basic pants pattern(A) with modified pants pattern(B), the latter was superior to basic pants(A) in terms of pressure sensation and closeness of fit, but there was no significant difference. Among the four tight-fitting skate pants, A and B pants were superior to the others in terms of fitting and stability of waist and hip sections. In the case of the skate pants, the number of cutting lines in the pattern had an influence on clothing comfort. A minimum cutting line for tight skate pants was better than a maximum cutting line in terms of clothing comfort.

• 한국병원경영학회지
• /
• 제17권1호
• /
• pp.59-78
• /
• 2012

The purpose of this study is to evaluate on the fitting with human resource practice and strategic on 6 public hospital in the point of resource based view. At the result of this study, public strategy is not much fitted into HRM(human resource management) system, but it shows positive result of the fitting with efficiency strategy and HRM system. These results were associated with the integration of G Medical Center. Generally 6 public hospitals of the HRM system and the strategy had not been linked. They also did not achieve a great outcome. We suggest that the manager in charge of each hospital make strategies of the hospital, and then evaluates about fitting with HRM system. We hope, hereafter, it applied the analysis methods that evaluates it with financing result and individual non-financial result all together.

• 한국생활과학회지
• /
• 제10권1호
• /
• pp.93-100
• /
• 2001

The purpose of this study is to investigate the fitness and its problems related in clothing fitness and to get basic data to develop fit ready-to-wear garment, total 352 subjects were surveyed during the period of November, 1998. The major results of this study were as follows ; 1. Both men and women felt fitter in upper clothes than lower clothes. As compared with women, men became more aware of proper fit except coat. 2. Men had lest fitting problems in blouse and shirts while women in coat. Also, the clothes stated which had most fitting problems were trousers by men and women. 3. A variety of fitting problems in ready-to wear garments were identified including sleeve length, skirt length, and pants length. 4. The most frequent alterations were shortening or lengthen of skirt and pants.

• 한국생활과학회지
• /
• 제15권3호
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.715-725
• /
• 2011

Objective: This study is aimed at developing Articulated Human Models(AHM) using superquadrics to improve the geometric accuracy of the body shape. Background: The previous work presents the AHM with geometrical simplification such as ellipsoids to improve analysis efficiency. However, because of the simplicity, their physical properties such as a center of mass and moment of inertia are computed with errors compared to their actual values. Method: This paper introduces a three steps method to present the AHM with superquadrics. First, a 3D whole body scan data are divided into 17 body segments according to body joints. Second, superquadric fitting is employed to minimize the Euclidean distance between body segments and superquadrics. Finally, Fee-Form Deformation is used to improve accuracy over superquadric fitting. Results: Our computational experiment shows that the superquadric models give better accuracy of dynamic analysis than that of ellipsoid ones. Conclusion: We generate the AHM composed of 17 superquadrics and 16 joints using superquadric fitting. Application: The AHM using superquadrics can be used as the base model for dynamics and ergonomics applications with better accuracy because it presents the human motion effectively.

• 한국의류학회지
• /
• 제31권3호
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.756-765
• /
• 2022

The purchase-related responses of MZ generation consumers may vary depending on the environmental factors of the fitting room. Therefore, this study extracted and systematized fitting room characteristics in the retail fashion environment. In-depth interviews were conducted with a total of 50 informants to collect data on the experience of using the fitting room. Then, a qualitative analysis was performed. First, results confirmed that the environmental factors of the fitting room include physical (spatiality, functionality, comfort, and convenience) and human (interactivity and congestion) aspects. Next, additional analysis was performed on functionality and interactivity to clarify the influence of environmental characteristics of the fitting room. These factors were classified into qualitative categories. The study results confirmed that, in the case of functionality, preferred lighting and mirror factors vary depending on the clothing product type, the place and situation for wearing, and individual characteristics. Furthermore, regarding interactivity, the preference for the presence of sales staff or companions differed according to personal traits and the need for additional information and evaluation. The study provides valuable information for effective fitting room space planning for offline fashion stores to meet the needs of MZ generation consumers.

• 한국생활과학회지
• /
• 제8권1호
• /
• pp.211-217
• /
• 1999

To investigate the fitting and its problems related in clothing fit and to get basic data to develop fitted ready-to-wear garment, total 238 subjects were surveyed during the period of May, 1997 in Taejon. The major results were as follows; 1. The results showed that most subjects had purchased ready-to-wear garments in a department store. 2. The fit of ready-to-wear garments is more suitable in the upper wear such as T-shirts and blouse than in lower wear such as skirts and pants. 3. Fitting problems in ready-to-wear garments were identified, including sleeve length, shoulder area. 4. A variety of fitting problems in ready-to-wear garments were showed waistline, thigh girth, sleeve length. 5. There were significant differences between the demographic variables, i.e. marital status and occupation and clothing problems.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.271-281
• /
• 2010

Brazing fitting which is one of the aircraft hydraulic power system components is widely used for saving weight and achieving higher reliability. Any inherent defects or damage of fitting can cause system failure and/or physical damage of human body due to highly pressurized fluid. Radiographic testing(RT) technique and additional micro-structure investigation on cut-away surfaces have been accomplished to find out some defect-like-inhomogeneity in the fittings. The radiography results showed that some defect-like-inhomogeneity existed inside body. Additional micro-structure investigation on cut-away surface reveals that the inhomogeneity is due to internal voids. In this study, it can be is said that RT technique can be a useful tool for field acceptance test of hydraulic brazing fitting in short time.