• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.612-615
• /
• 2013

허브(hub) BLDC(Brushless Direct Current) 전동기란 아우터로터 타입 고효율 전동기로 다극의 영구자석으로 이루어진 회전자가 바퀴의 구동축이 되는 직접구동용 모터를 말하며, 휠인모터라고도 불린다. 본 연구에서는 허브모터를 구동축으로 갖는 2륜 또는 3륜 구동체를 구동하기 위한 BLDC 허브모터 속도 제어기를 PIC 마이크로 컨트롤러를 이용하여 설계한다. 구동기는 6 개의 독립된 MOSFET 스위칭소자를 사용하여 구성하며, 게이트 구동회로는 직접 설계하여 경제성을 높인다.

• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.203-210
• /
• 2008

바퀴와 BLDC전동기 일체형으로 구성되는 Hub Wheel 전동기는 감속기가 없는 직접 구동방식으로서 저소음 고효율의 운전이 가능하여 경전철의 구동부로 활용이 가능하다. 하지만 Hub Wheel 전동기는 속도계측을 위한 센서의 장착이 용이하지 않다. 전동기의 원활한 속도 제어를 위해서는 별도의 속도 계측을 위한 방법이 요구된다. 본 논문에서 입력이 적극 반영된 간단한 수학적 시스템 모델을 가지고 이산 칼만 필터를 사용하여 전동기 속도를 추정하고 이를 이용하여 속도제어를 하는 방법을 제시한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.380-383
• /
• 2014

허브(hub) BLDC(Brushless Direct Current) 전동기란 아우터로터 타입 고효율 전동기로 다극의 영구자석으로 이루어진 회전자가 바퀴의 구동축이 되는 직접구동용 모터를 말하며, 휠인 모터로도 불린다. 본 연구에서는 BLDC 허브 모터 구동을 위한 벡터제어 기법 속도 제어기를 dsPIC30f2010 16비트 마이크로 컨트롤러를 이용하여 설계한다. 특히 복잡한 연산 시간을 줄이는 벡터 제어 방법을 제안하고, MOSFET 인버터 구동기를 직접 설계하여 경제성을 높인다.

• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.57-62
• /
• 2012

The constant air volume flow fan can maintain constant flow rate to the wide range of exit pressure. Therefore, the use of this fan is increasing recently for ventilation of high building. Brushless DC motor is adopted to this fan because that has advantages of compactness and performance. But this type of motor protrude from impeller hub side to fan inlet. The Impeller inlet flow is influenced by size of this obstacle called hub. In this paper, the influence of hub shape on the fan performance characteristics are experimentally and numerically analyzed. CFX 12.0 is used to perform the fan internal flow analysis and numerical results are compared with the experiments. Depending on hub shape, internal loss is generated and the performance and efficiency are reduced. The best performance is occurred around $h/b_1$ = 0.25. The results of this study will be contribute to initial design of constant air volume flow fan development.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.614-619
• /
• 2009

The STW(servo track writing) system which is the process of writing servo signals on disks before assembling in drives uses the spindle motor-chuck mechanism to realize low cost because the spindle motor-chuck mechanism has merit which can simultaneously write multi-disk by piling up disks in hub. Therefore, when the spindle motor-chuck mechanism of horizontal type operates in high rotation speed it is necessary to reduce the effect of RRO(repeatable run-out) and NRRO(non-repeatable run-out) to achieve the high precision accuracy of nano-meter level during the STW process. In this paper, we analyzed that the slip in assembly surfaces can be caused by the mechanical tolerance and clamping force in hub-chuck mechanism and can affect NRRO performance. We designed springs for centering and clamping considering centrifugal force by the rotation speed and assembly condition. The experimental result showed NRRO performance improves about 30 % than case of weak clamping force. The result shows that the optimal design of the spindle motor-chuck mechanism can effectively reduce the effect of NRRO and RRO in STW process.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.841-844
• /
• 2013

본 논문은 동력이 직접 전달되는 휠 허브 모터를 제어 대상으로 소프트웨어를 설계하고 dsPIC30F2010을 이용하는 모터 속도제어기 설계 방법을 제시한다. dsPIC30F2010의 여러 기능 중 내부의 최소 기능인 시스템 클럭, PWM, I/O, Timer 및 통신만을 사용하였고, 각 기능에 대한 동작 특성을 시험하였다. 또한 이러한 기능을 이용하여 PI 속도제어 프로그램을 구현하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.661-662
• /
• 2008

In this paper a novel bearingless switched reluctance motor (BLSRM) with hybrid stator poles is proposed. The operating principle of the proposed motor is presented. Further one prototype motor is designed and manufactured. Compared with existing BLSRM, it has many advantages such as lower number of switches and cost, simpler control algorithm, lower thermal load. Meanwhile through finite element method (FEM) characteristics of the proposed structure such as inductance, torque and radial force can be obtained. According to the FEM results, the above advantages of the proposed structure can be verified.

• 무역상무연구
• /
• 제12권
• /
• pp.349-376
• /
• 1999

The objective of this paper is to identify the problems of Korean inland transportation system and suggest the improvement plan for reducing the export logistics cost. The results are as follows: (1) Expansion of logistics hub facilities : Logistics hub facilities- integrated freight terminal and ICD, etc. can shorten the empty leg and reduce the logistics cost. (2) Design for CVO(Commercial Vehicle Operations) : CVO has various functions that improve the efficiency and effectiveness of freight transportation. (3) Rationalization of freight transportation industry : In particular, the deregulation of the motor freight industry and the privatization of the railway industry induce the competition among their firms and undercut the transportation rates in the long run. (4) Use of third-party logistics : The benefits of TPL are system reliability, improved customer service, and more efficient cost performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2195-2196
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.563-564
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server Fourth one was device solver. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this Property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.