• Journal of the Korean Wood Science and Technology
• /
• 제20권3호
• /
• pp.11-20
• /
• 1992

Steam explosion is one of the most effective pretreatment for fractionating wood. This leads to the total utilization of wood basic components; cellulose, hemicellulose and lignin. The amount of sugar and lignin extracted with the hot water method was very low. The lignin content of residues after extraction with using a sodium hydroxide treatment, increased delignification of carbohydrate as the concentration of alkali was increased. Oak, pretreated with steam exploded at 25kg/$cm^2$ for 6 min. then 1% alkali for 2hrs. showed a delignification rate up to 95%. A sodium chlorite treatment of steam exploded pine and oak also afforded a high deligninfication effect. Pine, treated 10% sodium chlorite for 2hrs. showed high delignification. However, by using a sodium hydroxide treatment, a 2% retreatment for Ihr. after a 2% for 2hrs. afforded remarkable delignification effect on exploded wood at 30kg/$cm^2$ for 9min. and at 35kg/$cm^2$ for 3-6min. In oak, an initial 2hrs. treatment of 2% sodium chlorite was followed by a second 2hrs. treatment at 10%. This showed a delignification rate of 96%.

• Journal of the Korean Wood Science and Technology
• /
• 제20권4호
• /
• pp.65-72
• /
• 1992

Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2009

본 논문에서는 국제적으로 개발 중인 초고온가스로와 연계하여 대량의 수소를 생산하기 위한 방안의 일환으로 국내에서 개발 중인 고온증기전기분해 시스템에 사용될 열교환기 재료의 고온증기 부식실험에 대해 소개하였다. 이를 위해 관련된 국내외 연구현황을 조사분석한 결과를 요약하여 소개하였으며 마지막으로 현재 수행중인 고온증기부식 연구의 실험조건 및 계획을 제시하였다. 실험 및 연구결과는 초고온가스로와 연계된 고온전기분해를 이용한 수소생산시스템의 개발에 활용될 예정이다.

• 한국식품영양과학회지
• /
• 제3권1호
• /
• pp.13-16
• /
• 1974

Chlorophyll을 함유(含有)하고 있는 녹색 식물(植物)의 조리(調理)에 의(依)한 색깔 변화(變化)는 대단히 중요(重要)하므로, 본실험(本實驗)은 각각(各各) 다른 열처리(熱處理)와 시간(時間)이 풋고추의 chlorophyll 함량(含量)에 미치는 영향을 조사하였다. 풋고추는 boiling water steam 그리고 hot air 를 사용(使用)하여, $100^{\circ}C$에서 5 10 15 분간(分間) 가열(加熱)했고, microwave oven에서는 1 2 3 분간(分間) 처리했다. 결과(結果)에 의(依)하면 chlorophyll 함량(含量)은 일반적(一般的)으로 가열시간(加熱時間)이 길어짐에 따라 감소하는 경향이었으며, 가열처리중(加熱處理中) steam이 가장 큰 영향을 주었고, boiling water 가 그 다음이었다. Hot air와 microwave 처리한 풋고추는 아주 적은 양의 chlorophyll이 변화(變化)하였다. 일반적으로 pheophytin 생성(生成) chlorophyll 함량(含量)이 감소함에 따라 증가(增加)하였다.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.629-635
• /
• 2008

Recently, microturbines have received attention as a small-scale distributed power generator. Since the exhaust gas carries all of the heat release, the microturbine CHP (combined heat and power) system is relatively compact and easy to maintain. Generating hot water or steam is usual method of heat recovery from the microturbine. In this work, a heat recovery unit producing hot water was installed at the exhaust side of a 30 kW class microturbine and its performance characteristics following microturbine power variation was investigated. Heat recovery performance has been compared for different operating conditions such as constant hot water temperature and constant water flow rate. In particular, the influence of water flow rate and hot water temperature on the recovered heat was analyzed.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1051-1056
• /
• 2014

열간 압연을 거친 $800^{\circ}C$ 이상의 고온 철강 판재는 일반적으로 다중 봉상 수분류(multiple circular water jets)에 의해서 급속 냉각된다. 이 과정은 소재의 온도가 냉각수의 끓는점보다 훨씬 높기 때문에 소재 표면과 냉각수 사이에 막비등 열전달 현상이 발생하며 소재 표면에 매우 얇은 증기층이 형성되며, 이 증기층은 소재와 냉각수의 열교환을 방해하는 중요한 열저항으로 작용한다. 본 문제에는 비등 열전달 이외에도 소재 표면에 쌓이는 체류수의 자유표면 유동, 소재의 고속 주행 등 복잡한 물리현상들이 복합적으로 작용하고 있다. 본 논문에서는 이 모든 물리현상들을 동시에 고려할 수 있는 해석 절차를 적용하여 일정한 속도로 주행하는 고온 철강 판재의 상하부 동시 냉각 과정을 3 차원 수치해석 하였으며, 소재 상부 및 하부 면의 냉각 특성을 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.4-53
• /
• 2001

This paper described about the system which can be inspect work roll surface for deciding a milling schedule and roll changing at hot strip mill in POSCO. Developed system consists of CCD camera, Xenon lamp with fiber bundle and mechanical control part. The water probe build up water pole between head of probe and roll surface to acquisite a good image from a work roll surface under the bad environment with steam, cooling water and high temperature. This system is possible to monitor a work roll surface of about 12${\times}$9mm. We have shown the validation of the developed system which can monitor the evolution of degradation on work roll surface.

• 한국태양에너지학회 논문집
• /
• 제25권2호
• /
• pp.63-69
• /
• 2005

This study is the survey of a transition procedure of building services systems(heat source, HVAC, water supply) through the survey of existing office buildings, building design documents. The preference & major consideration of system selection is the engineer's opinions. The results of this survey can be used in selection of building services system design. In this survey, "Hot & cold water generator system" and "single duct CAV+FCU system", "Elevated water tank system" are selected. The most important consideration in system selection is the energy saving in heat source system, and comfort in HVAC system, and water pressure in water supply system. They prefer "steam boiler+absorption chiller system" for heat source system, "steam boiler+ice thermal storage system", "hot & cold water generator system", "district heating+absorption chiller system" : "single duct CAV+FCU system" and "single duct VAV+convector system" for HVAC system: and "booster pump system" for water supply system.

• 설비공학논문집
• /
• 제29권7호
• /
• pp.373-384
• /
• 2017

The objective of this study was to determine the effect of refrigerant heat exchanger on the performance of type II absorption heat pump performance using numerical analysis. Two heat exchange installation methods were used: solution to refrigerant and waste hot water to refrigerant. These methods were compared to the standard model of hot water flow without using refrigerant heat exchanger. When waste hot waters were bypassed to refrigerant heat exchanger, COP was not affected. However, steam mass generation rates were increased compared to those of the standard model. When solutions were bypassed to the refrigerant heat exchanger, results were different depending on the place where the solution rejoined. COP and steam mass generation rates were lower compared to those when waste heat water was passed to refrigerant heat exchanger. Thus, it is possible to obtain higher steam mass generation rates by using waste water and installing refrigerant heat exchanger.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.22-29
• /
• 2011

In this study, the damage mechanism of large scale steam turbine due to water induction was analyzed and recovery characteristics were reviewed. A turbine consists of the rotating rotor and the stationary casing, and the clearance between them is very small for the efficiency enhancement. If water induction, while relatively cold steam or water is introduced into turbine, occurs, the considerable humping is caused at the casing near the initial water induction point and that induces the rubbing between rotor and casing. Finally, it leads to the catastrophic failure. Bowed rotor has the different characteristics in the recovery depending on damage degree. The elastic deformation due to light rubbing is recovered by turning the rotor with 3 rpm under normal operation condition, but most plastic deformation due to rubbing deforms the local microstructure and that results in permanent deformation which could not be recovered under normal operation condition. Bowed rotor has diverse characteristics depending on the recovery method, and the method is empirical and needs the cutting edge technology. Careful recovery treatment of the rotor will eliminate the risks and secure the high quality rotor similar to new rotor. If any critical error is made during the recovery, the rotor would not be recovered permanently and it should be scrapped.