• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• The Korean Journal of Pain
• /
• v.18 no.2
• /
• pp.165-170
• /
• 2005

Background: It is difficult to treat tourniquet-induced hypertension despite adequate anesthesia, and the mechanism of that is not known. And it may be possible that intraoperative continuous infusion of opioid induces preemptive analgesia postoperatively. We investigated the effect of intraoperative continuous i.v. fentanyl on tourniquet induced cardiovascular changes and postoperative preemptive analgesia in total knee replacements. Methods: Sixty patients were randomly assigned to two groups; In study group ($1.5{\mu}g/kg$ loading and $0.5{\mu}g/kg/hr$ continuous infusion of fentanyl before skin incision and tourniquet inflation) and control group (no treatment). Anesthesia was maintained with enflurane (1-2 MAC) and 50% nitrous oxide in oxygen. Arterial pressure and heart rate were compared between two groups. They received postoperative pain treatment with patient-controlled analgesia (PCA) with fentanyl during the postoperative 48 hours after total knee replacement. Visual analog scale (VAS) scores at either rest or movement were used to assess pain. Total fentanyl dose delivered, number of PCA requests, supplemental analgesics, overall satisfaction score and adverse events were evaluated. Results: There were no significant differences between the two groups on cardiovascular changes by tourniquet induced pain effect. VAS, PCA delivered dose and PCA demands at movement in the 24-48 hour decreased in study group compared with control group (P < 0.05). But there were no significant differences between the two groups on the other time periods except 24-48 hour's patient satisfaction and adverse events. Conclusions: We suggest that intraoperative continuous i.v. fentanyl infusion dose not affect cardiovascular change by tourniquet induced pain. But it may induce preemptive analgesia postoperatively.

• Journal of Korean Clinical Nursing Research
• /
• v.15 no.1
• /
• pp.19-28
• /
• 2009

Purpose: The purpose of this study was to examine the effect of position change on discomfort and bleeding in patients undergone coronary angiography with a vascular device and required bed-rest. Method: This study utilized nonequivalent control group non-synchronized design. Data were collected from 118 inpatients after coronary angiography and stayed in general ward at Y hospital in Seoul, from June 5 to August 12, 2008. After coronary angiography, position change was performed to the experimental group who consisted of 59 patients. They stayed in supine position just after angiography and then head-up position with 15 degrees was applied 1 hour later. After that, they could change the position alternatively into lateral position with leg down and supine position. The control group was positioned keeping the affected leg immobile with supine position for 4 hours. Results: The experimental group reported significantly more comfortable than control group after position change. There were no significant differences in the grades of bleeding or hematoma at puncture site between the two groups. Conclusion: The position change in patients undergone angiography could be applied without any harm such as bleeding or hematoma, but effective in reducing back pain and subjective patients' discomforts.

• Korean Journal of Poultry Science
• /
• v.30 no.3
• /
• pp.203-209
• /
• 2003

This experiment was conducted to investigate the influence of dietary supplementation of two different types of multiple probiotics in broiler chicks. Four hundred one day old male broiler chicks(Ross ${\times}$ Ross) were raised in the floor pen with five treatments(0, A: 0.10, 0.20%, B: 0.10, 0.20% of probiotics), consisting of 5 replicates for 5 weeks. Weight gain, feed intake and feed conversion were measured weekly, Total Lactobacillus, yeast, E. coli, Salmonella were examined from ileum and cecum at the end of experiment. Sera protein, cholesterol and ND vaccine titer were measured and fecal COD, CO$_2$ and NH$_3$ were detected in 24 hours after collection. Weight gain of chickes fed both types of probiotics increased for the first three weeks and showed significantly higher for the rest two weeks. Feed intake tended to be high in probiotics treatments compared with contro(P<0.05)1. Feed conversion improved significantly in B types of 0.2% probiotics compared with control. Total number of Salmonella was not consistent in ileum among treatments, whereas E. coli tended to be decreased in both types of probiotics compared with control. NH$_3$ and CO$_2$ emission of feces were decreased in both types of probiotics, but it was not statistically different(p>0.05). COD of chicks fed both probiotics was lower than control. There were no significantly different breast meat(P>0.05). Total cholesterol decreased in probiotics groups regardless of it's type. ND antibody vaccine titer was prone to be a small increments.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.247-254
• /
• 2022

To investigate the tolerance limit and critical thermal maximum (CTM), behavioral responses of wild goldeye rockfish Sebastes thompsoni according to exposure to high water temperature were observed using a continuous behavior tracking system. As a result, behavioral index (BI) of S. thompsoni in each temperature (20.0, 25.0, and 30.0℃) showed a significant difference (p<0.05) when compared with the value measured in a stable condition of 15.0℃. The activity level of S. thompsoni exposed to 25.0℃ decreased sharply after 20 hours. Their rest time at the bottom of experiment chamber increased, and their normal swimming and metabolic activities were disturbed. In addition, at a high water temperature of 30.0℃, S. thompsoni reached the limit of resistance and showed a sub-lethal reaction of swimming behavior, with energy consumption in the body increased and all test organisms died. In conclusion, the eco-physiological response of S. thompsoni to water temperature varied greatly depending on the fluctuation range of the exposed temperature and the exposure time. In addition, the tolerance limit of S. thompsoni to high water temperature was predicted to be 25.0-30.0℃. The maximum critical thermal that had a great influence on the survival of this species was found to be around 30.0℃.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.4
• /
• pp.45-53
• /
• 2009

This study concerned remediation of heavy metal contaminated farmland soils near abandoned mine, using stabilization method, with particular emphasis on the remediating the soils contaminated with multi-elements. In this study, stabilizing heavy metals based on 'In-situ chemical fixation' has been applied to the soil collected from an abandoned mine in Korea, using column test, with various stabilizing agents, including $FeSO_4$, $KMnO_4$, sludge (collected from coal mine drainage treatment pond), zero-valent iron (ZVI), zeolite and $CaCO_3$. Sixty five-days operation of the flow-through columns yield $FeSO_4\;+\;KMnO_4$ and zeolite are efficient on reducing As leaching from the soil. ZVI and sludge are reducing the leaching of Cu. Although $FeSO_4\;+\;KMnO_4$ seem to be efficient for most heavy metals, high pH in the initial stage of test enabled high leaching of the heavy metals, whereas fixation of the heavy metals maintain throughout the rest of the test period, with increasing pH up to around 6. Addition of some alkaline agent may inhibit the low pH during the application. The column test was also run as two set: one set incubated with deionized water for 72 hours prior to starting the test, and the other without incubation. The incubated set demonstrated better stabilizing efficiency, indicating the potential optimized operation method.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.307-313
• /
• 2003

Japanese pine sawyer, Monochamus alternatus, is a primary vector of pinewood nematode, Bursaphelenchus xylophilus in Korea. Emergence characteristics of the adults were studied in Jinju, Korea using dead pine logs in which the larvae of the sawyer overwintered from 1999 to 2002. Emergence data showed that the adults began to emerge out of the logs in sunny place from May the 15th in average of the four years. Cumulative emergence ratio (CER) reached at 50% at mid-June, and the emergence terminated by early or late July depending on years. In shady place, however,50% CER was reached 17 days later than in sunny place. The 50％ CER of males reached 1 to 4 days earlier than that of females depending on years. Of the adults emerged from the logs collected from February to April in 2001, 97.6％ was univoltine, and the rest was biennial which emerged from May to July of the next year. Female and male adults emerged throughout 24 hours; 32.3% of the total adults emerged from 8 to 12 a.m. It took 68.0 seconds for the adults to escape from pine logs.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.262-267
• /
• 2005

In order to commercialize Paenibacillus sp. AC-1 and to minimize its harmful side effects, four granular formulations were prepared using AC-1 powder, adjuvant, and carrier and then their physicochemical properties of the formulations were investigated. Out of the carriers tested, the best one was talc for the formulation. Viable cells was stabilized during the formulating process. Viable cells in the granules formulated with Paenibacillus sp. AC-1 powder were stabilized at storage temperature range ($4{\sim}50^{\circ}C$) after 12 weeks. The release rate of viable cells from granules into water under a static condition were eluted over 90% in 7 hours and breakdown rates of particle were 100% in 1 day. Among the tested formulations, granular formulation comprising of 20% of Paenibacillus sp. AC-1 powder, 7% of polycarboxylate as surface active agent, 1% of sodium polyacrylate as adjuvant, the rest as carrier showed to be best.

• Journal of Chitin and Chitosan
• /
• v.23 no.4
• /
• pp.285-292
• /
• 2018

In this study, for the purpose of decomposing food waste, the strain was screened from traditional fermented food and soils. The enzyme activity (protease, amylase, cellulase, lipase) experiment was carried out using the paper disc method in 212 strains isolated from 5% NaCl media. Among them, only the strains having enzyme activity of more than 2 (soil) or more than 4 (traditional fermented food) with the halozone of enzyme activity of 15 mm or more were selected first, and microorganism identification through 16S rRNA sequencing was performed. Finally, were identified such as Bacillus subtilis, Bacillus amyloliquefaciens, Bacillus siamensis, Bacillus licheniformis, Bacillus aquimaris, Bacillus megaterium, Bacillus koreensis, Bacillus stratoshericus, Bacillus aryabhattai, Bacillus safensis, Marinobacter hydrocarbonoclasticus. 11 species of mixed strains were confirmed that the culture time was 24 hours, the incubation temperature was $30^{\circ}C$ and the optimum pH was 7.0. In order to confirm the degree of decomposition of standard food wastes (100 g) by treating 11 kinds of mixed strains (25%), solid content of more than $2000{\mu}m$ was determined to be 103 g for the sterilized water group and 18 g for the mixed strains group. And the rest was decomposed to a size of less than $2000{\mu}m$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.348-351
• /
• 2006

Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.