• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.123-128
• /
• 2012

Computer simulation of buildings and solar energy systems is being used increasingly in energy assessments and design. The purpose of our work is to predict the surface temperature on inclined surfaces based on ISO-TRY typical weather data. To reach this goal, three studies were performed. They consisted of quantifying the accuracy of various well-known three models. The first type of models calculated diffuse horizontal irradiations from global ones and the second type models computed global irradiations on inclined planes from diffuse and global components on a horizontal surface. The third type of model calculated long-wave radiation and surface temperature from ISO-TRY typical weather data. The proposed model can provide an alternative to building designers in estimating the surface temperature and solar irradiation on inclined surfaces where only the typical meteorological data are available.

• 한국농림기상학회지
• /
• 제19권3호
• /
• pp.75-85
• /
• 2017

청명미풍 조건에서 기온역전층 높이와 기온역전강도의 매시 변화를 정량적인 경험식으로 나타내어 야간의 매시 기온을 추정하는 방법을 고안하였다. 2007년 5월부터 2008년 3월까지 강원도 평창군 대관령면 고령지농업연구소에서 초단파 온도 프로파일러 (Model MTP5H)로 지면으로부터 높이 600m까지 50m 간격의 기온 연직 분포를 한 시간 간격으로 측정하였다. 연직기온에서 가장 기온이 높은 고도를 기온역전층 높이로, 역전층의 기온과 지면 위 100m의 기온 편차를 역전강도로 간주하고 야간 동안 시간에 따라 기온 역전층이 발달되는 정도를 모의하는 추정식을 작성하였다. 산사면에서 작물이 실제 경험하는 기온을 추정하기 위해 2014년 10월부터 2015년 11월 23일까지 전남 구례군과 광양시 사이의 중대리 계곡에서 사면의 고도별 기온을 수집하여 연직기온의 역전층 높이 및 역전강도 추정모수를 보정하였다. 지리산 남쪽의 집수역 3개 내에 구축된 검증관측망으로부터 2015년 한 해 동안의 기상자료를 수집하였고, 기상청 방재 및 종관기상관측망으로부터 배경기온을 제작, 기온감률과 함께 기온역전 조건하의 매시 기온을 추정한 다음 검증을 실시하였다. 그 결과, 청명미풍 조건에 대해 19지점 평균 ME $-0.69^{\circ}C$, 평균 RMSE $1.61^{\circ}C$이었고 2000-0100 시간대에서 과소추정오차가 증가되었다. 기존에 사용되어 왔던 최저기온 모형으로 0600 기온을 추정하고 새로운 모의 방법으로 산출된 결과와 추정 오차를 비교한 결과, 평균 ME는 기존 $-0.86^{\circ}C$에서 $-0.12^{\circ}C$로, 평균 RMSE는 $1.72^{\circ}C$에서 $1.34^{\circ}C$로 개선되었다. 청명미풍 조건에서 도출된 기온 추정식의 활용도를 높이기 위해서는 추정 오차를 개선하고 다양한 기상조건에 대한 영향을 반영하는 후속 연구가 필요하다.

• 한국환경과학회지
• /
• 제21권8호
• /
• pp.953-963
• /
• 2012

The annual variations of the urban heat island in Busan is investigated using surface temperature data measured at 3 automatic weather stations(AWSs) for the 5 years period, 2006 to 2010. Similar to previous studies, the intensity of the urban heat island is calculated using the temperature difference between downtown(Busanjin, Dongnae) and suburb(Gijang). The maximum hourly mean urban heat island are $1.4^{\circ}C$ at Busanjin site, 2300LST and $1.6^{\circ}C$ at Dongnae site, 2100LST. It occurs more often at Dongnae than Busanjin. Also the maximum hourly mean urban heat island appears in November at both sites. The urban heat island in Busan is stronger in the nighttime than in the daytime and decreases with increasing wind speed, but it is least developed in summer. Also it partly causes the increasement of nighttime PM10 concentration.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.639-645
• /
• 1998

A Jump model was evaluated for the calculation of hourly mixing height and mean potential temperature within the height. The Sump model was modified for estimation of downward heat fluxes by mechanical convections and surface heat fluxes. The surface heat fluxes were estimated from routine weather data such as solar radiation and air temperature. Total of 8 upper-air data observed at 0000UTC and 0600UTC in Osan station during April 23 to 26, 1996 were analyzed, and compared to the model results in detail. The calculated mixing heights and potential temperatures within the height were comparable to the observations, but some differences were showed. The calculated mixing heights were generally higher than observations. And, when variations of wind directions were large, the large difference of potential temperature was occurred. From the results, it was important to note that vortical motions and advections of air masses would affect to the growth of the mixing height.

• 대한원격탐사학회지
• /
• 제19권5호
• /
• pp.341-349
• /
• 2003

The so-called B-method, a simplified surface energy budget, permits calculation of daily actual evapotranspiration (ET) using remotely sensed data, such as NOAA-AVHRR. Even if the use of satellite data allows estimation of the albedo and surface temperature, this model requires meteorological data measured at ground-level to obtain the other inputs. In addition, a difficulty may be occurred by the difference of temporal scales between the net radiation in daily scale and instantaneous measurement at midday of the surface and air temperatures because the data covered whole day are necessary to obtain accumulated daily net radiation. In order to solve these problems, this study attempted a modification of B-method through an extension of hourly ET value calculated using a complete instantaneous inputs. The estimation of the daily apparent ET from newly proposed system showed a root mean square error of 0.26 mm/day as compared the output obtained from the classical model. It is evident that this may offer more rapid estimation and reduced data volume.

• 한국환경과학회지
• /
• 제24권10호
• /
• pp.1265-1272
• /
• 2015

To investigate the thermal environment over the summertime asphalt pavements, an automatic weather observation system was installed at a parking lot paved with asphalt to observe various meteorological parameters and surface temperature from July 1 to September 30, 2014. Since the number of rainy days in summer of 2014 particularly after the mid July is more than that of average data, a ratio of daily peak surface temperature above $45^{\circ}C$ was 28% which was lower than the average. The observational data about hourly average surface temperature and various heat balance factors at days where daily peak surface temperature is above $45^{\circ}C$ are as follows: An hour that had the daily maximum temperature was around 15 pm and the value was $49^{\circ}C$ approximately. Net shortwave radiation was the highest at 12pm as $800W/m^2$ and much radiation of $500W/m^2$ was absorbed at the ground between 11am and 17pm. Sensible heat that was delivered from the ground to the atmosphere was evaluated as $200W/m^2$ between 10am and 19pm. underground transfer heat up to $100W/m^2$ was measured as negative from 19pm to the next day 8am, which indicated the lower atmosphere was heated at night.

• 한국농림기상학회지
• /
• 제4권2호
• /
• pp.95-102
• /
• 2002

관측밀도가 낮고 지형이 복잡한 산악지역을 대상으로 낮 시간대 기온의 경시변화를 기존의 방법으로 내삽할 경우 일사수광량의 불균일한 분포 때문에 심각한 추정오차가 발생할 수 있다. 이를 해결하기 위해 기존의 기온감율을 고려한 거리역산가중 내삽모형에 일사수광량 보정항을 추가하고 오차경감 정도를 평가하였다. 강원도 평창군 일대 14km$\times$22km 지역을 10m 해상도의 수치고도모형으로 표현하고, 각 격자점에 대해 태양과 지표면 사이의 기하학적 관계를 바탕으로 시간대별 실제 일사 수광량을 직달, 산란, 반사 등 성분별로 계산하였다. 수평면 일사량과의 편차를 산출한 다음 이 지역에서 경험적으로 얻은 일사-기온 변환당량을 적용하여 보정값을 얻었다. 기존의 방법에 의해 내삽된 기온값에 이 보정값을 적용하여 대상지역 전역의 기온분포도를 작성하였다. 대상 지역 내 경사향이 서로 다른 8개 지점에서 기온을 측정하여 기온분포도와 비교한 결과 추정오차가 크게 줄어들었음을 확인할 수 있었다.

• 대기
• /
• 제22권3호
• /
• pp.299-307
• /
• 2012

This study is aimed to validate errors for detected suspicious temperature data using various quality control procedures for 61 weather stations in the Republic of Korea. The quality control algorithms for temperature data consist of four main procedures (high-low extreme check, internal consistency check, temporal outlier check, and spatial outlier check). Errors of detected suspicious temperature data are judged by examining temperature data of nearby stations, surface weather charts, hourly temperature data, daily precipitation, and daily maximum wind direction. The number of detected errors in internal consistency check and spatial outlier check showed 4 days (3 stations) and 7 days (5 stations), respectively. Effective and objective methods for validation errors through this study will help to reduce manpower and time for conduct of quality management for temperature data.

• 한국조경학회지
• /
• 제34권1호
• /
• pp.21-36
• /
• 2006

This study was undertaken to analyze the effects of pavement thermal properties and water retention characteristics on the surface temperature of the gray permeable cement concrete pavement during the summer. Following is a summary of major results. 1) The hourly surface temperature of pavement could be well predicted with a heat transfer model program that incorporated the input data of major meteorological variables including solar radiation, atmospheric temperature, dew point, wind velocity, cloudiness and the evaporation rate of the pavements predicted by the time domain reflectometry (TDR) method. 2) When the albedo was changed to 0.5 from an arbitrary starting condition of 0.3, holding other variables constant, the peak surface temperature of the pavement dropped by 11.5%. When heat capacity was changed to $2.5\;kJm^{-3}K^{-1}\;from\;1.5\;kJm^{-3}K^{-1}$, surface temperature dropped by 8.0%. When daily evaporation was changed to 1 mm from 2 mm, temperature dropped by 5.7%. When heat conductivity was changed to $2.5\;Wm^{-1}K^{-1}\;from\;1.5\;Wm^{-1}K^{-1}$, the peak surface temperature of the pavement fell by 1.2%. The peak pavement surface temperature under the arbitrary basic condition was $24.46^{\circ}C$ (12 a.m.). 3) It accordingly became evident that the pavement surface temperature can be most effectively lowered by using materials with a high albedo, a high heat capacity or a high evaporation at the pavement surface. The glare situation, however, is intensified by raising of the albedo, moreover if reflected light is absorbed into surrounding physical masses, it is changed into heat. It accordingly became evident that raising the heat capacity and the evaporative capacity may be the moot acceptable measures to improve the thermal characteristics of the pavement. 4) The sensitivity of the surface temperature to major meteorological variables was as follows. When the daily average temperature changed to $0^{\circ}C\;from\;15^{\circ}C$, holding all other variables constant, the peak surface temperature of the pavement decreased by 56.1 %. When the global solar radiation changed to $200\;Wm^{-2}\;from\;600\;Wm^{-2}$, the temperature of the pavement decreased by 23.4%. When the wind velocity changed to $8\;ms^{-1}\;from\;4\;ms^{-1}$, the temperature decreased by 1.4%. When the cloudiness level changed to 1.0 from 0.5, the peak surface temperature decreased by 0.7%. The peak pavement surface temperature under the arbitrary basic conditions was $24.46^{\circ}C$ (12 a.m.)

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.228-232
• /
• 2010

In this paper, various operating parameters of stream reforming process from methane in preconverter for MCFC is studied by numerical method. Commercial code is used to simulated the porous catalyst with user subroutine to model three dominant chemical reactions which are Stream Reforming(SR), Water-Gas Shift(WGS), and Direct Stram Reforming(DSR). The hydrogen production is tested with different wall temperature, Gas Hourly Space Velocity(GHSV), and different reactor shapes.