The empty fruit bunch fibers(EFB) of oil palm were examined for optimal utilization of the EFB fibers. The EFB fibers were obtained by shredding EFB, followe by removal of fines. The surface properties of the fibers were modified with various pre-treatments, such as hot water extraction, the soaking treatments with NaOH, $ClO_2$ and n-hexane. The changes in the fiber surface were examined with FT-IR method, which showed the changes in chemical compositions such as pectin, lignin, and etc. according to the pre-treatment methods. And the z-directional tensile testing of the fiber mold made of the treated EFB fibers showed the changes in the bonding strength by the pre-treatments. The fiber mold made of EFB fibers treated with $ClO_2$ showed the greater increase in the tensile energy absorption although the NaOH treatment resulted in the severer impact on the EFB fibers.
High-efficient HEV Engine cooling systems reflects variable coolant temperature because it can decrease the hydrodynamic frictional losses of lubricated engine parts in light duty conditions. In order to safely raise the operating temperature of passenger cars to a constant higher level, and thus optimize combustion and all accompanying factors, a new thermostat technology was developed : the electronically map-controlled thermostat. In this work, various crystalline plastics such as polyphthalamide (PPA) and polyphenylenesulfide (PPS) mixed with various glass fiber amounts were introduced into plastic fittings of automotive electronic controlled thermostat for the purpose of suppressing influx of coolant into the element and undesirable opening during hot soaking. Skirt was installed around element frame of automotive electronic controlled thermostat for improving thermal sensitivity in terms of response time, hysteresis and melting temperature. To validate the effectiveness and optimum shape of skirt, thermal sensitivity test and three-dimensional CFD simulation have been performed. As a consequence, important improvement in thermal sensitivity with less than 3℃ of maximum coolant temperature between opening and engine inlet was obtained.
This study is conducted on hardening leather with improved firmness and stability of shape, based on research on types and thickness of leather. The purpose of this study is to test the physical properties of the leather for molding to prepare the foundation for leather molding based on the test results using four methods by thickness of Vegetable and Split. The tests were conducted using a total of five leather types, including three types of vegetable leathers and two types of split, by thickness. Based on the testing method for leathers in KS M 6882, the tests were performed at 27℃ with relative humidity of 65±20%. The samples were prepared with cowhide, size 9cm× 2cm. The measurement parameters are length and width. thickness, volume, mass, density. Regarding the hardening treatment method, changes in appearance and major physical characteristics of leather were reviewed by soaking in hot water, dry heating, hammering, waxing, and olive oil coating. The study results are as follows. In planar works, it is judged that hardening work using a hammer is more suitable for stiffness or density in order to prevent easy breakage with adult muscle density, rather than boiling water or baking. In conclusion, there is no curling, soot, or breaking phenomenon, and the densest curing method is 50℃ for 20 sec of V2 and 75℃ for 60 sec of V2 in boiling water. The combination of paraffin treatment improve waterproof and quality.
A hot-dip simulator was utilized to replicate abnormal coating buildup observed during line stops at galvanize lines, assessing the influence of processing conditions on buildup (up to 14 mm/side). Steel samples from 19 coils (comprising IF, BH, LCAK, HSLA, DP600-DP1180, Si: 0.006 - 0.8 wt%, P: 0.009 - 0.045 wt%) were examined to explore the phenomenon of heavy coating growth. It was discovered that heavy coating buildup (~3 mm/h) and rapid strip dissolution (~0.17 mm/h) in a GA or GI pot can manifest with specific combinations of steel chemistry and processing conditions. The results reveal the formation of a unique coating microstructure, characterized by a blend of bulky Zeta crystals and free Zn pockets/networks due to the "Sandlin" growth mechanism. Key variables contributing to abnormal coating growth include steel Si content, anneal temperature, dew point in heating and soaking furnaces, Zn pot temperature, Zn bath Al%, and cold-rolling reduction%. At ArcelorMittal Dofasco galvanize lines, an automatic online warning system for operators and special scheduling for incoming Si-bearing steels have been implemented, effectively preventing further heavy buildup occurrences.
본 연구에서는 안동지역의 종가에서 약용식물 및 산채류를 재료로 전통방식으로 제조된 장아찌 15종 및 대형마트에서 판매되는 장아찌 6종을 대상으로 장아찌의 물리화학적 특성과 미생물학적 위해성을 검토하였다. 21종 장아찌의 절임액 및 절임육의 평균 pH는 $3.99{\pm}0.38$ 및 $3.51{\pm}0.41$로 절임육에서 더욱 낮은 pH를 나타내었으며, 절임액 및 절임육의 평균 산도는 각각$1.59{\pm}0.54$ 및 $1.65{\pm}0.76$으로 나타났다. 장아찌의 절임액 및 절임육의 평균 brix는 $27.67{\pm}8.38$ 및 $25.61{\pm}6.60$으로 절임액에서 약간 높은 값을 나타내었으며, 장아찌에서 문제가 되고 있는 평균 염도(%)는 절임액 및 절임육에서 각각 $7.55{\pm}3.26$ 및 $5.75{\pm}2.23$으로 나타났다. 특히 청양고추, 두릅, 어수리, 깻잎, 꾸지뽕, 명이 및 산초 장아찌 절임액에서는 8.8% 이상의 높은 염도를 나타내어, 대형마트의 살균 장아찌 제품보다 2배 이상의 염도를 나타내었다. 그러나 대형마트의 비살균 장아찌 제품의 평균 염도는 $12.45{\pm}0.92$ 및 $9.10{\pm}3.25$로 민간제조 장아찌보다 더욱 높게 나타났다. 21종 장아찌의 색차와 탁도를 측정한 결과, 평균 명도, 적색도 및 황색도는 각각 $31.03{\pm}7.54$, $8.03{\pm}5.09$ 및 $19.12{\pm}4.16$으로 나타났으며, 색차와 탁도는 절임육의 물리적 특성을 반영하고 있었다. 미생물학적 위해평가에서는 21종 장아찌 모두에서 식중독 유해균은 검출되지 않았으며, 총 균수 측정에서는 민간 전통방식으로 제조된 장아찌에 비해 대형마트에서 판매되는 장아찌가 상대적으로 취약하여, 이에 대한 미생물학적 위해관리가 필요함을 확인하였다.
건축물(建築物)의 내장(內裝)에 많이 사용(使用)하고 있는 합판(合板)은 가열성(可燃性) 물질(物質)로서 각종(各種) 대형화재(大型火災)로 수발(受發)하여 많은 인명(人命)과 재산(財産)의 손실(損失)을 초래(招來)하고 있다. 따라서 이로 인(因)한 피해(被害)를 최대한(最大限)으로 줄이기 위(爲)하여, 내화합판제조(耐火合板製造)의 필요성(必要性)이 절실(絶實)히 요구(要求)되며 또한 내화합판제조(耐火合板製造)에서 우선적(優先的)으로 해결(解決)해야 될 합판(合板)의 재건조(再乾燥)에 관(關)해서 연구(硏究)할 필요(必要)가 있다고 생각한다. 본(本) 연구(硏究)에서는 3.5mm 얇은 5.0mm 두꺼운 합판(合板)에 Ammonium sulfate, Mono -ammonium phosphate, Di - ammonium phosphate, Borax - boric acid, Minalith 및 Water를 1, 3, 6 및 9 시간(時間)으로 처리하고 90, 120 및 $150^{\circ}C$ 등(等)으로 열판건조(熱板乾燥)를 실시한 후(後), 건조곡선(乾燥曲線), 건조율(乾燥率), 내화제(耐火劑)의 흡수율(吸收率), 비중(比重)(용적중(容積重)) 및 내화도(耐火度) 등(等)을 연구검토(硏究檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. (1) Borax-boric acid와 Minalith 처리시간(處理時間)이 증가(增價)함에 따라 양액(藥液) 흡수량(吸收量)율(率)이 증가(增加)하는 경향(傾向)이 뚜렷이 하였으나 수분처리(水分處理) 흡수량(吸收量)율(率)에는 미치지 못 하였다. (2) 합판(合板)의 단위용적당(單位容積當) 약액(藥液) 흡수량(吸收量)은 일정시간(一定時間)의 처리(處理)에 있어서 두께 3.5mm의 얇은 합판(合板)이 두께 5.0mm의 두꺼운 합판(合板)보다 높았으며 가장 높은 흡수량(吸收量)은 두께 3.5mm의 얇은 합판(合板)에서 9시간(時間)을 처리(處理)하였을 때 Ammonium sulfate에서 1.353kg/$(30cm)^3$의 치(値)를 나타내었고 두께 5.0mm의 두꺼운 합판(合板)에서는 역시(亦是) 9시간(時間)의 처리(處理)에서 Ammonium sulfate의 1.356kg/$(30cm)^3$의 치(値)를 얻었다. (3) 약액처리(藥液處理) 후(後)의 합판(合板)의 용적중(容積重)은 처리(處理) 전(前)보다 뚜렷하게 상승(上昇)하였으나 열판건조(熱板乾燥) 후(後)에는 다시 용적중(容積重)의 치(値)가 하락(下落)하였는데 약액처리(藥液處理) 전(前)보다는 약간 높은 경향(傾向)을 나타내었다. (4) 약액처리합판(藥液處理合板)의 두께팽창율(膨脹率)은 두께 3.5mm의 얇은 합판(合板)과 두께 5.0mm의 두꺼운 합판(合板)에서 모두 1시간(1時間)과 3시간(時間) 처리(處理)에서 팽창율(膨脹率)의 증가(增加)가 수분처리(水分處理)와 비슷한 경향(傾向)을 보였으나 처리시간(處理時間)이 6시간(時間) 이상(以上)으로 연장(延長)되면서 약액처리합판(藥液處理合板)보다 수분처리합판(水分處理合板)의 두께 팽창율(膨脹率)이 급상승(急上昇)하여 뚜렷하게 높은 치(値)를 나타내었는데 두께 5.0mm의 두꺼운 합판(合板)에서 더욱 큰 치(値)를 보였다. (5) 열판건조(熱板乾燥) 후(後)의 두께 수축율(收縮率)도 팽창율(膨脹率)과 똑같은 경향(傾向)을 나타내었으며 두께 5.0mm의 합판(合板)에서는 약액처리시간(藥液處理時間)이 증가(增加)함에 따란 수축율(收縮率)이 뚜렷하게 상승(上昇)하는 경향(傾向)을 모든 처리약액(處理藥液)과 수분처리(水分處理)에서 나타내었다. (6) 건조곡선(乾燥曲線)은 1시간(時間)과 3시간(時間)의 처리(處理)를 제외(除外)하고 두께에 관계(關係)없이 6시간(時間) 이상(以上)의 처리(處理)에서 모두 수분처리합판(水分處理合板)의 건조곡선(乾燥曲線)이 약액처리합판(藥液處理合板)의 곡선(曲線)보다 상위(上位에 위치(位置)하였다. (7) 처리합판(處理合板)의 두께에 따른 건조율(乾燥率)은 두께 3.5mm의 얇은 합판(合板)의 경우(境遇), 두께 5.0mm의 두꺼운 합판(合板)에서 얻은 건조율(乾燥率)보다 거의 두 배(倍) 이상(以上)의 치(値)를 나타내어 얇은 합판(合板)이 두꺼운 합판(合板)보다 건조효과(乾燥效果)가 뚜렷하게 높았다. (8) 건조온도(乾燥溫度)에 따른 건조율(乾燥率)은 열판온도(熱板溫度)가 상승(上昇)함에 따라 뚜렷하게 상승(上昇)하였으며 두께 3.5mm의 얇은 합판(合板)의 경우(境遇) 열판온도(熱板溫度) 90, 120 및 $150^{\circ}C$에서 각각(各各) 1.226%/min., 6.540%/min., 25.752%/min, 였고 두께 5.0mm의 두꺼운 합판(合板)에서는 각각(各各) 0.550%/min, 2.490%/min., 8.187%/min.를 나타내었다. (9) 약액별(藥液別) 건조율(乾燥率)은 열판온도(熱板溫度) $120^{\circ}C$로 건조(乾燥)하였을 때 두께 3.5mm의 얇은 합판(合板)에서 Mono-ammonium phosphate가 가장 높은 경향(傾向)을 나타내었고 두께 5.0mm의 두꺼운 합판(合板)에서는 Di-ammonium phosphate가 가장 높은 경향(傾向)을 나타내었으나 처리시간(處理時間) 6기간(時間) 이후(以後)에는 수분처리합판(水分處理合板)의 건조율(乾燥率)이 더 높았다. (10) 약액처리합판(藥液處理合板)의 내화도(耐火度)는 측정(測定)된 중량감소율(重量減少率), 착염시간(着炎時間), 잔염시간(殘炎時間), 이면(裏面)의 탄화율(炭火率)을 통(痛)하여 수분처리합판(水分處理合板)이나 미처리합판(未處理合板)보다 뚜렷하게 높았다. (11) 내화약제간(耐火藥劑間) 내화효과(耐火效果)는 Di-ammonium phosphate가 가장 우수(優秀)하였고 다음은 Mono-ammonium phosphate와 Ammonium sulfate이며 Borax-boric acid와 Minalith는 가장 불량(不良)하였다.
The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.
천연향신료와 식용 및 약용 겸용으로 재배가치가 매우 높은 초피나무종자의 발아율 향상을 위하여 $GA_3$, Kinetin 및 물리적인 처리를 하여 수행한 실험 결과를 요약하면 다음과 같다. 1. 초피 나무종자 종피파상후 $GA_3$ 50 ppm 24시간 침지에서 발아율 8.9%로 저조하였다. 2. 수온 $18^{\circ}C\;1{\sim}5$일 및 $40{\sim}70^{\circ}C$에서 10분처리 후 각각 $GA_3$ 50 ppm에 24시간 침지에서 초피종자 발아율 6.8, 4.4%로 매우 낮았다. 3. 화학적인 방법으로 $H_2SO_4,\;NaOH$ 및 $HNO_3$ 침지에서 초피나무종자 발아율 7,5, 2.7, 14.3%로서 저조하였다. 4. 초피나무종자에 대한 $GA_3$처리의 경우 $GA_3$ 100 ppm에서 48시간 침지가 91.1%의 가장 높은 발아율을 나타내었고 침지시간이 길어질수록 농도가 높을수록 발아율이 높아지는 경향이었다. 5. Kinetin은 50 ppm 12시간 침지에서 초피종자의 발아율은 31.7%로 양호하였으나 전반적으로 낮은 발아율을 나타내어 실용적인 방법으로는 미흡하였다.
Cha Yong-Jun;Park Sung-Young;Jeong Eun-Jeong;Chung Yeon-Jung;Kim So-Jung
Fisheries and Aquatic Sciences
/
제4권4호
/
pp.238-245
/
2001
Optimal conditions for processing. of seasoned-dried Pacific saury treated with liquid smoke (T2) were evaluated by physicochemical and microbial experiments and sensory evaluation, comparing with control (seasoning only, C) and treatment I $(0.05\%\;Rosemary\;instead\;of\;liquid\;smoke,\;Tl)$. Two hrs of seasoning time was set, and 23 hrs of drying time was determined in all samples. Finally, T2 product was made by soaking treatments (three times of 1 sec, 8 sec and 1 sec) in $5\%$ (v/v) liquid smoke (Scansmoke PB 2110) after 30 min, 4 hrs and 22 hrs of hot-air drying, respectively. The histamine contents in 3 seasoned-dried products were in a 15.33-26.99 mg/l00g range. The water activities of 3 seasoned-dried products were 0.719-0.735 range, and the pH of T2 was lower than the others. In the comparison of POV and TBA values among products, the TBA values and POV of Tl and T2 were significantly low compared to C, and also the viable cell counts of T2 was relatively lower than those of the others. In the color values, significant changes were not found among products, and in the sensory evaluation for odor, taste and overall acceptance, T2 had relatively higher preference on the whole items.
재배조건에 따른 차이를 보기 위해 논에서 재배되는 논쌀 두종과 제주밭쌀의 특성과 중금속 함량을 비교하였다. 두 논쌀 중 아밀로오스 함량이 높은 논쌀 2와 제주밭쌀은 높은 페이스팅 온도와 낮은 최고 점성, 그리고 상대적으로 높은 셋백(setback)을 보였으나, 재배조건에 따른 차이를 보이지는 않았다. 제주밭쌀은 짙은 노란색과 낮은 점성을 보여 외관과 기계적 식미치에서 논쌀보다 낮게 평가되었다. 중금속 중 카드뮴과 납은 논쌀과 밭쌀의 차이를 보이지 않았으나, 총 비소함량의 경우 제주밭쌀은 논쌀의 10.1-17.9%에 해당하는 양을 보였다. 또한 제주밭쌀의 무기비소함량도 논쌀 2의 무기비소함량의 15% 정도에 불과한 것으로 나타났다. 논쌀을 침수, 취반, 뜨거운 물로 씻어내리기 등의 처리에 의해 무기비소 함량을 각각 34.1, 23.8, 17.5% 줄일 수 있는 것으로 나타났으나, 제주밭쌀의 경우 무기비소함량이 매우 적어 처리에 의한 유의적 차이는 발견되지 않았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.