• 제어로봇시스템학회논문지
• /
• 제1권1호
• /
• pp.25-32
• /
• 1995

Nonlinear depth control algorithms for the hovering system of underwater vehicles are presented. In this paper, a nonlinear effect in heave motion for underwater vehicles, a deadzone effect of the flow control valve in the hovering tank and an impact disturbance are considered. In this situation, in order to choose a desirable controller, sliding mode controller and fuzzy sliding mode controller are designed and compared. The computer simulation results show that the fuzzy sliding mode control system is more suitable in order to maintain a desirable depth of an underwater vehicle with a deadzone and impact disturbance.

• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.40-45
• /
• 1997

A robust disturbance rejection controller for the hovering motion of underwater vehicles in near the surface of sea is presented. The suggested controller consists of two control parts, the one is disturbance observer for taking into account the effects of sea wave and missile-launching forces, and the other is sliding mode controller for the robust stability of underwater vehicles with model uncertainties and nonlinearities. It is shown that the sliding mode control system with disturbance observer is more effective compared with the sliding mode control system, especially in case that large sea wave force is affected.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1173-1183
• /
• 2009

스마트 무인기 익형 주위의 유동 구조를 파악하고 이를 바탕으로 synthetic jet을 이용하여 정지 비행 모드에서의 수익하중 감소 여부를 파악하였다. 스마트 무인기의 실제 비행 모드에 대하여 유동 구조를 분석하여 앞전 및 뒷전에서 발생하는 와류에 의해서 수익 하중이 크게 증가함을 밝혔다. 이에 앞전과 뒷전에서 발생하는 유동의 박리를 제어하기 위하여 0.01c, $0.3c_{flap}$, $0.95c_{flap}$ 위치에 jet을 위치시켰다. 또한 무차원 주파수(F+)의 변화에 따른 유동 구조 변화와 항력 감소율을 알아보았다. 그 결과, 와류의 유동 구조를 변화시켜 앞전과 뒷전에서 발생하는 거대한 와류의 박리 주기를 짧게 하고 와류의 크기를 감소시켜 정지 비행 모드에서 수익 하중을 효과적으로 감소시킬 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.43-50
• /
• 2009

In order to reduce the download around Smart UAV(SUAV) at hovering and transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including wing leading and trailing edge separation, and the large region of separated flow beneath the wing. First, in order to control the trailing edge separation, synthetic jet is located at 30, 95% of flap chord length. The flow control using synthetic jet on flap shows that stall characteristics depending on several mode can be improved through separation vortices resizing. Also, a flap jet and a 0.01c jet which control the separation efficiently are applied at the same time at each test case because controlling the leading edge separation is essential for download reduction. As a result, time averaged download is reduced about 18% comparing with no control case at hovering mode and 48% at transition mode. These research results show that if flow control using leading edge jet and trailing edge jet is used effectively to the SUAV in overall flight mode, flight performance and stability can be improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.969-974
• /
• 2004

For a maneuvering unmanned autonomous helicopter, it is necessary to design a proper controller of each flight mode. In this paper, overall helicopter dynamics is derived and hovering model is linearized and transformed into a state equation form. However, since it is difficult to obtain parameters of stability derivatives in the state equation directly, a linear control model is derived by time-domain parametric system identification method with real flight data of the model helicopter. Then, two different controllers - a linear feedback controller with proportional gains and a robust controller - are designed and their performance is compared. Both proposed controllers show outstanding results by computer simulation. These validated controllers can be used to autonomous flight controller of a real unmanned model helicopter.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.563-568
• /
• 1997

본 논문에서는 약간의 가정하에 리모트 제어용 모형 헬리콥터의 동역학방정식을 유도하였으며, 이를 토대로하여 헬리콥터의 자세안정을 위한 제어 알고리듬을 제안하였다. 제어이론으로서는 파라메타의 변화및 외란에 강인한 가변구조 제어이론을 활용하였다. 본 제어 알고리듬에서는 헬리콥터의 위치이동 제어에 대하여서는 다루지를 못하였으며, 단지 헬리콥터의 hovering 상태에서의 자세 안정화에만 촛점을 두어 제어 알고리듬을 제안하였다. 컴퓨터 모사를 통하여, 제안된 제어 제어 알고리듬의 타당성을 보였으며, 약 2-3초의 시간이 경과된 이후 자세가 안정화 됨을 볼 수 있었다.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2004년도 추계학술발표대회 논문집
• /
• pp.279-284
• /
• 2004

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.759-765
• /
• 2016

This paper presents the principle, dynamics modeling and control, hardware implementation, and flight test result of a hybrid-type unmanned aerial vehicle (UAV). The proposed UAV was designed to provide both hovering and fixed-wing type aerodynamic flight modes. The UAV's flight mode transition was achieved through the attitude transformation in pitch axis, which avoids a complex rotor tilt mechanism from a structural and control viewpoint. To achieve this, a different navigation coordinate was introduced that avoids the gimbal lock in pitch singularity point. Attitude and guidance control algorithms were developed for the flight control system. For flight test purposes, a quadrotor attached with a tailless fixed-wing structure was manufactured. An onboard flight control computer was designed to realize the navigation and control algorithms and the UAV's performance was verified through the outdoor flight tests.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.166-170
• /
• 2008

The changing process from hovering mode to transition one is of importance to determine a stability of tilt-rotor aircraft, which is utilized in UAV(Unmaned Aerial Vehicle). The analysis on fluid flows and aerodynamic characteristics according to variation of tilting angle of rotor is essential step in development of tilt-rotor. In the present study, the computation domain is divided into the rotating and stationary regions in order to consider the rotating blades. For the convenient realization of various tilting angle as well as application of boundary condition, the whole computation region is constructed into sphere domain. The near farfield boundary condition is adopted. The airfoil used in computation is NACA 0012. The computation results for the hovering mode are validated by comparing with previously conducted experimental results. From the results, the flow fields around rotor blade and the aerodynamic characteristics in transition mode are observed. The computational result will provide the basis for development and performance evaluation of tilt-type aircraft.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.489-497
• /
• 2010

This paper presents the design of hardware platform, which is a test bed for the navigation system and hovering type AUV (Autonomous Underwater Vehicle) under the OCP (Open Control Platform). The developed AUV test bed consists of two hulls, four thrusters, and the navigation system which uses a SBC2440II with IMU (Inertial Measurement Unit). And the SMC (Sliding Mode Control) is chosen for the diving and steering control of the AUV. This paper uses ACE/TAO RTEC (Real-Time Event Channel) as a middleware platform in order to control and communicate in the developed AUV test bed. In this paper, two computers are used and each of them is dedicated for the specific purpose, the first computer is used as the SMC module and the middleware platform for the ACE/TAO RTEC and the second computer is used for the sensor controller. We analyze the performance of the AUV test bed under the OCP.