• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.178-183
• /
• 2008

This study investigated the effects of osmotic dehydration (OD) and vacuum impregnation (VI) on the quality of dried apple products. Weight reduction and water loss increased during OD, but these decreased in the apples during VI. In particular, VI's effect on increasing solid gain was superb. For apples in 40% sucrose solution, OD and VI were followed by hot-air drying at 50$^{\circ}C$. The experimental data were fitted successfully using the modified Page model. OD and VI increased drying time and decreased the drying rate constant of these apples as compared to the control. Shrinkage and rehydration capacity greatly decreased in the apples dried by OD and increased in the apples dried by VI as compared to the control. OD also decreased titratable acidity and ascorbic acid content considerably. Sensory evaluations of the products indicated that the apples prepared by OD had higher palatability in their rehydrated form in yoghurt, and the apple products prepared by VI had higher palatability in their dried form.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.119-119
• /
• 2009

인버터 DC 저항용접의 적용성 증대 : 인버터 DC 저항용접 공법이 SPOT, PROJECTON, SEAM, BUTT 등의 공정에 다양하게 적용되어 저항용접 현장에서 고효율, 친환경적 용접 환경을 만드는데 일조 하고 있다. 특히 자동차의 경량화, 충돌내성 증대, 진동 및 내구성 증대, 공간활용 극대화, 새로운 Design 개념 적용 등의 산업전반에 걸쳐 나타나는 신 Trends로 고 장력 철재의 적용 범위가 확대되고 HSS(High Strength Steel), EHSS(Extra High Strength Steel), UHSS (Ultra High strength Steel ; Hot - Formed Steel )등 다양한 철판의 SPOT 저항용접이 필요하게 되었다. 기존의 AC 단상용접의 전력 특성 상 통전 중 무 통전 시간 과 높은 PEAK 전력, 단상 대 전력 소모로 인한 전력 DROP 등의 문제로 인하여 신소재의 용접 시 매우 많은 Spatter가 발생하고, 높은 용접품질의 확보가 어려워 지므로 이를 대체하기 위한 공법으로 MFDC ( 인버터 DC 저항용접공법 )이 적용되고 있다. 인버터 DC 저항용접의 적응제어 : MFDC라는 높은 효율의 용접 전력원이 확보 됨에도 불구하고 용접현장에서는 원 자재, 도금 등의 품질 산포, 프레스 물의 가공산포, 공기압 산포, 전극 과열 및 마모 등의 요인에 의하여 저항용접 산포가 발생하고 있다. 이는 인위적인 조작이 어렵고 불규칙적이며, 어디서나 산재하고 있는 문제이다. 이를 용접전력 제어 법으로 개선하여 일정한 용접성을 확보하기 위한 노력이 적응제어 기법이다. 정 전류, 정 전력 제어는 정량 제어로 용접 물을 비롯한 용접부의 변화와는 관계없이 설정된 일정량의 전력을 공급하기만 하는데 반하여 적응제어는 적절한 용접 작업 시의 용접 물의 상태, 전극의 가압, 표면 상태 등에 따른 변화 페턴을 기억하고 이후 진행되는 용접에 대하여 정상 페턴과의 차이를 감지 이를 보상하므로 고품질의 용접성을 보장하는 제어기법이다. 따라서 다양한 용접 산포 유발 요인에 의해 용접부의 변화가 발생한다 하여도 그 변화를 감지 하고 적절한 용접전력을 공급한다면 고품질의 용접성을 확보하는데 유용한 공법이 될 수 있다. 인버터 DC 저항용접의 SPC 관리 : SPOT 용접 시 획득할 수 있는 다양한 파라메터에 대하여 모니터링 하고 이 자료를 data 화 하여 품질 관리에 응용하게 되면 양산라인에서 반복적으로 발생되는 문제점을 확인 할 수 있고 이를 통계적 방법으로 추적 개선해 나간다면 용접 불량 감소 및 생산성 향상에 도움이 되며 작업자의 공정 능력 향상 및 기업의 기술축적에도 높은 기여를 할 수 있을 것이다. 용접 적응제어와 다양한 파라메터 모니터링이 한 system에서 이루어 질 때 높은 용접성 확보와 불량률 감소, 원가절감, 생산성 향상 등의 효과가 극대화 될 것이다.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.32 no.4
• /
• pp.132-143
• /
• 2019

Objectives: The purpose of this study is to provide basic information on Korean medical research and treatment through analysis of breast cancer patients, who visited ${\bigcirc}{\bigcirc}$ university Korean medicine hospital. Methods: To analyze characteristics of breast cancer patients who visited korean medicine hospital, we searched medical records from January 1, 2016 to May 13, 2019, and 86 breast cancer patients were analyzed. Results: 1. The general characteristics of the subjects are as follows. The average age was $47.65{\pm}9.62years$ and 40's was the most (46.51%). The average height was $159.78{\pm}4.91cm$ and the average weight was $57.29{\pm}9.34kg$. The average body mass index (BMI) of the patients was $22.40{\pm}3.50kg/m^2$. 2. The stage distribution record indicated stage０ (9.72%), stageI (31.94%), stageII (34.72%), stageIII (20.83%) and stageIV (2.78%). 14 patients with unknown stage were excluded. 3. Before coming to the korean medicine hospital, of the 86 patients, 72 (83.72%) patients received surgical therapy, 55 (63.95%) patients received chemotherapy and 44 (51.16%) patients received radiotherapy. 11 (12.79%) patients chose oriental medicine as their primary treatment option. 4. The mean duration from diagnosis to hospital visit was $13.87{\pm}15.53months$. Among the total 86 patients, 46 (53.49%) patients visited for symptom relief during the follow-up period. 5. The most common symptom was general weakness in 29 (33.72%) patients, followed by hot flash, myalgia, insomnia, digestion disorder, numbness, edema, arthralgia, operation site pain, cold sensation and mastalgia. 6. Among 86 patients, 55 (63.95%) patients received acupuncture and moxibustion together. The most prescribed herbal medicine to subjects was Sibjeondaebo-tang-gamibang and Cheonhye-dan (25%). Conclusions: These results could be helpful to provide basic data on the Korean medical approach of breast cancer patients.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.140-149
• /
• 2021

Mushroom-derived polysaccharides, which are the primary bioactive constituents, are beneficial for human health. Polysaccharides have immuno-modulation, antitumor, and antioxidant properties. Additionally, they have antiviral properties and protect against chronic radiation stress. In this study, high yield water-soluble polysaccharides were obtained from Pleurotus djamor var. roseus basidiocarps. The crude polysaccharide (CP) was extracted sequentially by hot water and ethanol precipitation. The yield of the brown CPs was 5.6% dw. Diethylaminoethyl cellulose and Sepharose-6B column chromatography of CPs generated several fractions. Total glucan content was determined in all the fractions. The F1 fraction displayed the highest sugar content and was considered as a purified polysaccharide (PP). The total glucan and β-glucan content in the four fractions ranged between 76.85-2.95% and 75.08-1.46%, respectively. The yield of the PPs was 300 mg, and it was obtained as a white powder. The PPs were characterized by Fourier-transform infrared spectroscopy (FTIR) and thin-layer chromatography. The FTIR spectral details confirmed the presence of a xylopentose polysaccharide. The antioxidant activity of the PPs was evaluated using in vitro 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging assay and superoxide radical scavenging assay. The PPs showed strong DPPH free radical and superoxide anion radical scavenging activities in a dose-dependent manner. Purified PPs free of phenolics, protein, and carbohydrates were mainly responsible for the radical scavenging activity. The data suggest the potential of PPs as natural antioxidants.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.76-82
• /
• 2019

This study was investigate the characteristics of GHGs ($CO_2$, $CH_4$, and $N_2O$) emissions of diesel medium duty trucks according to their various driving modes. GHGs emissions decreased as vehicle speed increased, and emissions increased after 64.7 km/h. The 4.5 ton trucks show higher values of $CO_2$, $CH_4$, $N_2O$, 35%, 25%, and 57%, respectively, comparing of the 2.5 ton trucks. Also, $CO_2$ emissions under WHVC mode were 20% lower than those under the NEDC mode. In the case of cold start condition, $CO_2$ emissions were 12-13% higher than those for hot start condition. In the future, the result of present study will provide basic data to set up GHGs emission standards for medium and heavy duty vehicles.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.4-19
• /
• 2009

Though admitting that, in light of the recent archaeological trend, the excavation on relics of Sam-gama (a sort of kiln steaming the hemp) is increasingly reported, little efforts by far have been made not only to restore its traditional structure design but also to research hardly the change of hemp-steaming technologies in ages. In this regard, this paper shows the exploration of structural method and design as well as operability with regard to Sam-gut, traditional hemp-processing equipment that was recently reconstructed in Jungsun, Kangwon Province. Samgut, generally positioned at the waterside area, is an traditional device for steaming hemp to get bast fibers from the raw material of hemp, principally consisting of HWA-JIP(fire-place) to obtain steams by feeding fire ad Mong-got(boiling chamber) to make the hemp steamed after stacking. More specifically, thick round-logs were piled at the bottom of Hwajip prior to stacking stones around its circumferential area. When the timber positioned below gets burned with high temperature to heat stones existing in the upper side, waters then poured onto it after laying a bundle of grass and soil up to the boiled stones. If so, there generates hot vapor, which is conveyed to Monggot to steam the hemp. Functionally, it is of outstanding importance that Samgut is capable of producing high-temperature water vapors instantaneously under the intensive manpower, thus being constructed achievable for those purposes. The Samgut made by digging the ground is an instant facility that is closed after use. The remains, which were used to generate higher thermal power for steaming hemp, make it hard to excavate the historic traits because there left little vestiges in the soil, which means keen attention must be paid to find out the trace of Smgama relics. Future research stall be focused on collection of broader data regarding Samgut including technological review in extracting bas fibers from the hemp.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.4
• /
• pp.321-334
• /
• 2018

There are many factors that cause uneven regional developments in the country and one of main factors is outflow of regional income or products. The purpose of this study is to analyze regional production runoff by comparing GRDP and GRNI in basic local governments level. In this study, GRNI of basic local governments are estimated by local income tax data, The results of the study are as follows. Firstly, GRNI is more concentrated than GRDP. The analysis of Moran I showed that the spatial autocor-relation of GRNI is more distinct than that of GRDP. Local Moran I analysis shows that spatial hot spots and cold spots are more apparent in GRNI than GRDP. Secondly, the outflows of GRDP into a small number of regions are apparent. In about 80% of basic local governments, the net outflows of GRDP occur. The large net outflow regions are cities where manufacturing industry has developed and in the 20 lowest net outflow rate regions, 70-80% of GRDP outflows. The large net inflow regions are metropolitan area in Seoul and large local cities. Seocho-gu, Yongsan-gu, and Gangnam-gu in Seoul have a large net inflows and net inflow rates are over 90% of GRDP.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.101-138
• /
• 2014

This study examined the influence and meaning of SNS as the hot topic of our time from the archival perspective and also studied the 'SNS records management'. The many users mean a high accessibility and utilization of SNS, which increase the influence and value of SNS as a record. Politically, SNS is a tool that strengthens the communication among the voters, politicians and the public while economically, it is a window to accept the complaints of the customers and a marketing tool. In addition, the voices of social minorities are also recorded unlike in the traditional media, which makes the SNS record a method to gain the social variety and diversity. SNS is a place of formation of collective memory and collective memory itself. Furthermore, it can play the role of public sphere. It also is a place for generation of 'big data' in an archival sense. In addition, this study has classified the SNS records management into primary and secondary management that include record management entities, subjects, periods, methods, and causes. This study analyzed the history, status, and the meaning of SNS to assess the values and meanings as the preliminary study for the future SNS record management studies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.77-83
• /
• 2020

The heat treatment facility is in a situation where the scope of application of the remote IOT system is expanding due to the harsh environment caused by high heat and long working hours among the root industries. In this heat treatment process environment, the IOT middleware is required to play a pivotal role in interpreting, managing and controlling data information of IoT devices (sensors, etc.). Until now, the system controlled by the heat treatment remotely was operated with the command of the operator's batch system without overall monitoring of the site situation. However, for the safety and precise control of the heat treatment facility, it is necessary to control various sensors and recognize the surrounding work environment. As a solution to this, the heat treatment safety support system presented in this paper proposes a support system that can detect the access of the work manpower to the heat treatment furnace through thermal image detection and operate safely when ordering work from a remote location. In addition, an OPEN CV-based deterioration analysis system using DNN deep learning network was constructed for faster and more accurate recognition than general fixed hot spot monitoring-based thermal image analysis. Through this, we would like to propose a system that can be used universally in the heat treatment environment and support the safety management specialized in the heat treatment industry.

• Journal of Ginseng Research
• /
• v.45 no.2
• /
• pp.305-315
• /
• 2021

Background: Panax stipuleanatus represents a folk medicine for treatment of inflammation. However, lack of experimental data does not confirm its function. This article aims to investigate the analgesic and anti-inflammatory activities of triterpenoid saponins isolated from P. stipuleanatus. Methods: The chemical characterization of P. stipuleanatus allowed the identification and quantitation of two major compounds. Analgesic effects of triterpenoid saponins were evaluated in two models of thermal- and chemical-stimulated acute pain. Anti-inflammatory effects of triterpenoid saponins were also evaluated using four models of acetic acid-induced vascular permeability, xylene-induced ear edema, carrageenan-induced paw edema, and cotton pellet-induced granuloma in mice. Results: Two triterpenoid saponins of stipuleanosides R₁ (SP-R₁) and R₂ (SP-R₂) were isolated and identified from P. stipuleanatus. The results showed that SP-R₁ and SP-R₂ significantly increased the latency time to thermal pain in the hot plate test and reduced the writhing response in the acetic acid-induced writhing test. SP-R₁ and SP-R₂ caused a significant decrease in vascular permeability, ear edema, paw edema, and granuloma formation in inflammatory models. Further studies showed that the levels of inflammatory mediators, nitric oxide, malondialdehyde, tumor necrosis factor-α, and interleukin 6 in paw tissues were downregulated by SP-R₁ and SP-R₂. In addition, the rational harvest of three- to five-year-old P. stipuleanatus was preferable to obtain a higher level of triterpenoid saponins. SP-R₂ showed the highest content in P. stipuleanatus, which had potential as a chemical marker for quality control of P. stipuleanatus. Conclusion: This study provides important basic information about utilization of P. stipuleanatus resources for production of active triterpenoid saponins.