Browse > Article
http://dx.doi.org/10.7742/jksr.2018.12.1.71

A Case Study of Three Dimensional Human Mimic Phantom Production for Imaging Anatomy Education  

Seoung, Youl-Hun (Department of Radiological Science, College of Health Medical Science, Cheongju University)
Publication Information
Journal of the Korean Society of Radiology / v.12, no.1, 2018 , pp. 71-78 More about this Journal
Abstract
In this study, human mimic phantoms outputted by three-dimensional (3D) printing technology are reported. Polylactic acid and a personal 3D printer - fused deposition modeling (FDM) - are used as the main material and the printing device. The output of human mimic phantoms performed in the following order: modeling, slicing and G-code conversion, output variable setting, 3D output, and post-processing. The students' learning satisfaction (anatomical awareness, study interest) was measured on 5-point Likert scale. After that, Twenty of those phantoms were outputted. The total output took 11,691 minutes (194 hours 85 minutes) and the average output took 584.55 minutes (9 hours 7 minutes). The filament used for the experiment was 2,390.2 g, and the average use of the filament was 119.51 g. The learning satisfaction of anatomical awareness was 4.6 points on the average and the interest of the class was on average 4.5 points. It is expecting that 3D printing technology can enhance the learning effect of imaging anatomy education.
Keywords
Imaging anatomy; Education; 3D printing; Human mimic phantom; Learning satisfaction;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 C. H. Song, Historical Figures in Anatomy, Jeong Seok Publishing, 2015.
2 W. B. Lee, S. H. Baik, "Status of Cadaver Collection of Medical Colleges for Their Anatomy Education in Korea," Korean Journal of Physical Anthropology, Vol. 11, No. 2, pp. 237-246, 1998.   DOI
3 B. H. Kang, J. S. Kim, H. W. Kim, "Study for Operation Teaching Machine Using 3D Virtual Reality System," Journal of Digital Contents Society, Vol. 17, No. 4, pp. 287-293, 2016.   DOI
4 W. J. Choi, D. H. Kim, "Making Human Phantom for X-ray Practice with 3D Printing," Journal of the Korea Society of Radiology, Vol. 11, No. 5, pp. 370-377, 2017.
5 Y. H. Seoung, "Evaluation of Image Uniformity and Radiolucency for Computed Tomography Phantom Made of 3-Dimensional Printing of Fused Deposition Modeling Technology by Using Acrylonitrile Butadiene Styrene Resin," Journal of Radiological Science and Technology, Vol. 39, No. 3, pp. 337-344, 2016.   DOI
6 Y. H. Seoung, "Comparison of Hounsfield Units by Changing in Size of Physical Area and Setting Size of Region of Interest by Using the CT Phantom Made with a 3D Printer," Journal of Radiological Science and Technology, Vol. 38, No. 4, pp. 421-427, 2015.   DOI
7 H. S. Choi, M. R. Yu, "A Study on Educational Utilization of 3D Printing: Creative Design Model-based Class," Journal of Korean Association of Information Education, Vol. 19, No. 2, pp. 167-174, 2015.   DOI
8 H. J. So, J. H. Lee, B. K. Kye, "An Exploratory Study about the Activity Framework for 3D Printing in Education and Implementation," Journal of Korean Association of Information Education, Vol. 21, No. 4, pp. 451-462, 2017.   DOI
9 I. H. Lee, J. M. Shin, H. Y. Cho, "Design and Operation of 3D Printing Education Curriculum in Mechanical Engineering," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 21-26, 2015.   DOI
10 https://www.thingiverse.com/
11 https://www.myminifactory.com/
12 https://www.stlfinder.com/
13 J. P. Kruth, M. C. Leu, T. Nakagawa, "Progress in Additive Manufacturing and Rapid Prototyping," CIRP Annals, Vol. 47, No. 2, pp. 525-540, 1988.
14 Y. H. Seoung, "A Study of 3D Printing of Self-Customization Cast by Using Fused Deposition Modeling Technique of ABS Resin," Journal of the Korea Aca demia-Industrial cooperation Society, Vol. 16, No. 9, pp. 6019-6026, 2015.   DOI
15 W. K. Oh, "Evaluation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer," Journal of Radiological Science and Technology, Vol. 37, N o. 3, pp. 203-209, 2014.
16 Y. H. Seoung, "3-Dimension Printing for Mesh Types of Short Arm Cast by Using Computed Tomography," Journal of Contents Association, Vol. 15, No. 1, pp. 308-315, 2015.   DOI