• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.91-99
• /
• 1994

We used CMOS current mirror and differenial amplifier to find out how the degradation of each devices in circuit affect total circuit performance. The devices in circuit wer degraded by hot-carrier generated during circuit operation and total circuit performance were changed according to the change of each device parameters. To examine the circuit performance phenomena of current mirror, we analyzed three diffent kinds of current mirrors and made correlation model between circuit performance and stressed device parameters, and compare hot-carrier immunity of these circuits. Also we analyzed how the performance of differential amplifier degraded from the initial value after hot-carrier stress incircuit operations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2573-2578
• /
• 2007

In order to investigate the vortex body frame interaction around the side mirror of a passenger car, velocity vector fields in the wake, pressure distributions and boundary layer flows over both the mirror surface and the mirror housing, have been measured by several experimental tools. It was resulted that only within an half downstream distance of the mirror span there appears the recirculation zone, and also found that vortex trail towards to the driver side window between A and B pillars, making the acoustic noise and vibration. Wake vortex rolls up after this recirculating zone and makes the trail of the vortex center towards the driver side window, which was also confirmed by measurements of wake velocity vectors in the vertical sections of the trail and visualization over the side mirror surfaces as well. It was also observed that total pressure distribution over the mirror surface has the minimum peak near the lower tip region which can be considered as the origin of the vortex center. It can be concluded that the geometrical modification of the lower tip and the upper root area of the mirror housing is the key to control the wake vortex.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• 광학세계
• /
• 제7권3호통권37호
• /
• pp.64-67
• /
• 1995

• 에너지공학
• /
• 제23권4호
• /
• pp.56-60
• /
• 2014

태양추적 장치에 장착된 집광기를 이용하여 획득한 고밀도의 태양광에너지는 적외선 범위 및 가시광선 범위의 두 파장 영역으로 분리할 수 있다. 적외선 범위의 파장은 열음향 시스템으로 활용할 수 있으며, 가시광선 범위의 파장은 조명시스템을 통하여 실내 태양광 조명에 활용할 수 있다. 즉, 집광된 태양광은 2차 반사경을 통해 광분리 장치로 입사되며, 입사된 태양광은 Hot mirror를 통하여 가시광선 영역과 적외선 영역으로 분리된다. 본 연구에서는 자연 태양광 및 실내의 인공광원을 대상으로 분리 실험을 하였다. 실내 광원 발생장치 실험에서 분리된 인공광원이 가시광선 영역의 파장은 400m부터 720m 범위이며, 적외선 영역의 파장은 620m부터 940m 범위이다. 또한, 태양추적 장치의 집광된 태양광을 통한 실험에서 가시광선 영역의 파장은 460m부터 680m 범위를 보이며, 적외선 영역의 파장은 620m부터 940m 범위인 것을 확인하였다.

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.199-203
• /
• 2017

Hot embossing techniques are used to engrave patterns on plastic substrates. Roll based hot embossing uses a heated roll for a continuous process. A heated roll with relief patterns is impressed on a preheated plastic substrate. Then, the substrate is cooled down quickly to prevent thermal shrinkage. The roll speed is normally very slow to ensure substrate temperature increase up to the glass transition temperature. In this paper, we propose a noncontact preheating technique using focused infrared light. The infrared light is focused as a line beam on a plastic substrate using an elliptical mirror just before entering the hot embossing roll. The mid range infrared light efficiently raises the substrate temperature. For preliminary tests, substrate deformation and temperature changes were monitored according to substrate speed. The experiments show that the proposed technique is a good possibility for high speed hot embossing.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.313-320
• /
• 1987

Fracture toughness of hot pressed cordierite-SiC whisker ceramic composites contained up to 40vol.% SiC whiskers were determined by using the indentation crack length(IC), indentation strengthin-bending(IS), and single-edge notched-beam(SENB) methods. The results were compared to stress intensity factor, KB, at the crack branching boundary measured by using the mirror zone radius (MZ) method. IS method seems to provide a more reasonable estimation of fracture toughness than other methods for these composites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.110-111
• /
• 2008

Diamond material were manufactured using electrical pyrolysis method and hot filament method. Surface morphology was observed with SEM and its microstructure was investigated using Raman spectroscopy. The accumulation of the particles was observed to have strong selective and to deposit at the substrate only on the roughly polished steel surface compared to the mirror polished implying that the particle was a charged.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.56-61
• /
• 1996

두 개의 증발료가 설치된 hot wall epitaxy 장치를 제작하고 GaAs 기판위에 undoped ZnSe 박막을 성장하였다. 기판온도 $350^{\circ}C$, 원료부의 온도 $660^{\circ}C$ 근방에서 성장된 경 연박막의 XRD 측정값은 175 $sec^{-1}$의 반치폭을 냐타내 였다. Photoluminescence 측정 결과 neu t tral acceptor bound exciton emission line이 강하게 얻어지는 양질의 박막을 성장하였다.

• 한국광학회지
• /
• 제34권3호
• /
• pp.106-116
• /
• 2023

본 논문에서는 가시광선과 원적외선 전반의 파장대역에 걸쳐 사용 가능한 동축 듀얼카메라를 설계 및 분석하였다. 광학계는 빔 스플리터를 이용한 동축광학계 시스템으로 설계되었으며, 가시광선 광학계에서 적외선으로 인한 열 전달을 최소화하기 위해 hot mirror 타입의 빔 스플리터를 사용하였다. 원적외선 카메라는 비냉각형 검출기로 640×480의 센서 배열을 가지고, 가시광선은 1,945×1,097의 센서를 사용한다. 최적화 과정을 거친 후 최종 설계된 광학계의 정합도는 90% 이상이며, 기존에 존재하던 듀얼카메라에 비해 정합도가 향상된 효율적인 설계 결과를 얻었고, 테스트를 통해 향상된 정합도를 확인하였다.