• Biomolecules & Therapeutics
• /
• v.10 no.4
• /
• pp.258-267
• /
• 2002

In this study the general pharmacological profiles of AS6 on the central nervous system, cardiovascular and the other organs were investigated. The dosages given were 0, 250, 500 and 1000 mg/kg and drugs were orally administered. The animals used for this study were mice, rats and guinea pigs. Significant increases (p<0.01) in the charcoal transport capacity were observed at the high dose of 1000 mg/kg and significant increases in retardation of pain threshold were observed in the test using acetic acid in all dosed animals. However, AS6 showed no noticeable effects on general behavior, motor coordination, spontaneous locomotor activity, hexobarbital-induced sleep time, body temperature, analgesic activity in the test using hot plate method and anticonvulsant activity. Furthermore no noticeable effects were observed in cardiovascular functions in the isolated rat heart, contraction and relaxation of the smooth muscle in the isolated guinea ileum, gastric secretion and renal function.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.147.1-147.1
• /
• 2003

As an attempt to search for bioactive natural products exerting antiinflammatory activity, we have evaluated the anti-inflammatory and antinociceptive activities of the methanol extract from the Fomes fomentarius (MEFF). MEFF (50, 100 mg/kg/day, p.o.) significantly reduced an acute paw edema induced by carrageenan in rats. When analgesic activity was measured by acetic acid-induced writhing test and hot plate test, MEFF showed a dose-dependent inhibition in animal models. In addition, MEFF potently inhibited the LPS-induced production of NO, $PGE_2$ and TNF-$\alpha$production of macrophages. (omitted)

• The Korean Journal of Community Living Science
• /
• v.27 no.2
• /
• pp.295-304
• /
• 2016

This study was conducted to evaluate and compare the waterproofness and water vapor transport properties of 30 waterproof and breathable textiles in the market. MVTR upright cup test with water, MVTR inverted cup test with potassium acetate, and sweating hot plate test method were used for measuring the breathability of fabric samples. The waterproofness of all fabric samples and evaporative resistance of garment ensembles made with 5 selected waterproof and breathable textiles out of 30 samples were tested. The results of this study were as follows. The base fabrics of the most samples were basic weave structure with either polyester or nylon fiber. The waterproofness was over $5000mmH_2O$ for all the samples except densely woven fabrics. The evaporative resistance of garments that were made out of 5 fabric samples with a range of low to high breathability ranged $39.9{\sim}56.7m^2{\cdot}P{\cdot}W^{-1}$. The data of the water vapor transport properties of fabric samples varied with different test methods. Overall the bicomponent film fabrics showed better breathability and less standard deviation regardless of test methods. It is expected the breathability data without the information of test conditions used for marketing would confuse the consumers and the apparel manufacturers.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.4
• /
• pp.462-468
• /
• 2012

The present study was conducted with the object of examining how ST36 and LR3 electro acupuncture affects the injured side and the intact side in rats with sciatic nerve injury. For this study, we divided rats into a control group that were injured but not treated, experimental group I that were injured and had electro acupuncture on the intact side, experimental group II that were injured and had electro-acupuncture on the injured side, and experimental group III that were injured and had electro-acupuncture on both the intact side and the injured side, and performed behavioral and immunohistochemical tests. The results of this study are as follows. In the results of hot plate test, on Day 1 of experiment, experimental group I did not show a statistically significant difference but experimental group II and III showed a statistically significant difference, and on Day 2 and 3, all of experimental group I, II and III showed a statistically significant difference. In the results of SFI test, on Day 7 of experiment, experimental group I did not show a statistically significant difference but experimental group II and III showed a statistically significant difference, and on Day 14 and 21, all of experimental group I, II and III showed a statistically significant difference. In the results of immunohistochemical test, the expression of c-fos decreased gradually on Day 1, 2 and 3 in all the experimental groups, and the decrease was larger in the experimental groups that had electro-acupuncture than in the control group. In the results of immunohistochemical test, the expression of BDNF increased gradually on Day 7, 14 and 21 in all the experimental groups, and the expression was higher in the experimental groups than in the control group. Summing up the results, ST36 and LR3 electro acupuncture was effective when it was applied to the injured side and to both sides after sciatic nerve injury, but it was also effective in pain relief and nerve regeneration when it was applied to the intact side.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.311-315
• /
• 2013

Ribes fasciculatum (Saxifragaceae) has been widely used as a traditional medicine for the treatment of cough, antidote, cold, lacquer poison, and sore throat. In the present study, we evaluated the anti-nociceptive effects of ethyl acetate fraction of Ribes fasciculatum (ERF) in mice. Test results of tail-immersion test and hot plate test revealed that the ERF had strong anti-nociceptive activities on thermal nociception in a dose dependent manner, indicating ERF's anti-nociception on the central pain. Moreover, the acetic acid-induced chemical nociception was also significantly reduced by ERF treatment. This result shows that ERF may also work on the peripheral pain. We further performed formalin test to confirm ERF's anti-nociceptive properties and found that pain responses were significantly decreased by ERF treatment. Interestingly, in the combination test with naloxone, the analgesic activity of ERF was not changed, indicating that the opioid receptor was not involved in the ERF-mediated anti-nociception. These results indicate that ERF might be possibly used as a painkiller for the treatment of nociceptive pains.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1299-1308
• /
• 2003

This paper is studied to investigate the effect of slits and swirl vanes on the development of turbulent flow fields in gun-type gas burner with a cone type baffle plate because this gas burner is generally composed of eight slits and swirl vanes. All of turbulent characteristics including mean velocities were measured in the horizontal plane and cross section by using X-type hot-wire probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 l/min in the test section of subsonic wind tunnel. Slits cause the fast jets, and then they have the characteristic that the flow is not adequately spread to radial direction and has long flow length and very small flow velocity distribution in the central part. On the contrary, swirl vanes does not have long enough for adequate flow length to downstream because the rotational flow diffuses remarkably to radial direction. However, the suitable arrangement between slits and swirl vanes causes effective flow width and flow length, and then it promotes fast flow mixing over the entire region including central part to increase turbulence more largely and effectively. Therefore, it is thought as a very desirable design method in gun-type gas burner to locate slits on the outside of swirl vanes.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.258-265
• /
• 2014

By replacing the previous metal connector on the joints of timber structure, the GFRP reinforced laminated wooden pin was produced using a wooden material and Glass fiber reinforced plastic(GFRP) composite laminate. In addition, using the reinforced wooden pin, the tensile type shear strength test was conducted. Based on the result of the bending strength test of the reinforced laminated wooden pin according to the GFRP arrangement, a specimen(Type-A) with a single insertion of GFRP for each layer have shown the most favorable performance. Also, it was verified that densified specimen hot pressed for an hour at the temperature of $150^{\circ}C$ and with the oppression pressure $1.96N/mm^2$ have shown the improved performance of 1.57 times than the specimen without the densification. And in the bending strength test considering the load direction, edgewise have shown a higher performance of 3.51 times than the flatwise. A shear strength test was conducted using the Type-A reinforced laminated wooden pin which have shown a moderate performance on the test. Based on the test conducted by differentiating the type of the joint plate and the connector, compared to the specimen(Type-DS) applied with the drift pin and steel plate, the specimen( Type-WL) applied with the GFRP reinforced laminated wooden pin and GFRP reinforced wooden laminated plate have shown 1.12 times higher shear strength and also have shown an excellent toughness even after the maximum load.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.203-212
• /
• 2010

Water spray cooling has been widely used in a variety of industrial applications. The present study concentrated on quantitative measurements of the heat flux and heat transfer coefficient by water spray as it impinges on the rough surface of a hot steel plate at $900^{\circ}C$. A novel experimental technique was developed for a hightemperature heat flux gauge with a test block, cartridge heaters, and thermocouples that was used to measure the surface heat flux information on the hot steel plate for local heat flux measurements. The roles of the surface roughness on heat transfer are presented in this paper for well-characterized four rough surfaces with average rms roughness heights of $40-80{\mu}M$. The results show that the local heat transfer for rough surfaces is higher than that for a smooth surface. Heat transfer can be significantly increased by the presence of surface roughness elements, which can disrupt the thin thermal boundary layer. In addition, the heat transfer enhancement mechanism on a rough surface can be investigated by a different boiling regime.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.466-475
• /
• 2003

The gun-type gas burner adopted in this study is generally composed of eight slits and swirl vanes. Thus, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 $\ell$/min in the test section of subsonic wind tunnel. The axial mean velocity component in the case of burner model with only swirl vanes shows the characteristic that spreads more remarkably toward the radial direction than axial one, it does, however, directly opposite tendency in the case of burner model with only slits. Consequently. both slits and swirl vanes composing of gun-type gas burner play an important role in decrease of the speed near slits and increase of the flow speed in the central part of a burner because the biggest speed spurted from slits encircles rotational flow by swirl vanes and it drives main flow toward the axial direction. Moreover, the turbulent intensities and turbulent kinetic energy of gun-type gas burner are distributed with a fairly bigger size within X/R<0.6410 than burner models which have only slits or swirl vanes because the rotational flow by swirl vanes and the fast jet flow by slits increase flow mixing, diffusion, and mean velocity gradient effectively.

• Tribology and Lubricants
• /
• v.38 no.3
• /
• pp.93-100
• /
• 2022

Micro-light emitting diode (micro-LED) displays offer numerous advantages such as high brightness, fast response, and low power consumption. Hence, they are spotlighted as the next-generation display. However, defective LEDs may be created due to non-uniform contact loads or LED alignment errors. Therefore, a repair process involving the replacement of defective LEDs with favorable ones is necessitated. The general repair process involves the removal of defective micro-LEDs, interconnection material transfer, as well as new micro-LED transfer and bonding. However, micro-LEDs are difficult to repair since their size decreases to a few tens of micron in width and less than 10 ㎛ in thickness. The conventional nozzle-type dispenser for fluxes and the conventional vacuum chuck for LEDs are not applicable to the micro-LED repair process. In this study, transfer conditions are determined using a micro stamp for repairing micro-LEDs. Results show that the aging time should be set to within 60 min, based on measuring the aging time of the flux. Additionally, the micro-LEDs are subjected to a compression test, and the result shows that they should be transferred under 18.4 MPa. Finally, the I-V curves of micro-LEDs processed by the laser and hot plate reflows are measured to compare the electrical properties of the micro-LEDs based on the reflow methods. It was confirmed that the micro-LEDs processed by the laser reflow show similar electrical performance with that processed by the hot plate reflow. The results can provide guidance for the repair of micro-LEDs using micro stamps.