• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2263-2269
• /
• 2005

The ship wave phenomena in the restricted waterway were investigated by a numerical analysis. The Euler and continuity equations were employed for the present study. The boundary fitted and moving grid system was adopted to enhance the computational efficiency. The convective terms in the governing equations and the kinematic free surface boundary condition were solved by the Constrained Interpolated Profile (CIP) algorithm in order to solve accurately wave heights in far field as well as near field. The advantage of the CIP method was verified by the comparison of the computed results by the CIP and the Maker and Cell (MAC) method. The free surface flow simulation around Wigley hull was performed and compared with the experiment for the sake of the validation of the numerical method. The present numerical scheme was applied to the free surface simulation for various canal sections in order to understand the effect of the sectional shape of waterways on the ship waves. The wave heights on the side wall and the shape of the wave patterns with their characteristics of flow are discussed.

• Journal of the Korean institute of surface engineering
• /
• v.16 no.4
• /
• pp.160-172
• /
• 1983

티오요소류, 폴리에테르류, 염료와 같은 유기화합물이 첨가된 황산동 전기도금욕에서 석출된 구리의 광택, 평활력효과를 무첨가욕과 기존 광택제가 첨가된 도금욕에서와 각각 비교하여 이들 유기첨가제가 구리의 석출상태와 음극분극에 미치는 영향을 Hull cell 실험과 현미경관찰, 전기화학적 측정방법에 의해 고찰하였다. 황산동 전기도금욕에서 thiourea, 2-mercapto-2-imidazoline, 1-acetyl-2-thiourea와 같은 유기 황화합물은 비교적 고전류 밀도 범위에서 결정성장이 억제되고 입자가 미세한 구리석출을 일으켜 양호한 광택효과와 평활력을 가져오나, 특히 저전류밀도에서는 해로운 줄무늬가 발생한다는 점에서 많은 개선의 여지가 필요하다. 그러나 이들 유기 황화합물에 1,3-dioxolane polymer와 소량의 염소 이온을 혼합 첨가할 것 같으며 넓은 전류밀도 범위에서 양호한 광택과 평활력이 있는 동석출을 얻을 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.124-125
• /
• 2007

3가크롬도금 공정 최적화를 위하여 다양한 전기화학적인 기법-즉, Hull cell test, 동전위 분극 실험, 정전류 분극 실험-과 표면 형상 분석이 수행되었다. 3가크롬도금은 용액 pH가 증가함에 따라 조악한 표면 형상을 가졌고, 도금액 온도 증가 시 표면 상 nodule 밀도가 낮아졌다. 본 실험 환경에서 3가크롬도금 공정 최적 조건은 pH2.5-3.0, 온도 $30-40^{\circ}C$, 인가전류밀도 $10-20A/dm^2$이었다.

• Journal of the Korean Society of Visualization
• /
• v.19 no.2
• /
• pp.48-55
• /
• 2021

In order to design a propeller with high efficiency and excellent cavitation performance, theoretical and experimental studies on the cavitation and noise characteristics according to the blade section shape are essential. In general, sheet cavitation, bubble cavitation, and cloud cavitation are the main causes of hull vibration and propeller surface erosion. However vortex cavitation, which has the greatest influence on the noise level because the fastest CIS in ship propeller, has been researched for a long time and studies have been conducted recently to control it. In this experiment, the development process of cavitation was measured by using three dimensional wings with two different wing section and wing tip shapes, and the noise level at that time was evaluated. In addition, we evaluated the relationship between cavitation inception and hydrodynamic force using three component load cell and we measured the velocity field of wing wake using LDV.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.356-364
• /
• 2009

The current ruminant feeding models require parameterization of the digestion kinetics of carbohydrate fractions in feed ingredients to estimate the supply of nutrients from a ration. Using an automated gas production technique, statistically welldefined digestion rate of carbohydrate, including soluble carbohydrate, can be estimated in a relatively easy way. In this study, the gas production during in vitro fermentation was measured and recorded by an automated gas production system to investigate degradation kinetics of carbohydrate fractions of a wide range of ruminant feeds: corn silage, rice straw, corn, soybean hull, soybean meal, and cell mass from lysine production (CMLP). The gas production from un-fractionated, ethanol insoluble residue and neutral detergent insoluble residue of the feed samples were obtained. The gas profiles of carbohydrate fractions on the basis of the carbohydrate scheme of the Cornell Net Carbohydrate and Protein System (A, B1, B2, B3 and C) were generated using a subtraction approach. After the gas profiles were plotted with time, a curve was fitted with a single-pool exponential equation with a discrete lag to obtain kinetic parameters that can be used as inputs for modern nutritional models. The fractional degradation rate constants (Kd) of corn silage were 11.6, 25.7, 14.8 and 0.8%/h for un-fractioned, A, B1 and B2 fractions, respectively. The values were statistically well estimated, assessed by high t-value (>12.9). The Kd of carbohydrate fractions in rice straw were 4.8, 21.1, 5.7 and 0.5%/h for un-fractioned, A, B1 and B2 fractions, respectively. Although the Kd of B2 fraction was poorly defined with a t-value of 4.4, the Kd of the other fractions showed tvalues higher than 21.9. The un-fractioned corn showed the highest Kd (18.2%/h) among the feeds tested, and the Kd of A plus B1 fraction was 18.7%/h. Soybean hull had a Kd of 6.0, 29.0, 3.8 and 13.8%/h for un-fractioned, A, B1 and B2, respectively. The large Kd of fraction B2 indicated that NDF in soybean hull was easily degradable. The t-values were higher than 20 except for the B1 fraction (5.7). The estimated Kd of soybean meal was 9.6, 24.3, 5.0%/h for un-fractioned, A and B1 fractions, respectively. A small amount of gas (5.6 ml at 48 ho of incubation) was produced from fermentation of CMLP which contained little carbohydrate. In summary, the automated gas production system was satisfactory for the estimation of well defined (t-value >12) kinetic parameters and Kd of soluble carbohydrate fractions of various feedstuffs that supply mainly carbohydrate. The subtraction approach, however, should be applied with caution for some concentrates, especially those which contain a high level of crude protein since nitrogen-containing compounds can interfere with gas production.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1078-1083
• /
• 1996

During the pearling process of hull-less barley, protein, lipid, ash and insoluble dietary fiber (IDF) contents decreased, while soluble dietary fiber (SDF) and ${\beta}-glucan$ contents slightly increased. Depending on milling methods and types of grinding mills used, there were differences in particle size distribution of barley flour. Flour particle size was smaller in the following order of Fitz mill, Ball mill, Pin mill, Cyclotec sample mill and Jet mill. Color (brightness) was closely related to the particle size of barley flour. Damaged starch (%) in pearled barley flour was the highest in Jet mill among different mills. Flours prepared with Cyclone mill and Pin mill had a reasonable amount of damaged starch. Flour produced by Fitz mill showed the lowest amount of damaged starch. Scanning electron microscopy (SEM) of the flour samples demonstrated different sizes and shapes of particles consisting of starch granules and cell wall materials. Damaged starch tended to increase water absorption index (WAI), water solubility index (WSI), and water retention capacity (WRC). Pasting viscosity determined by amylograph was relatively high in Pin-milled and Cyclone-milled flours. Viscosity was the lowest in coarsely ground flour by Fits mill.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.66-73
• /
• 2013

This study was conducted to determine the effects of rice hull cover on seed germination and tray types, soil types, shading conditions for seedling growth of Codonopsis pilosuala. We also examined the feasibility of cultivation of small seedlings transplanted in the Gyeonggi-do area for a month. Under control condition, the seed germination was 8% whereas it dramatically increased to 78% under rice hull cover treatment. Under the different conditions (tray types, soil types, and shading conditions), young seedlings showed the best quality without shading in TKS soil of 50 plug cell tray, with the growth characteristics of plant height (11.9 cm), number of leaves (71), leaf width (3.1 cm), leaf length (2.6 cm), and root length (14.3 cm). Seedling quality was the best without any shading in TKS+perlite, with the physiological characteristics of evaporation (3.9 $mmol{\cdot}m^{-2}s^{-1}$), carbon assimilation (9.1 ${\mu}mol{\cdot}m^{-2}s^{-1}$), and water use efficiency (2.2 ${\mu}mol{\cdot}m^{-2}s^{-1}$). Considering the economical, morphological, physiological and survival rate of the seedlings, it was an ideal method for transplanting seedlings in the field after they have been grown for 30-45 days in TKS and TKS+perlite of 200 plug cell tray in 0% or 30% shaded conditions. As the results of 5 months examination on the possibility to cultivate Codonopsis pilosuala in the Gyeonggi-do area, 88% to 96% of survival rate was observed with normal induced flowers. Therefore, cultivation of Codonopsis pilosuala was possible in the Gyeonggi-do area. While there were symptoms of etiolation and wilting under no shading condition, they did not appear in 30% and 70% shading conditions. Therefore, cultivation of Codonopsis pilosuala is considered to be necessary 30% or 70% shading.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.125-130
• /
• 2002

An attempt was made for the application of porous reticular metal to a heat dissipation material in semiconductor process. For this aim, the electrodeposition of Fe/Ni alloy on the porous reticular Cu has been performed to minimize the thermal expansion mismatch between Cu skeleton and electronic chip. Preliminary tests for the electrodeposition of Fe/Ni alloy layer were conducted by using standard Hull Cell to examine the effect of current density on the composition of alloy layer. It seemed that mass transfer affected significantly the composition of Fe/Ni layer due to anomalous codeposition in the electrodeposition of Fe/Ni alloy. A paddle type stirring bath, which was employed to control the mass transfer of electrolyte in the work, was found to allow the electrodeposition Fe/Ni with a precise composition. result showed that the thermal expansion of Fe/Ni alloy layer was much lower than that of pure copper. From the tests of heat dissipation by using the apparatus designed in the work the heat dissipation material fabricated in the work showed the excellent heat dissipation capacity, namely, more than two times as compared to that of pure copper plate.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1402-1408
• /
• 2010

The effects of rice hull (RH) powder on the anticarcinogenic activity of submerged-liquid cultures of Agaricus blazei Murill (AB) were assessed for mouse ascites cancers induced by mouse Sarcoma S-180 (S-180) cancer cells. Optimal growth of AB mycelia in the basal liquid culture medium, containing soybean meal, was achieved by culturing at $25^{\circ}C$ for 5 days, when evaluated by $\beta$-glucan content, Brix, and mycelial weight, relative to other culture conditions. Hot-water extract (HWE) of the submergedliquid culture of AB mycelia grown at $25^{\circ}C$ for 5 days exhibited a stronger anticarcinogenic activity, relative to HWE from other culture conditions. No such effects were obtained from AB mycelial cultures by alternative temperature-controlling cultures. Both cytotoxicity for S-180 cells and anticarcinogenic potentials for mouse ascites cancer of the HWE from AB mycelia grown in the basal medium containing 1% RH powder for 5 days at $25^{\circ}C$ were significantly (p<0.05) enhanced, relative to HWE from the AB mycelia culture of the basal medium without RH powder. These results indicate that HWE of submerged-liquid culture of AB mycelia, incubated in media containing 1% RH powder at $25^{\circ}C$ for 5 days, enhanced anticarcinogenic activity against S-180 cell-induced mouse ascites cancer, and suggest that RH powder is an excellent ingredient for the improvement of the anticarcinogenic potentials of the submerged-liquid culture of mushroom mycelia.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.99-106
• /
• 2008

We examined the effects of crude and eight pure material (${\beta}$-sitosterol, ${\beta}$-sitosterol-${\beta}$-D-glucoside, 1-tetratriacontanol, hentriacontane, orizaterpenoid, stigmas-5-en-$3{\alpha}$ 26-diacetate, stearic acid, myristic acid), extracted from rice hull, on growth inhibition of toxic cyanobacterium, Microcystis aeruginosa NIER 10010. Strains of M. aeruginosa and Daphnia magna, obtained from the NIER (Korea) and BBE (Germany), were cultured in the CB medium with hard water. For all four treatment concentrations 0, 10, 100 and $1,000{\mu}g\;L^{-1}$) of the crude extract, the cell number of M. aeruginosa was reduced by $59{\sim}73%$ during the 7-day test period. Among eight kinds of pure extracts, ${\beta}$-sitosterol-${\beta}$-D-glucoside, hentriacontane and orizaterpenoid $(1,000{\mu}g\;L^{-1})$ exhibited relatively higher growth inhibition compared with other pure extracts. The mixture of three pure extracts (${\beta}$-sitosterol-${\beta}$-D-glucoside, hentriacontane and orizaterpenoid) showed the highest growth inhibition at $1,000{\mu}g\;L^{-1}$. Therefore, the synergistic effect was significantly highlighted by a mixture of the three pure extracts (p<0.05). Under the condition of $1,000{\mu}g\;L^{-1}$ in the crude extracts, D. magna exhibited survival rate by >85% for 96 hours. In conclusion, the growth inhibition of M. aeruginosa was probably attributed to the synergistic effect of various compounds extracted from the rice hull.