• 한국해양공학회지
• /
• 제28권1호
• /
• pp.20-27
• /
• 2014

In view of the importance of material reduction and rational structural design due to the rapid increase in oil and steel prices, an optimized structural hybrid design system for the doubler plate of a ship's hull structure was developed. A direct design process by a structural designer was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. As the first step of the doubler design system development, the design formulas used in doubler design system were introduced. Based on the introduction of influence coefficients $K_{t_c}$ $K_{t_d}$, $K_{b_d}$ and $K_{a_d}$ according to the variations in the doubler length, breadth, doubler thickness, and average corrosion thickness of the main plate, the design formulas for an equivalent plate thickness were developed, and a hybrid design system using these formulas was suggested for the slender doubler plate of a ship structure subjected to a longitudinal in-plane compression load. By using this developed design system, a more rational doubler plate design can be expected considering the efficient reinforcement of the plate members of ship structures. Additionally, a more detailed structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for the doubler plate.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.244-248
• /
• 2000

199년경 한국 남해안 어선의 특징은 독창적이고 견고하여 한반도 주변의 해양조건에 적합하고 우리 선조들의 훌륭한 조선기술을 확인할 수 있었으며, 그 결과를 요약하면 다음과 같다. (1) 본 연구에 사용한 시험대상 어선은 고대 어선에 비하여 비교적 세형으로서 1900년경의 선형이 개량되었음을 알 수 있었다. (2) 용골은 각형단면인 방형용골(bar keel)로 되어 있으며, 선수부는 방형선수재의 구조로서 예리한 pointed stem을 이루고 있다. (3) 외판은 턱붙이 클링커 이음방법으로 접합되어 있었다. (4) 권형망어선의 L/B, L/D, B/D의 값이 자망어선의 값에 비하여 크게 나타났다. (5) 복원성은 두 선박이 양호한 편이며 권형망어선이 자망어선에 비해서 더 우수한 것으로 나타났다.

• 대한조선학회지
• /
• 제3권1호
• /
• pp.33-45
• /
• 1966

The effect of thermal stress on a ship's hull is not considered to be serious by most naval architects. Frequently, however, cracking of hulls has been reported which occurred at sea while there were no external forces except the heat from the sun. Detailed investigations have been made of these reports and it has been reliably determined that the damage was initiated by solar heating. The author is not interested in all steel ship or in the applicability and validity of the formular itself, as it has already been proven by the experiments such as S.S. Boulder Victory. The author therefore proceeds directly to calculate the stress distribution on he hull and superstructure of the prototype model ship. These calculations are based on the experimental nonsymetrical temperature gradient data taken earlier on the Boulder Victory. The calculations were made principally to determine the extent of stresses which occurred on an all-steel ship in one case and secondly, those that occurred on a ship with a steel hull and an aluminum superstructure. From the calculations, the author expected the stress distribution of the two case would show distinctly different aspects, but the acquired results were very similar. Generally, at the point of junction of the steel hull and aluminum superstructure sharp peak stresses appeared. At the juncture of the superstructure and the main deck the ship with the aluminum superstructure registered almost 1000 psi more stress than did the ship with the all-steel construction. In the view of these findings, the author recommends to ship designers that pay particular attention to the point of junction of steel and aluminum plate. The author has proven that it is extremely important that a greater safety factor be used at the aluminum-steel junction point than at any other point. Although thermal effects cause high juncture-point stresses in all-steel ships, they are not nearly as critical as in ship constructed of two or more metals.

• 수산해양기술연구
• /
• 제27권3호
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.731-738
• /
• 2017

쌍동선의 경우 선미의 형상적인 특이성으로 인하여, 두 개의 선체를 연결하는 부위는 선박의 항해 시 발생되는 피칭운동에 의한 손상이 자주 발생하고 있으며, 이로 인하여 주변부에 대한 구조보강 설계가 필요하다. 이러한 국부 보강에 대한 구조설계 지침이 명확하지 않기 때문에, 엔지니어는 판 두께, 보강재 변경 및 프레임 간격을 줄이는 방법으로 대응을 하고 있다. 그러나 이러한 부위는 선박의 길이방향으로 약 85 % 이상 위치하고 있기 때문에, 최소 구조부재를 국부 보강하여 중량 증가를 최소화하고, 이에 따른 건조비 증가 및 건현확보의 문제를 해결해야 한다. 따라서 본 연구에서는 KR(한국선급)의 고속경구조선 규칙을 바탕으로, 쌍동형 카페리 구조설계 절차를 분석하고 추가가 필요한 항목을 발굴하여 쌍동형 구조설계 프로그램을 개발하였다. 좌굴강도 평가 절차서 및 프로그램에 대한 신뢰성을 확보하기 위하여, 타 선급의 기준과 비교 검토를 수행하여 6 %내 차이가 발생함을 확인하였다.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.66-80
• /
• 1996

최근 고장력강(高張力鋼)이 구조물에 폭넓게 사용되고 있어서 판두께가 얇아지고 있다. 판두께가 얇아지므로해서 좌굴(座屈)이 발생하기 쉽다. 그러므로 좌굴(座屈)발생후 판의 거동(擧動)을 정확하게 파악하는 것은 중요하다. 좌굴(座屈) 발생후 2차좌굴(次座屈)이라고 하는 하중하(荷重下)에서는 판(板)의 처짐모드가 갑자기 변한다. 전체구조물의 붕괴강도(崩壞强度)를 고려할 때 2차좌굴(次座屈)은 매우 중요하다. 이런 관점에서 본 연구에서는 면내압축하중(面內壓縮荷重)을 받는 판(板)의 2차좌굴거동(次座屈擧動)에 관하여 연구하였다. 초기처짐을 갖는 판(板)을 대상으로 하여 탄성대변형해석(彈性大變形解析)을 실시하여, 2차좌굴(次座屈)의 영향을 검토하였다. 그 결과로서 다음과 같은 결론(結論)을 얻었다. 즉, 정사각형판은 대칭의 처짐성분은 영향이 있으나 비대칭의 처짐성분은 영향이 전혀 없다. 또한, 종횡비(縱橫比)를 갖는 판(板)은 모든 처짐성분의 영향이 있으며 초기좌굴(初期座屈)후 면내강성(面內剛性)이 계속적으로 감소한다.

• 대한조선학회지
• /
• 제13권4호
• /
• pp.19-24
• /
• 1976

Some method of analysis of rectangular plates under distributed load of various intensity with all edges built in are presented in. Analysis of many structures such as bottom, side shell, and deck plate of ship hull, and flat slab, deck systems of bridges is a problem of plate with continuous supports or clamped edges. When the four edges of rectangular plate is simply supported, the double fourier series solution developed by Navier can represent an exact result of this problem. If two opposite edges are simply supported, Levy's method is available to give an "exact" solution. When the loading condition and boundary condition of a plate does not fall into these cases, no simple analytic method seems to be feasible. Analysis of a plate under distributed loads of various intensity with all edges built in is carried out by applying Navier solution and Levy's method as well as "Principle of Superposition" In discussing this problem we start with the solution of the problem for a simply supported rectangular plate and superpose on the deflection of such a plate the deflections of the plate by slopes distributed along the all edges. These slopes we adjust in such a manner as to satisfy the condition of no rotation at the boundary of the clamped plate. This method can be applied for the cases of plates under irregularly distributed loads of various intensity with two opposite edges simply supported and the other two edges clamped and all edges simply supported and this method can also be used to solve the influence values of deflection, moment and etc. at arbitrary position of plates under the live load.

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.104-113
• /
• 1998

선박 생산 현장에서는 선체의 곡가공을 위해 선상가열법이 널리 사용되고 있다. 최근 선박 생산성 향상을 위하여 선상가열법에 의한 강판 곡가공 자동화 시스템에 대한 연구가 활발히 진행되고 있으나, 그 연구들은 주로 각각의 가정된 역학 모델을 도입하여 가열에 의한 판의 변형 거동을 해석하는 데에 집중되고 있고, 실제 곡면 가공에 이용될만한 실용성있는 가열선 결정 방법을 제시하는 것은 드물다. 본 논문에서는 선상가열 공정을 시뮬레이션하기 위해 새로운 가열선 결정 알고리즘을 제안한다. 이 알고리즘의 특징은 가공곡면과 목적곡면의 차이를 나타내는 변위차이곡면의 곡률을 계산하는 것이다. 몇 가지의 전형적인 곡면 형상에 대해 점검한 결과, 실용성과 적용 가능성을 확인하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.25-26
• /
• 2007

Ship are typically thin-walled structures and consists of stiffened plate structure by purpose of required design load and weight reduction etc. Also, a hull structural characteristics are often used in structures with curvature at deck plating with camber, side shell plating at fore and aft parts and bilge circle parts, It have been believed that these structures can be modelled fundamentally by a part of cylinder. Structural component with curvature subjected to combined loading regimes and complex boundary conditions, which can potentially collapse due to buckling. Hence, for more rational and safe design of ship structures, it is crucial importance to better understand the interaction relationship of the buckling and ultimate strength for cylindrically curved plate under these load components. In this study, the ultimate strength characteristic of curved plate under combined load(lateral pressure load + axial compressive load) are investigated through using FEM series analysis with varying geometric panel properties.

• 대한조선학회논문집
• /
• 제36권2호
• /
• pp.94-104
• /
• 1999

고장력강을 주로 사용하는 선체에서 좌굴은 중요한 설계기준이 된다. 판부재는 주로 면내강성을 갖는다. 만약 2차좌굴로 인하여 선체판의 면내강성이 저하한다면 선박전체의 종강도는 크게 저하한다. 그러므로, 판부재의 좌굴후거동과 같은 기하학적 비선형거동을 정확히 규명하여야 하는 것은 구조물 전체적으로 매우 필요하다. 이상과 같은 관점에서 본 논문에서는 에너지법을 이용하여 압축하중을 받는 단순지지판의 기하학적 비선형거동을 규명하였다. 에너지 법을 바탕으로 선체판의 탄성대변형해석을 수행하였고 분기점형좌굴과 극한점형좌굴에 대하여 규명하였다.