• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.379-380
• /
• 2009

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.87-110
• /
• 2020

Catamaran has recently been a choice to support a typical vertical axis turbine in floating tidal current energy conversion system. However, motion responses associated with the catamaran can reduce the turbines efficiency. The possibility to overcome this problem isto change the catamaran parameter by varying and simulating the demi-hull separations to have lower motion responses. This simulation was undertaken by Computational Fluid Dynamic (CFD) using potential flow analysis. Cases of demi-hull separation were considered, with ratios of demi-hull separation (S) to the breadth of demi-hull (B), ^S/_B of 3.45, 4.95, 6.45, 7.2 and 7.95. In order to compare to the previous works in the literature, the regular wave was set with wave height of 0.8 m. Furthermore, the analysis was carried out by irregular waves with significant wave height, H_s, of about 0.09 to 1.5 m and the wave period, T, of about 1.5 to 6 s or corresponding to the wave frequency, ω, of about 1.1 to 4.2 rad/s. The wave spectrum was derived from the equation of the International Towing Tank Conference (ITTC). For the case of turbines-loaded catamaran under consideration, the new finding is that the least significant amplitude response can be satisfied at the ratio ^S/_B of 7.2. This study indicates that selecting a right choice of demi-hull separation ratio could contribute in reducing motion responses of the tidal current turbines-loaded catamaran.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.655-669
• /
• 2015

The Overall Motion Sickness Incidence is applied to the hull form optimization of a wave piercing high-speed catamaran vessel. Parametric hull modelling is applied to generate two families of derived hull forms, the former varying the prismatic coefficient and the position of longitudinal centre of buoyancy, the latter instead the demi-hull separation. Several heading angles are analysed in a seaway, considering all combinations of significant wave height and zero-crossing period under two operating scenarios. The optimum hull is generated and vertical accelerations at some critical points on main deck are compared with the parent ones. Finally a comparative analysis with the results obtained for a similarly sized monohull passenger ship is carried out, in order to quantify, by the OMSI, the relative goodness in terms of wellness onboard of monohulls and catamarans, as a function of sea states and operating scenarios.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1154-1157
• /
• 2003

The spent fuel slitting device is an equipment developed for the separation of the pellet and hull from the cutting fuel rod with length of 250 mm, and in order to feed UO$_2$ pellet. We have analyzed on the existing technologies for designing and producing of the slitting device in the first year(2001), based on these results, designed and produced the rod slitting device. It has effectively separated the pellet from the hull, but demanded the supplement separation work because of the mixing with pellet and hull in the vessel, and required the condition for the reducing time of the process. In the second year(2002), we have reduced the work time, performed the test and capacity evaluation with the improving device, based these results, and ensured the data demanded for designing of the spent fuel rod slitting device. We have compared with the DUPIC(Direct use of spent PWR fuel in CAND reactors) process, and developed the device for the purpose of reducing over 40 % in comparition with the DUPIC operation time(5 minutes). Based on these results, it will is effectively applied to available data for designing and producing of the hot test facility.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.757-758
• /
• 2009

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.431-437
• /
• 2018

The running attitude of a planing hull is determined by the pressure distribution on the hull bottom, and it significantly affects hydrodynamic performance of the ship, i.e., resistance, maneuverability, and seakeeping ability. Therefore, it is essential to investigate pressure distribution on the hull bottom in order to improve hull design. In the present study, a novel pressure measurement system using tactile sensors was introduced for a planing hull. The test model was a 23 m-class planing hull with a hard chine. The pressure measurement showed that the pressure at the transom was lower than the atmospheric pressure, owing to flow separation at the transom.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.615-624
• /
• 2016

본 연구는 해상에서 근접하여 계류된 직사각형 박스 형상의 두 바지선을 대상으로 유체역학적 상호작용으로 인한 선체운동 응답특성을 분석하기 위하여 수치시뮬레이션을 실시하였다. 이 수치시뮬레이션 실험에서는 DNV-GL의 SESAM 수치해석솔루션을 사용하여 결합된 강성 메트릭스항(coupled stiffness matrix terms)을 다중물체 모드(multiple body modes)의 surge 방향에 추가하였고, 실험에 적용한 바지선 모델의 1차 방사 및 산란 영향을 계산하기 위하여 퍼텐셜 이론을 적용하였다. 실험 결과, 두 바지선의 횡간격 20 m, 횡파 실험조건 경우에 1.3 rad/s에서 실험선의 피난효과(sheltering effect)가 나타나지 않았다. 실험 모델 상호간 횡간격의 영향은 종파와 천수역 실험 조건에서 분명하게 나타났지만, sway force는 횡파일 경우에 두 실험 모델선과의 접근거리 간격에 영향을 받았다. 실험모델의 횡간격이 좁아지면 종파와 사파의 경우에 sway, heave 운동과 sway force의 피크는 높은 주파수대로 이동하였다. 수심이 10 m일 때 풍하측 바지선의 sway 운동은 횡파와 사파의 경우에 0.2-0.8 rad/s 주파수대에서 큰 차이를 보였으며, 입사파의 방향이 달라져도 sway force의 피크는 보다 낮은 주파수대에서 나타났다.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2001

A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

• 대한조선학회지
• /
• 제15권4호
• /
• pp.20-23
• /
• 1978

This paper describes newly developed part generation program on the basis of ACUTE. New program named as ASEP(Automatic Separation Program) has function to separate a contour defined by ACUTE into several parts and store them in the part file. The separation flow is as follows, (1) Basic Contour Generation using ACUTE (2) Separation Line Definition (3) Separation into several parts (4) Storing parts in the part file with their individual name The merit of ASEP is to reduce the number of input cards and to simplify input statements.