• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.10-16
• /
• 2008

Nowaday, The Sustainable Development about global environment is the most important subject. In urban environment, a variety of the nature energy utilization such as the solar energy are the most efficient solution to solve this issue. One of these efficient solutions, a photovoltaic system using sunlight has been introduced to the building with an advantage such as cost-effective, safe for using and good for environment friendly in light with energy utilization. Recently, many of the apartment housings are built in domestic country. The apartment buildings have been constructed since early of 1970's. now apartment is taking over 50% out of entire housing in korea. The apartment housing applying to a photovoltaic system has been extensively studied in the foreign country but our county runs short. So, It was necessary to technical development of PV application which is suitable in Korean house culture. The objective of this study is to develop the building integrated PV application method for apartment building.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.305-311
• /
• 1993

A total of thirty male Holstein calves were reared outdoors with simple housings or in warmed pens in three experiments conducted in three consecutive midwinters in Hokkaido. Average outdoor air temperatures during the experiments were between -5.3 and $-6.1^{\circ}C$, and average minimum air temperatures were between -9.7 and $-10.6^{\circ}C$. The age of calves at the start of the experiments were $16{\pm}6$ hours. There was no difference in the liquid feed intake, while the solid concentrate (artificial milk) intake by the calves in the simple housing systems (outdoors, calf hutch and open shed) tended to be higher than those in the warmed pen. No significant differences in the daily gain or the monthly development of wither height were observed among housing systems. There were no serious cases of diarrhea. However, coughing was observed in several of the calves reared in the poorly ventilated warmed pens.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.391-394
• /
• 2007

Wind turbine gearbox is a complex mechanical system that includes gear trains, shafts, bearings, and gearbox housings. All these components are interacting with each other therefore it is important to assess the whole performance by considering the individual component design. In this paper, the performance assessment of 2MW wind turbine gearbox was conducted under various operating conditions at test bench and test result was compared with the design calculation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.95-98
• /
• 1995

공동주택의 침실, 거실 등은 가족의 휴식처로서 매우 정숙한 환경을 필요로 한다. 최근에 많이 건설되고 있는 고층아파트에는 고속엘리베이터가 설치되고 공간절약 및 구조적 기능 등으로 인하여 엘리베이터통로가 침실이나 거실에 인접한 설계가 많이 채택되고 있다. 이러한 고층아파트의 엘리베이터 기계실 인접 세대에서는 엘리베이터 가동에 의한 공기전달음 및 고체전달음이 문제가 될 수 있으며 특히 암소음이 매우 적은 야간의 엘리베이터 소음은 수면방해 및 집중력저하를 일으켜 입주자들의 불만이 야기될 수 있다. 본 연구에서는 입주완료후 엘리베이터 소음이 문제가 된 아파트에서 소음발생원인을 측정분석하고 주로 문제가 되는 고체전달음을 저감시키기 위한 엘리베이터 방진대책을 실시하여 그 성능을 확인하고 이 대책안을 문제가 되는 기존아파트나 추후 건설될 아파트의 엘리베이터 소음저감대책으로 제시하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.996-1001
• /
• 2000

The sound transmission from the machine room where air-conditioner outdoor unit is located into the adjacent room is predicted and evaluated. The software package for statistical energy analysis(SEA) is utilized to determine the transmission losses of multi-layerd panels. To determine the noise level in the machine room, ray tracing method is adopted. The various sound transmission paths have been effectively identified and evaluated by the SEA tool.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.173-179
• /
• 2003

This study analyzes the problems, which the residential inner area has, and proposes systematic and gradual progressing improvement plan for the residential environment in the inner area. Also, planning instruction is proposed through the case study of parcel·jointed complex housing. This study can be concluded as below: (1) Improvement plans sub-divided into promoting districts and inducing districts of the residential inner area are proposed. (2) Necessity for construction of streets is proposed in order to compensate existing problems in sites. (3) Necessity of complex housings is proposed fur roadsides of household unit or small-sized annexation of parcel. (4) Collecting design examples and existing literatures, the planning guideline for jointed parcel complex housing is proposed based on the established relation with a whole surface of streets, formation and distribution of purposes and increased role of exterior space.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.177-182
• /
• 2004

To cope with the serious housing shortage arising from rapid urbanization and industrialization, residential communities were constructed to meet the growing demand for housing. However, mass construction of these residential communities unavoidably resulted in uniformity standardization. In particular, for high rise apartment blocs using the ground floor as the center of the lower levels housings has raised problem of sunshine, airing, privacy. The research which it sees as the house low evaluation it is coming to become it plans a public facilities on lower levels of the building which keeps the quality which the ground connection and human scale back separates as, to solve the problem point of the lower levels house and the resident collective life which is smooth becomes accomplished.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.181-187
• /
• 2003

This study intends to make a counterproposal for re-building existing high-rise/high-dense buildings and for planlessly re-constructing multi-dwellings. Also, it proposes the plan instruction fur reconstruction by small collective housings through annexing parcels in the residence Inner area. This study can be summarized as below: (1) Remained site generated by site boundaries can be utilized by annexing two or more parcels. (2) Vacant lots between buildings can be utilized as building space or common space by small-sized annexation. (3) Bad effect of residential environment caused by simultaneous development of total blocks can be minimized. (4) Formation of site size and plane, which are advantageous to reconstruction, is available. (5) Accessibility to neighboring roads can increase. (6) Residents' participation in development can increase in economical and planning aspect. In order to utilize these planning instruction, residents' participation and improved public ownership system for parcel annexation are required.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.198-205
• /
• 2003

In this multi-cultural era, the cultural identity of each nation has appeared as a major issue, and needs to clearly define it through comparisons with other cultures have been raised. This research aims to analyze characteristics of traditional furniture of Korea and China according to residential culture and to find out their similarities and dissimilarities. ‘Banga’ in Korea ‘Sahapwon’ in China in the same era were selected for the comparison for traditional furniture between Korea and China. In the part of comparative analysis, characteristics of the furnitures are summerized based on classification into spatial system of housings and types of furniture. After that, traditional residential cultural differences between two countries that reflected on characteristics of furniture are distinguished and compared. The result of analysis is expected to act a part role of defining the cultural identity of Korea.

• Architectural research
• /
• v.17 no.2
• /
• pp.75-81
• /
• 2015

Insulation and condensation performance evaluation (I&CPE) is an important energy analysis. While considerable amount of data are already represented in a Building Information Model (BIM), the lack of interoperability between BIM modeling and I&CPE programs prevents the simulation process from being efficient and accurate. This study proposes a prototype of a BIM-based I&CPE simulation program, in order to enhance the interoperability between BIM modeling and I&CPE programs. This study discusses the information flow process, defines the required information and its level of detail, develops standardized libraries, and finally proposes a prototype that consists of a data extraction module, conversion module, and performance module. The assurance of interoperability between systems might greatly benefit architects and energy professionals.