• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.325-330
• /
• 2015

Pipe wall-thinning by flow-accelerated corrosion (FAC) is a significant and costly damage of secondary system piping in nuclear power plants (NPPs). All NPPs have their management programs to ensure pipe integrity from wall-thinning. This study analyzed the pipe wall-thinning caused by changing the amine, which is used for adjusting the water chemistry in the secondary system of NPPs. The pH change was analyzed according to the addition of amine. Then, the wear rate calculated in two different amines was compared at the steam cycle in NPPs. As a result, increasing the pH at operating temperature (Hot pH) can reduce the rate of FAC damage significantly. Wall-thinning is affected by amine characteristics depending on temperature and quality of water.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.457-467
• /
• 2001

It is well known that the performance of a fuzzy neural network strongly depends on the input features selected for its training. In its applications to sensor signal estimation, there are a large number of input variables related with an output As the number of input variables increases, the training time of fuzzy neural networks required increases exponentially. Thus, it is essential to reduce the number of inputs to a fuzzy neural network and to select the optimum number of mutually independent inputs that are able to clearly define the input-output mapping. In this work, principal component analysis (PCA), genetic algorithms (CA) and probability theory are combined to select new important input features. A proposed feature selection method is applied to the signal estimation of the steam generator water level, the hot-leg flowrate, the pressurizer water level and the pressurizer pressure sensors in pressurized water reactors and compared with other input feature selection methods.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.345-350
• /
• 2008

The present study has been conducted to develop a heat recovery system for a 1 MW class gas engine based cogeneration system. In the cogeneration system, heat is recovered from two parts, which are jacket water and exhaust gas. The heat from the jacket water is recovered by a plate type heat exchanger and used for the room heating and/or hot water supply. The heat from the exhaust gas is used to generate steam. For both of the heat recovery devices, 1/5 scaled tests are performed and the data are compared to the conventional correlations for the design.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.415-418
• /
• 2008

This paper presents an innovative prototype of a new conceptual electromagnetic induction-based fluid beating appliance using voltage-fed type scries capacitor-compensated load resonant high-frequency IGBT inverter with a phase-shifted PWM and a power factor correction schemes. Its operating characteristics in steady-state are illustrated including unique features and evaluated on the basis of its computer simulation and experimental results of 10kw breadboard appliance for hot water producer and superheated steamer. The promising cost effective inverter-fed boiler appliances for electromagnetic induction-heated type fluid-heating in the pipeline systems are proposed for induction-heated boiler, super heat steamer, high temperature water producer, hot gas producer and metal catalyst heating for exhaust gas cleaning in engine, which are more suitable and acceptable for industrial, chemical, and consumer energy utilization for household and business from a practical point of view.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.474-477
• /
• 2002

Equipment to cauterize tumors by an electrically heated Kanthal wire is under development. The wire( alloy of iron, chromium and Aluminum) keeps sufficient strength up to 1400 degrees in Celsius. Although AC 50Hz current source is used in the prototype experiment, RF current will be used in future. The diameter of the Kanthal wire was 0.3 mm which was connected to Kanthal wire of 0.8 mm. The thicker wire was used as a leading wire. The possibility of application of the heating wire in combination with an ultrasound endoscope was determined, where ultrasound endoscope is to be used to monitor the location on the wire and an extent of a tumor in digestive organs. This procedure requires the wire to be applied inside ultrasound transmitting media. First, the wire was applied in the degassed water in which a chicken liver sample was submerged. The wire, however, burned out in water soon after it became red-hot at 12 A. The reason is that large current is required for the wire to become red-hot due to strong convection. Starch paste of 3 weight percent was employed instead of water. This made the wire red-hot approximately at 6 A, showing the increased viscosity of the starch decreased the convection and the wire was cover by the steam. The liver sample was cauterized successively, while the location of the wire and the liver was monitored by an ultrasound diagnosis equipment outside the plastic vessel of the starch paste.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.147-151
• /
• 1994

Hydrogen donating activities(HDA) of solvent extracts of Hololeion maximowiczii roots which were treated with freeze drying, hot air drying and hot air drying after steam blanching were investigated by the method of ${\alpha},{\alpha}'$-diphenyl-${\beta}$-picrylhydrazyl(DPPH). Hydrogen donating activity of hot air drying after steam blanching group showed the highest activity among three drying methods. Among the extracts of freeze dried root extracted with various solvents, color intensity at 420 nm of aqueous extract was highest, but hydrogen donating activity was shown in order of 50%, ethyl alcohol, methyl alcohol, water extracts. By heating the powder of freeze dried root at $100^{\circ}C$, color intensity of its water extract was decreased until 20 min, thereafter it was increased slowly but hydrogen donating activity was rapidly increased until 30 min. Hydrogen donating activity at the concentration of 6.05 mg/ml of 50% alcohol extract was similar to that of ${\alpha}-tocopherol$ at the concentration of $2{\times}10^{-4}M$. Comparison of hydrogen donating activity of the inner and outer solution after dialysis of water extract showed that the outer solution had a stronger hydrogen donating activity than those of the inner one.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.303-308
• /
• 2014

This study determined the antioxidant levels and activities of hot water aronia extracts by different drying methods such as sun drying, sun drying after steam treatment, freeze-drying, and oven drying. The total polyphenol content, calculated as gallic acid equivalent, was the highest in the freeze-dried sample (910 mg), followed by sun-dried after steam treatment (779 mg), sun-dried (769 mg), and oven-dried (757 mg) samples. Similar patterns were observed for the total flavonoid and anthocyanin contents. Freeze-dried aronia samples contained the highest polyphenol, flavonoid, and anthocyanin contents as compared to the samples dried by other methods. All antioxidant activities were found to increase in a dose-dependent manner. For the hot water-extracted freeze-dried aronia powder (200 mg/mL), the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radicalscavenging activities were 65.5% and 61.7% and the hydroxyl and superoxide anion radical-scavenging activities were 50.5% and 52.1%, respectively. These results suggest that comparatively, freeze-drying is a better method for preserving the bioactive components and the antioxidant activities of aronia.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.84-92
• /
• 2003

A one-dimensional thermal-hydraulic analysis computer program is developed for thermal sizing of a copper bonded steam generator. It is assumed that the conduction heat transfer of copper region between the hot side and the cold side tube is one-dimensional and its thermal resistance is derived as a function of a tube pitch. The flow regions of the water/steam side are divided into four regions: subcooled, saturated, film boiling, and super-heated. The number of tube selected ranges from 250 to 3500 and the pitch to tube diameter (P/D) ratios are 1.4, 1.6 and 1.8 for the parametric study calculation. The calculation results showed that when the number of tube was 2500, the length of the heating tube was about 12 m and the outside diameter of the steam generator was about 3 m. If the P/D ratio increases, the thermal resistance of copper component also increases, however the length of the heating tube is not so much increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.5
• /
• pp.311-318
• /
• 2009

In previous study, a new allocation methodology of common cost on multi-product have been suggested. The aim of this study is to suggest the methodology that allocates an environment pollution cost including carbon emission cost to each cost of multi-product. For this study, a supposed multi-energy system composed of twenty kinds of systems was made. The multi-energy system produces eighteen kinds of outputs that are electricity, steam, hot water, chilled water, ice, warm air, and cooling air from seven kinds of energy source that are LNG, coil, geothermal energy, sun heat, hydrogen, bio-mass, and waste. The new methodology was applied to the multi-energy system in order to allocate the environment pollution cost to each production cost, and twenty seven equations were induced. From this result, it is concluded that this methodology can estimate each unit cost and allocate each cost flow in any product of any energy system.

• Solar Energy
• /
• v.18 no.4
• /
• pp.23-32
• /
• 1998

Fuel cells supply electric power and heat at work, and their exhaust gas is comparatively clear. So they are in the limelight as one of the co-generation systems which behave friendly with the environment. Fuel cells discharge both steam and hot water. Accordingly, if we combine absorption heat pump driven by waste heat with fuel cells, we can construct an advanced energy conserving system. The purpose of this study is the objective for evaluating the possibilities of effectively utilizing waste heat of fuel cells as a heat source for the single and double effect absorption systems. Simulation studies on single and double effect absorption have been performed for water/lithium-bromide pair. The effectiveness of introducing a waste heat source of fuel cells is demonstrated. The result of this study showed that total efficiency was about 85% at rated operation and about 75% at 75% load operation. Absorption cycle moved to more strong concentration when fuel cell operated at 75% load.