• 설비공학논문집
• /
• 제12권10호
• /
• pp.886-893
• /
• 2000

A good understanding of the heat transfer distribution is very important to suppress the deformation of steel products. In this study, the local heat transfer coefficients are experimentally investigated to understand the heat transfer distribution of thick steel plates with even flat spray nozzle. The steel slabs are cooled down from the initial temperature of about $1000^{\circ}C$ , and the local heat transfer coefficients and surface temperatures are calculated from the measured temperature-time history. The results show that the local heat transfer coefficients of spray cooling are dominated by the local droplet flow rate, and in proportion to becoming more distant from the center of heat transfer surface, the local heat transfer coefficients decrease with the decrease of the local droplet flow rate.

• 약학회지
• /
• 제23권1호
• /
• pp.11-16
• /
• 1979

Benorylate and ethoxybenzamide have been used alone or in combination as an analgesic, antipyretic and antiinflammatory agent. We investigated the significance of the differences of analgesic activities between single and concurrent administration of benorylate and ethoxybenzamide and lorazepam in mice and also antipyretic activity between single and concurrent administration of benorylate and ethoxybenzamide in rats. 1). Concurrent administration of each half dose of benorylate and ethoxybenamide showed much inhibiting effect on the acetic acid-induced writhing syndrome of mice than the above drug alone, and the some increased analgesic response by hot plate method. 2). The synergistic and analgesic effect of combined administration of benorylate and lorazepam was found to be significant. 3). Antipyretic effect of half-dose combined administration of benorylate and ethoxybenzamide on the rat pyrexia induced by yeast(s.c.) and T.T.G. (i.v.) was shown to be similar to the effect of each drug.

• Advances in Traditional Medicine
• /
• 제6권2호
• /
• pp.157-160
• /
• 2006

Chandanasav is an Ayurvedic preparation slightly reduced the gastrointestinal motility at the 15 min time interval. It increased the latent period of castor oil induced diarrhoea, slightly decreased number of stool count and lowered the purging index values. Chandanasav significantly reduced the onset and increased the duration of pentobarbital induced sleeping time. No significant analgesic effect was observed from the hot plate study Thus it may have mild constipating and central nervous system depressant activity without any effect on peripheral nervous system.

• Carbon letters
• /
• 제13권1호
• /
• pp.48-50
• /
• 2012

Mass production of graphene-based materials, which have high specific surface area, is of importance for industrial applications. Herein, we report on a facile approach to produce thermally modified graphene oxide (TMG) in large quantities. We performed this experiment with a hot plate under environments that have relatively low temperature and no using inert gas. TMG materials showed a high specific surface area (430 $m^2g^{-1}$). Successful reduction was confirmed by elemental analysis, X-ray photoelectron spectroscopy, thermogravimetic analysis, and X-ray diffraction. The resulting materials might be useful for various applications such as in rechargeable batteries, as hydrogen storage materials, as nano-fillers in composites, in ultracapacitors, and in chemical/bio sensors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1481-1486
• /
• 2004

This report presents experimental results on the heat transfer coefficients in the boiling region of spray cooling for actual metallurgical process. In this study, the heat flux distribution of a two dimensional dilute spray impinging on hot plate was experimentally investigated. Based on the experimental results, they classified the heat transfer area into the stagnation region and wall-flow region. In the stagnation region, the local heat transfer coefficient relates mainly to the droplet-flow-rate supplied from spray nozzle directly, so the local heat transfer coefficients is good agreement with the predicted values from correlation for spray cooling proposed by former report However, the local heat transfer coefficient in wall-flow region is larger than predicted values, and it is found that the rebounding droplets-flow-rate must be accurately evaluated to predict the local heat transfer coefficient in this region.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.345-350
• /
• 2008

The present study has been conducted to develop a heat recovery system for a 1 MW class gas engine based cogeneration system. In the cogeneration system, heat is recovered from two parts, which are jacket water and exhaust gas. The heat from the jacket water is recovered by a plate type heat exchanger and used for the room heating and/or hot water supply. The heat from the exhaust gas is used to generate steam. For both of the heat recovery devices, 1/5 scaled tests are performed and the data are compared to the conventional correlations for the design.

• 한국자원식물학회지
• /
• 제20권3호
• /
• pp.221-225
• /
• 2007

The plant Ligularia fischeri var. spiciformis (Compositae) is a candidate for available functional foods. It has been used to treat diabetes mellitus and rheumatoid arthritis. We have reported the isolation of a new eremophilanolide named 6-oxoeremophilenolide and cytotoxic intermedeol together with the isolation of hydrophilic constituents, chlorogenic acid, 3,4-di-O-caffeoylquinic acie (3), and 5-O-[1-butyl]-3,4-di-O-caffeoylquinic acid. Compound 3 was again isolated by combination of silica gel- and ODS column chromatography for the anti-nociceptive action. Compound 3 and 4 were assayed in hot plate- and writhing tests in the rat. Although the three derivatives of caffeic acid exhibited significant anti-nociceptive effects at 10 mg/kg dose (i.p.),(activity potency: 4>3). These results suggest that compound 3 is responsible for at least rheumatoid arthritis, and caffeic acid moiety is the active moiety of dicaffeoylquinic acid.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.448-451
• /
• 2000

The purpose of this study is to manufacture and test a thermoelectric generator which converts unused energy from close-at-hand sources, such as garbage incineration heat and industrial exhaust, to electricity. A manufacturing process and the properties of a thermoelectric generator are discussed before simulating the thermal stress and thermal properties of a thermoelectric module located between an aluminum tube and alumina plate. We can design the thermoelectric modules having the good properties of thermoelectric generation. Resistivity of thermoelectric module for thermoelectric generation consisting of 62 cells was 0.15-0.4$\Omega$ Developed thermoelectric modules can be expected th have better properties than thermoelectric cooling modules above $70^{\circ}C$ in temperature difference between hot and cold ends.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1675-1677
• /
• 2005

In case of attaching thermoelectric module and heat source, the polymer sheet is attached on the $AL_{2}O_3$ plate, which Is cold and hot side of thermoelectric module, in order to enhance mechanical safty of the system. It is impossible to calculate the exact distribution of temperature and flow pattern of inner gap of thermoelectric module. Therefore CFD(Computational Fluid Dynamics) analysis was executed to determine the thermo-fluid phenomena and distribution by Fluent. As the result of these analysis, heat transfer was dominated by conduction and the difference of temperature was linear distribution according to the thickness of polymer sheet.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.429-435
• /
• 1998

Experiments were conducted to investigate the turbulent flow characteristics from on oblique impingement surface to an plane jet at the jet Reynolds number(Re based on the nozzle width) $3{\times}10^4$ The jet mean velocity and turbulent intensity profiles have been measured along the impingement surface by hot-wire anemometer. The nozzle-to-plate distance(H/B) ranged from 2 to 10 and the oblique angle (a) from 45 to 90 degree. Also the secondary peak of the turbulent intensity was observed at H/B=4 S/B 5 and a=90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreased and the position of the stagnation point nearly coincided with that of the maximum turbulent intensity.