• 제목/요약/키워드: Housing Development

검색결과 2,045건 처리시간 0.03초

이동위성 통신용 광대역 2단 전력제어 HPA의 구현 및 성능평가에 관한 연구 (A Study on Fabrication and Performance Evaluation of Wideband 2-Mode HPA for the Satellite Mobile Communications System)

  • 전중성;김동일;배정철
    • 한국정보통신학회논문지
    • /
    • 제3권3호
    • /
    • pp.517-531
    • /
    • 1999
  • 본 논문에서는 INMARSAT-M형 송신기에 사용되는 L-BAND(1626.5-1646.5 MHz)용 2단 가변이득 전력 증폭기를 연구 개발하였다. 2단 가변이득 전력증폭기는 구동증폭단과 전력증폭단에 의해 고출력 모드일 때 +42 dBm, 저출력 모드일 때는 +36 dBm의 전력으로 증폭되며, 각각에 대해 상한 +1 dBm과 하한 -2 dBm의 오차를 허용한다. 제작의 간편성 때문에 전체 2단 가변이득 전력증폭기를 크게 구동증폭단과 전력증폭단 두 부분으로 나누어 구현하였으며, 전력증폭부를 구동하기 위한 구동단은 HP사의 MGA-64135와 Motorola사의 MRF-6401을 사용하였으며, 전력증폭단은 ERICSSON사의 PTE-10114와 PTF-10021을 사용하여 RF부, 온도보상회로 및 출력 조절회로를 함께 집적화 하였다. 이득조절은 구동증폭단의 MGA-64135의 바이어스 전압을 조절하는 방법을 제시하였으며, 실험 결과와 잘 일치하였다. 제작된 2단 가변이득 전력증폭기는 20 MHz대역폭 내에서 소신호 이득이 42 dB와 36 dB 이상, 입ㆍ출력 정재파비는 1.5:1 이하, 5 dBm의 $P_{1dB}$. $P_{ldB}$출력레벨에서 3 dB Back off 시켰을 때 32.5 dBc의 I $M_3$를 얻었다. 1636.5 MHz 주파수에 대해 출력전력은 43 dBm과 37 dBm으로서 설계시 목표로 했던 최대 출력전력 20 Watt를 얻었다.다.다.

  • PDF

기술경영 연구 분야의 연구 분류체계 제시에 관한 연구 - 연구 설계와 연구 방법론을 중심으로 - (Development of a Classification Scheme for Management of Technology Research - Approach on Research Designs and Methodologies -)

  • 이동걸;이희상;윤인환
    • 경영과정보연구
    • /
    • 제35권4호
    • /
    • pp.269-287
    • /
    • 2016
  • 본 연구는 기술경영 연구 분야의 국내외 대표 학술지에 게재된 연구들을 토대로 연구 설계와 연구 방법론의 현황과 새로운 연구 분류체계를 제시하는데 그 목적이 있다. 본 연구의 목적을 달성하기 위하여 기술혁신학회지를 비롯한 기술경영 연구 분야의 국내 대표 학술지 2개와 상위 11개 국제 학술지에 2006년부터 2012년까지 수록된 696편의 연구 논문을 수집한 후 내용분석(contents analysis)을 실시하였다. 분석 결과, 정성적 개념 연구, 정성적 실증 연구, 정량적 개념 연구, 정량적 실증 연구 등의 연구 설계 내에 총 8가지의 상세 연구방법론을 분류하였으며, 다음과 같이 국내외 연구자 및 학술지, 국내 대표 학술지 간 특징을 바탕으로 기술경영 연구 분야의 동향을 확인하였다. 첫째, 국내외 기술경영 연구자 및 학술지 간 연구 설계와 연구 방법론의 추세는 실증 연구 설계에 편중된 유사한 동향을 보이고 있는 반면, 해외 연구에서 이론 연구 설계의 비율은 국내 연구보다 높게 나타났다. 둘째, 기술혁신학회지에는 정성적 실증 연구 설계와 기록 연구 방법이 더 많이 발표된 것에 반해, 기술혁신연구에는 정량적 실증 연구 설계와 개념 연구 설계의 비율이 높았다. 본 연구결과는 기술경영 연구 분야에서 연구 설계와 연구 방법론에 대한 동향과 새로운 연구 분류체계를 제시함으로써 구체적이고 체계적인 연구 접근법에 대한 방향성을 제공할 뿐만 아니라 후속 연구자들이 연구 목적에 적합한 연구 설계와 연구 방법론을 선택하는데 도움을 줄 수 있을 것으로 기대된다.

  • PDF

The Method of Evaluating The Potential for Conversion Legal Problems with Conversion And Basic Capacity of Vacant Onces in Tokyo

  • Sato, Kouichi;Matsumura, Shuichi;Namiki, Kenji
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2002년도 추계학술발표대회
    • /
    • pp.301-306
    • /
    • 2002
  • In Japan, the vacancy rates of office buildings have been at high in big cities since 1992. This problem is especially acute in Tokyo, where it is estimated that over 2.27 million square meters of office floor area will be oversupplied in 2003: big urban redevelopment projects will be completed in 2003. Under these circumstances, International Cooperative Research and Development on Sustainable Urban Management by Conversion of Buildings, called “SUMCOB”, has been carried out. This research aims to regenerate urban areas by converting redundant offices into flats, although instances of conversion are still very few in Japan. This paper introduces part of current results by SUMCOB, and discusses legal problems with conversion and basic capacity of vacant offices in Tokyo. It has been confirmed that there are no constraints concerned with Real Estate Registration Law (although it requires the change of the registration after conversion). and City Planning Law. However, some criteria are incompatible with Building Standard Law and Fire Service Law if the use of the building is changed from offices to flats. Typical incompatibility between offices and flats is lightening. If the buildings do not satisfy criteria for flats, the cost of renovation works for conversion will increase. To examine the basic capacity of vacant office buildings for conversion, field surveys in Tokyo have carried out at three areas: Kodenmacho (Chuo-ku), Toranomon (Minato-ku), and Iwamonocho (Chiyoda-ku). They are typical office areas that are included in center core of Tokyo. In Chuo-ku, the oldest commercial area in Tokyo, textile merchants have been located their headquarters. In Minato-ku, many rental office buildings have been located and several large scale redevelopments are advancing. Chiyoda-ku includes Marunouchi area, which is the prime office area in Japan. Thirty percent of the buildings in survey areas suffer from over twenty percent vacant floor rate, and fifty five percent were constructed before 1990. Especially most of buildings over forty percent vacant floor rate were constructed in 1980s. Vacant office problems haven't been seen in old buildings in Tokyo yet. The number of dwelling units made from office space will influence the conversion scheme. Seventy percent of the office buildings in survey areas have floor area of less than two hundred square meters. If they have been subdivided into two bedrooms type or three bedrooms type, the number of dwelling units in a floor would be less than three. The difficulty of conversion planning derives from frontage size, depth size, and their proportion. The five categories are proposed to grasp actual requirements for converting offices into flats.

  • PDF

아파트 브랜드 이미지가 입주만족도에 미치는 영향 분석 (A Study on the Influence of Apartment Brand Image on Occupancy Satisfaction)

  • 김동일;강희삼
    • 한국융합학회논문지
    • /
    • 제9권3호
    • /
    • pp.241-247
    • /
    • 2018
  • 본 연구는 최근 다양한 주거환경과 거주에 따라 생활양식이 변화되고 있는 시점에서 정형화된주거 형태의 보급과 공급에 의존하는 수동적 주거선택의 조건에서 소비자의 선택적 가치가 브랜드가치와 연관성이 있는지를 확인하고자 하였다. 즉, 주거형태에 따라 구매의도와 구매 결정에 영향을 주고 있는 브랜드와 입주만족간의 영향관계를 분석하였다. 본 연구를 수행하기 위해 주거관련 선행연구를 종합하고 입주만족도에 대한 이론적 연구를 통해 연구모델을 개발하고 연구가설을 설정하여 입주만족도의 주요 요인을 분석하였다. 본 연구 결과는 첫째 브랜드 가치와 입주만족도와의 관계에 있어서는 통계적으로 유의성이 높게 나타났으며, 둘째 주거형태와의 관계에 있어서는 유의한 결과를 얻을 수 있었다. 또한 매개변수로 작용하고 있는 경제적 가치와의 관계에 있어서는 어느 정도 유의한 것으로 분석되었다. 따라서 본 연구는 아파트 공급자와 수요자와의 관계에 보다 구체적이고 유용한 정보를 제공할 수 있을 뿐만 아니라 유사 연구에 기초적인 정보를 제공할 수 있을 것으로 기대된다. 그러나 통제변수의 선정과 분석적 오차 등의 한계로 향후 연구에서는 보다 종합적이고 타당한 지표개발을 통해 연구가 진행되어야 할 것이다.

한국형 완전이식 인공심장의 개발 (Development of a Korean Type Totally Implantable TAH)

  • 민병구;최원우;안재목;박성근;박찬영;장준근;김종원;김희찬;김원곤;노준량
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.199-202
    • /
    • 1996
  • Artificial hearts are intended for use in patients with severe forms of heart disease for which no surgical repair is possible. The moving-actuator pump was developed to decrease the overall volume size of the electromechanical total artificial heart (TAH) by eliminating the occupied space of the fixed-actuator in the conventional pusher-plate type pump. In our pump, the actuator moves back and forth for alternative ejections of left and right ventricles. The problem of fitting the TAH to atrial remnants and arterial vessels could also be improved by circular or penduluous mot ion of the actuator instead of linear mot ion of the pusher-plate in the conventional pumps. We have evaluated two types of moving- actuator pump; one is a rolling cylinder type, and the other a pendulum type pump. In the rolling cylinder pump, frictional energy loss exists between the pump housing's guide bars and the actuator's end caps, while the bottom rack under the cylindrical actuator increases the height of the pump, the pump is therefor not implantable inside the small chest of human-sized animals with a body weight of less than 70kg. The new human type pump has a penduluous mot ion actuator to correct the above problems while maintaining the advantage of the moving- actuator's small total volume. The totally implantable TAH is composed of a blood pump, a control system and pheriperal equipments. The blood pump, which is constructed by a moving actuator, a right and left blood sac, and four artificial valves, is implanted in the thoracic. In 1988, the first implantation of the rolling cylinder TAH was performed into a female calf weighing 100kg, and the cal f recovered to the degree of voluntary standing and eat ing and survived to 100 hrs. We then survived two female sheep weighing about 63kg with the new human type TAH for three days.

  • PDF

대단면 스킨팀버의 휨 성질에 관한 연구 (A study on the Bending Property of Structural Size Skin-Timber)

  • 김광철
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권1호
    • /
    • pp.26-37
    • /
    • 2012
  • 최근 들어 한옥에 대한 수요과 공급이 계속해서 늘고 있다. 이러한 한옥이 가지고 있는 가장 심각한 문제는 과도한 지붕구조의 무게와 이로 인해 늘어날 수밖에 없는 구조부재의 대형화이다. 따라서 겉으로는 대단면 목재 부재이면서 다량의 목질부를 제거하여 무게의 경량화를 이루고 감소하는 강도적 성질은 부재의 하이브리드화를 통해 보충할 수 있는 실대재 대단면 스킨팀버를 제작하였다. 소나무와 낙엽송 두 수종을 사용하여 실대재 스킨팀버를 제작하였다. 두 수종에 대해 정각형 스킨팀버와 원통형 스킨팀버 각각을 제작하여 휨성능을 평가하였다. 가공기계의 정밀도 부족으로 인해 부재에 과도한 손상이 발생하여 의도한 정도의 강도적 성질을 얻지 못하였다. 하지만 가공기계의 정밀도 향상을 도모하고 추가적인 하이브리드 구조체 제작을 첨가한다면 경량의 대단면 구조부재의 생산이 가능할 것으로 판단된다. 본 연구에서 실제 제작한 낙엽송과 소나무 실대재 스킨팀버에서는 수종간의 휨성능 차이는 나타나지 않아 적절히 혼용 가능한 것으로 나타났다. 낙엽송의 MOR 기준에서만 정각형과 원통형간에 성능 차이가 인정되어 구분하여 사용해야 할 필요가 있고 나머지에 있어서는 차이가 인정되지 않아 혼용이 가능하다고 판단되었다. 본 연구의 목적이 어느 정도의 강도를 지닌 경량의 대단면 구조재 개발에 있으므로 목질계 우드세라믹이나 경량철골 등을 이용한 하이브리드 구조체를 개발한다면 한옥이나 실내인테리어재료 그리고 기둥-보 공법의 재료 등으로 활용 가능할 것이다.

건축물 내외부의 친환경 구성을 위한 입체녹화의 부문별 디자인 적용요소에 관한 연구 (A Study on the Application of Design Components of 3D Greenery System for Eco-Friendly Indoor and Outdoor Space of Buildings)

  • 신경선;김원필
    • 한국산학기술학회논문지
    • /
    • 제18권4호
    • /
    • pp.275-284
    • /
    • 2017
  • 입체녹화가 도시환경을 향상시키는 효과가 있는 것으로 알려지면서 친환경 건축물의 새로운 대안으로 부각되고 국내적용에 대한 다양한 연구가 필요해지고 있다. 본 연구의 목적은 국내외 건축물 준공사례를 대상으로 건축물 내 외부에 반영되고 있는 입체녹화의 공간특성을 조사하고 구성체계 및 디자인요소를 분석하여 친환경구성을 위한 부문별 디자인 적용요소의 발전방향을 제시하는 데 있다. 분석결과, 입체녹화는 건축물 내 다양한 외부공간을 증가시키기 위하여 대형화하는 고밀도 개발형태를 보이며 초기에는 전시, 교육 등 공공시설이 많았으나 최근에는 공동주택 사례가 증가하고 있다. 공동주거 Unit에 다양한 근접공간을 도입하고 사적 공간에서 독립적인 녹화공간을 제시하는 등 거주자의 선호조건에 따라 선택적으로 근접공간을 이용하도록 계획하는 방법은 일률적인 국내 공동주거의 디자인을 지양하고 거주자의 다양한 행위를 유도할 수 있다. 새로운 공간분위기와 다양한 옥외공간으로 인한 커뮤니티 장소들은 사회적 상호 작용을 통해 공동주거의 생활패턴을 변화시키고 새로운 마을공동체를 조성하는 방법이 될 것으로 판단된다. 또한 대지의 환경특성을 적극적으로 반영하고 건축물 형태에 자연지형과 경사로를 이용하는 경향을 뚜렷이 보이고 있어 외부공간 환경조성 디자인요소에 대한 후속 연구도 필요하다.

중학생을 위한 통일대비 가정생활문화교육 프로그램 개발과 평가 (Development and Evaluation of the Educational Program for South Korean Middle School Students in Preparation for Reunification on North Korean Family Living Culture)

  • 이하나;김유경;송지은;안순희;이연숙;이예영;이윤정;임정하;정민영;정순화;한영선
    • 한국가정과교육학회지
    • /
    • 제29권3호
    • /
    • pp.105-124
    • /
    • 2017
  • 본 연구는 통일 한국에 대비하여 통일 후 대한민국의 주축으로 성장할 청소년들을 대상으로 북한의 가정생활문화에 대한 이해를 돕기 위한 교육 프로그램을 개발하는 것을 목적으로 하였다. 이를 위하여 현행 교육과정에서 이루어지는 통일교육과 가정생활문화에 해당하는 선행연구를 고찰하고 이를 근거로 교육 내용을 선정하였다. 교육은 2015년 12월 사이에 서울시내 남녀공학 중학교 1학년 두 개 학급을 대상으로 시행되었다. 교육 내용은 가정교과의 세부 내용학을 중심으로 실생활과 밀접한 식생활, 의생활, 주생활, 가족생활 및 대인관계, 소비생활 및 여가 등의 주제로 12차시 분량으로 준비되었다. 사전-사후 평가에서 소비생활, 여가생활, 아동 가족생활, 식생활, 의생활, 주생활의 모든 분야에서 유의한 효과가 있었다. 또한 학생들의 구술 응답에서도 프로그램의 내용이 실생활에 도움이 될 것이라 하였으며 학기 중에도 이와 같은 교육프로그램이 개설될 것을 희망하였다. 이 프로그램은 남한의 청소년들에게 북한의 가정생활문화의 이해를 도움으로써 앞으로 다가올 미래의 통일한국을 대비 하도록 하는 통일교육 프로그램의 역할을 할 것으로 기대된다.

우리나라의 각종 출산력지표에 의한 출산력 추이에 관한 분석 (An Anaysis on the Change of Fertility Rates According to Various Fertility Indices in Korea)

  • 이준협
    • 한국인구학
    • /
    • 제9권2호
    • /
    • pp.67-78
    • /
    • 1986
  • With Economic Development Plan, the Korean National Family Plan Program was introduced in early 1960's. The program, which has been a way for constraining population increase, has obtained excellent results. In other word, it has had an important role in controlling the increase in population. The purpose of this study is to analyze the change of fertility rates since 1970 and the lever of completed fertility of Korean women since 1960. There are Age-specific Fertility Rate(ASFR), Total Fertility Rate(TFR), Gross Reproduction Rate(GRR) and Net Reproduction Rate(NRR) etc. in indices of period fertility. It is also possible to be seen the completed fertility rates by using Parity Progression Ratio. The data necessary for this study were obtained from Population & Housing Census Report from the year of 1960 to 1980 and Vital Statistics from 1980 to 1984, which conducted by Economic Planning Board, Republic of Korea. The summarized results of this study were as follows : 1. Age-specific Fertility Fertility Rate(ASFR) has been continuously decreasing till now. The ASFR for the women aged 25 to 29 was higher than those of any other groups and the ASFR for the women aged 20 to 24 was higher than that of the women aged 30 to 34 since the mid 1970's. 2. There are Total Fertility Rate(TFR), Gross Reproduction Rate(GRR) and Ney Reproduction Rate(NRR) etc. in reproduction rates. First of all, TFR and GRR have been declining except late of 1970's and TFR showed 2.23 per ever-married women, GRR was 1.05 in 1982. Next, the change of NRR could not be found without life table by year and only NRR for the time of census was to be found. In 1980, NRR showed 1.27 per ever-married women and the level was still out of reach at replacement level of population. 3. Specific Fertility Rate by Birth Order(SFRBO) showed to be declined continually since 1972. Especially the SFRBO of the third live birth was decreased from about 22 per 1,000 ever-married women in 1972 to 12 or so in 1982. 4. To know the level of completed fertility, the mean number of completed live births per ever-married women was calculated from 1960 to 1980. The number of completed live births was more than 5 per ever-married women by the year of 1975 but have been declining and resulted in 4.69 in 1980.

  • PDF

한국과 중국의 BIM 수용영향요인 비교분석 (Comparative Analysis of BIM Acceptance Factors between Korea and China)

  • 송경욱;이슬기;유정호
    • 한국건설관리학회논문집
    • /
    • 제22권6호
    • /
    • pp.3-14
    • /
    • 2021
  • 중국건설업에서는 BIM (Building Information Modeling)의 활용을 통해 건설업의 비효율적인 상호운용성의 문제를 해결하여 건설업의 총생산액 증가시키고자 한다. 하지만 중국 주건부에서 2011년부터 건설업의 BIM활용을 촉진하였음에도 불구하고 중국에서는 BIM 활용률은 45% 미만인 것으로 나타났다. 한편 한국 건설업은 중국보다 먼저 BIM 도입을 하여 활용하고 있는 만큼, BIM 활용수준과 BIM 수용의지가 중국보다 높을 것으로 예상된다. 따라서 본 연구에서는 한국과 중국의 BIM수용영향요인 비교분석을 통해 중국의 BIM 활용률을 향상시킬 수 있는 방안을 제안하고자 한다. 한국과 중국의 BIM수용영향요인 비교분석을 위해 기술수용이론(Technology Acceptance Model; TAM)과 BIM 수용모델 관련 선행연구고찰을 통해 BIM 수용영향요인을 분류하고, 중국의 국가적 특성과 중국건설업만이 가진 특성을 반영한 BIM 수용영향요인을 추가하여 실제 BIM 사용자인 한국과 중국 건설사업 참여주체(시공사, 설계사, CM)를 대상으로 설문조사를 실시하였으며, 통계값을 유의미한 차이를 알아보기 위해 SPSS 22.00을 활용하여 t-test 실시하였다. 마지막으로 t-test 결과를 기반으로 중국의 BIM 활용률을 향상시킬 수 있는 개선방안을 제안하였다. 본 연구의 결과를 통해 중국 건설업에 적합한 BIM 활용 활성화 방향을 제시하고, 중국 건설업의 BIM 활용 활성화 연구의 이론적 기초를 제공할 수 있을 것으로 기대한다.