• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.70-81
• /
• 2001

This paper presents a 3D face modeling method using a CCD camera and a projector (LCD projector or Slide projector). The camera faces the human face and the projector casts white stripe patterns on the human face. The 3D shape of the face is extracted from spatial and temporal locations of the white stripe patterns on a series of image frames. The proposed method employs region segmentation and multi-beam techniques for efficient 3D modeling of hair region and faster 3D scanning respectively. In the proposed method, each image is segmented into face, hair, and shadow regions, which are independently processed to obtain the optimum results for each region. The multi-beam method， which uses a number of equally spaced stripe patterns, reduces the total number of image frames and consequently the overall data acquisition time. Light beam calibration is adopted for efficient light plane measurement, which is not influenced by the direction (vertical or horizontal) of the stripe patterns. Experimental results show that the proposed method provides a favorable 3D face modeling results, including the hair region.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.719-722
• /
• 2003

This paper describes a novel experiment that measures the skin movement of a hand based on MR (magnetic resonance) images in conjunction with surface modeling techniques. The proposed approach consists of 3 phases: (1) MR scanning of a hand with surface makers, (2) 3D reconstruction from the MR images. and (3) registration of the 3D models. The results of registration are used to trace the skin movement with respect to underlying bone motions by measuring the positions of the surface markers.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.257-266
• /
• 2003

3D Modeling Solution can reduce projecting error and also make possible to design visually, so that it can minimize human resources. On the other hand, it has defects of operating difficulties caused by too much complex function, thus it consequently prevent user from prompt handling. According to this paper, the developed party S/W will help that user can construct the parts easily, can let everybody use 3D modeling solution readily, and make fast development of new product. This software will carry out prompt development of new product and derive satisfaction of customers from high quality. Also, saving time and expense naturally raise competitive power in consequence.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.324-329
• /
• 2009

Hand Motion Modeling and Recognition (HMR) are a fundamental technology in the field of proactive computing for designing a human computer interaction system. In this paper, we present a 3D HMR system including data glove based on 3-axis accelerometer sensor and 3D Hand Modeling. Data glove as a device is capable of transmitting the motion signal to PC through wireless communication. We have implemented a 3D hand model using kinematic chain theory. We finally utilized the rule based algorithm to recognize hand gestures namely, scissor, rock and papers using the 3-D hand model.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.385-391
• /
• 2021

3D modeling of the human body is an integral part of computer graphics. Among them, several studies have been conducted on hair modeling, but there are generally few studies that effectively implement hair and face modeling simultaneously. This study has the originality of providing users with customized face modeling and hair modeling that is different from previous studies. For realistic hair styling, We design and realize hair segmentation using FCN, and we select the most appropriate model through comparing PSPNet, DeepLab V3+, and MobileNet. In this study, we use the open dataset named Figaro1k. Through the analysis of iteration and epoch parameters, we reach the optimized values of them. In addition, we experiment external parameters about the location of the camera, the color of the lighting, and the presence or absence of accessories. And the environmental analysis factors of the avatar maker were set and solutions to problems derived during the analysis process were presented.

• Korean Institute of Interior Design Journal
• /
• no.30
• /
• pp.86-91
• /
• 2002

HCI (Human Computer Interface)is important key of software design. Effectiveness and productivity of CAD software is creation is not study actively in architectural part. The results of this study \circled1 HCI of architectural modeling is demanded effective design of keypad and short key. \circled2 It is require that system reactions to be united in one interface in order to hold in check confusion of the information. \circled3 Intelligent interface for continuous update of 3D information is required.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.71-78
• /
• 2018

In this study, human mimic phantoms outputted by three-dimensional (3D) printing technology are reported. Polylactic acid and a personal 3D printer - fused deposition modeling (FDM) - are used as the main material and the printing device. The output of human mimic phantoms performed in the following order: modeling, slicing and G-code conversion, output variable setting, 3D output, and post-processing. The students' learning satisfaction (anatomical awareness, study interest) was measured on 5-point Likert scale. After that, Twenty of those phantoms were outputted. The total output took 11,691 minutes (194 hours 85 minutes) and the average output took 584.55 minutes (9 hours 7 minutes). The filament used for the experiment was 2,390.2 g, and the average use of the filament was 119.51 g. The learning satisfaction of anatomical awareness was 4.6 points on the average and the interest of the class was on average 4.5 points. It is expecting that 3D printing technology can enhance the learning effect of imaging anatomy education.

• Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.286-294
• /
• 2016

In this paper we present an efficient technique for sketch-based 3D modeling using automatically extracted image features. Creating a 3D model often requires a drawing of irregular shapes composed of curved lines as a starting point but it is difficult to hand-draw such lines without introducing awkward bumps and edges along the lines. We propose an automatic alignment of a user's hand-drawn sketch lines to the contour lines of an image, facilitating a considerable level of ease with which the user can carelessly continue sketching while the system intelligently snaps the sketch lines to a background image contour, no longer requiring the strenuous effort and stress of trying to make a perfect line during the modeling task. This interactive technique seamlessly combines the efficiency and perception of the human user with the accuracy of computational power, applied to the domain of 3D modeling where the utmost precision of on-screen drawing has been one of the hurdles of the task hitherto considered a job requiring a highly skilled and careful manipulation by the user. We provide several examples to demonstrate the accuracy and efficiency of the method with which complex shapes were achieved easily and quickly in the interactive outline drawing task.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.69-76
• /
• 2003

Recently, in computer graphics, researches on 3D animations have been very active. one of the important research areas in 3D animation is animation of human being. The creation and animation of 3D facial models has depended on animators' manual work frame by frame. Thus, it needs many efforts and time as well as various hardwares and softwares. In this paper, we implements a way to generation 3D human face model easily and quickly just with the front face images. Then, we suggests a methodology for mesh data simplification of 3D generic model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6019-6026
• /
• 2015

In this study, we have tried to use 3D-printing technology, which is very useful for small amount production and individual personalization manufacturing to produce a cast customized by individual. To do this, we have made casts by the 3D printer in the method of fused deposition modeling technique using ABS(acrylonitrile butadiene styrene) resin which is thermoplastic plastics. The computed tomography of human hand part was used as the modeling of the cast and it was designed to circulate air well. As a result, an individual personalized cast that fitted well with the model part was produced. In addition, we could get more excellent radiography from the cast than the existing cast. In conclusion, this study of 3D-printing could be used as basic data when a similar designed structure in fused deposition modeling technique by ABS resin is printed out.