• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1769-1785
• /
• 2021

The Integral Pressurized Water Reactors (IPWRs) as the innovative advanced and generation-III + reactors are under study and developments in a lot of countries. This paper is aimed at the thermal hydraulic study of the hot and average fuel sub-channel in a Generation III + IPWR by loose external coupling to the neutronic simulation. The power produced in fuel pins is calculated by the neutronic simulation via MCNPX2.6 then fuel and coolant temperature changes along fuel sub-channels evaluated by computational fluid dynamic thermal hydraulic calculation through an iterative coupling. The relative power densities along the fuel pin in hot and average fuel sub-channel are calculated in sixteen equal divisions. The highest centerline temperature of the hottest and the average fuel pin are calculated as 633 K (359.85 ℃) and 596 K (322.85 ℃), respectively. The coolant enters the sub-channel with a temperature of 557.15 K (284 ℃) and leaves the hot sub-channel and the average sub-channel with a temperature of 596 K (322.85 ℃) and 579 K (305.85 ℃), respectively. It is shown that the spacer grids result in the enhancement of turbulence kinetic energy, convection heat transfer coefficient along the fuel sub-channels so that there is an increase in heat transfer coefficient about 40%. The local fuel pin temperature reduction in the place and downstream the space grids due to heat transfer coefficient enhancement is depicted via a graph through six iterations of neutronic and thermal hydraulic coupling calculations. Working in a low fuel temperature and keeping a significant gap below the melting point of fuel, make the IPWR as a safe type of generation -III + nuclear reactor.

• 한국방사선학회논문지
• /
• 제7권5호
• /
• pp.365-369
• /
• 2013

PET(positron emission tomography)을 촬영하기 위해서는 방사선 의약품 동위원소를 사용하여 인체 내에 정맥주사를 한다. 이 경우 대표적으로 사용하는 방사선 의약품은 $^{18}FDG$ (Fluorodeoxyglucose)이다. 의료용 싸이크로트론으로 생산하는 $^{18}F$에 deoxyglucose를 합성하기 위해서 합성용 카세트장치가 필요하다. 방사성 의약품 제조시에는 많은 양의 2차 방사선이 발생이 된다. 따라서 2차 방사선을 차폐하기 위하여 핫셀(Hot cell)을 사용한다. 우리는 $^{18}FDG$ 합성 또는 분배시에 핫 셀 외부로 유출되는 선량을 측정하였다. 이번 실험은 $^{18}FDG$ 제조 작업시에 의도하지 않게 발생할 수 있는 방사선 작업종사자의 피폭에 관한 선량정보를 제공하기 위함이다. 결론적으로 핫셀 내부에서 외부로 $^{18}FDG$ 합성시에 선량이 유출됨을 확인 할 수 있었다. 특히 핫셀에서 핫셀 내부를 볼 수 있는 납유리에서 외부로 방사선이 유출되는 것을 알 수 있었다. 결론적으로 $^{18}FDG$ 합성시 방사선 작업종사자의 피폭선량을 감소하기 위해서는 핫셀 존재하는 납유리의 개선점이 필요할 것으로 사료된다.

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.169-176
• /
• 2002

To study of binder and fine aggregate a lot of replacement fly-ash concrete, initial characteristics, standard environment of curing temperature $20^{\circ}C$, hot-weather environment, cold weather environment of curing temperature $5^{\circ}C$. Flash concrete tested slump, air contest, setting and Hardening concrete valuated setting period of form, day of age 3, 7, 28 compression strength in sealing curing. Underwater curing specimen compression strength of age 3. 7, 28day used strength change accordingly fly-ash concrete curing temperature. Purpose of study is consultation materials in field that variety of fly-ash replacement concrete mix proportion comparison and valuation. (1) Setting test result, fly-ash ratio of replacement higher delay totting time. Same volume of fly-ash ratio of replacement is lower fly-ash ratio of replacement fine aggregate delay setting time. Setting test in curing temperature $35^{\circ}C$ over twice fast setting in curing temperature $20^{\circ}C$ and all specimen setting delay in curing temperature $5^{\circ}C$. F40 specimen end of setting about 30 time. (2) Experiment result age 28day compression strength more fisher plan concrete then standard environment in curing temperature $20^{\circ}C$, cold weather environment in curing temperature $5^{\circ}C$, most strength F43 is hot-weather environment in curing temperature $35^{\circ}C$ replacement binder 25%, fine aggregate 15%. (3) Hot-weather environment replacement a mount of fly-ash is a same of plan concrete setting period of form. Age 28day compression strength replacement a mount of fly-ash more hot-weather concrete then plan concrete.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.109-113
• /
• 2002

Steel industry is the most capital intensive and the largest energy consuming industry, which operate huge and complex facilities to supply various steel products as the primary materials to almost every manufacturing industry Major steel products are hot-rolled and cold-rolled coils, plates, and wires that are produced through molten iron making, molten steel making, casting, and rolling. Each process runs in batch between setups and the specifications or bach are different with each other High energy consuming and heavy material handling require careful synchronization or processes, as well. Considering the synchronization or processes, the lot planning and scheduling problem in the integrated steelmaking process rovers the roll grouping with given casts. the sequencing or rolls over time, and the machine assignment and time scheduling or charges and casts. The problem is investigated by dividing it into two cases whether single or parallel machines at the molten steel making and the continuous casting processes. Problem descriptions and solution approaches or each instance are introduced. To test their performance and conformity, implementation or the algorithms and numerical experiments are carried out with real world and constructed data sets.

• 한국CDE학회논문집
• /
• 제3권4호
• /
• pp.251-259
• /
• 1998

Currently a hot potato in industries is to reduce the lifecycle of product and maximize the time-to-market benefits. A lot of methodologies and the concrete systems are in use for performing this function. One of these systems is that process are reconstructed by BPR and systems are implemented by PDM. First of all, th analyses of existing product, process and resource data must be preceded. New process is established on the basis of the analyzed information of a company and PDM implements the new process in the company. The consecutive activities like this provide the basic environment for CIM. However, the current system have been developed on the favor of a big company. There are many problems in applying it too a mid-sized company. A lot of function in a PDM tool is not necessary for the mid-sized CIM characteristic. The purpose of this study is to define the ROPP information model that is an appropriate information integration for a design process. The model shows an associated complicated information of a company effectively. Also the modeler makes it possible to manage consistently the constraints of design process on the basis of the analysis of dependency among each resource.

• 대한전자공학회논문지SD
• /
• 제43권3호
• /
• pp.9-14
• /
• 2006

본 논문에서는 NBTI 특성 개선을 위한 새로운 BEOL 공정을 제안하였다. 우선 BEOL의 마지막 공정인 수소 금속소결 열처리 공정, 보호막 공정 등이 NBTI에 많은 영향을 끼침을 분석하였다 이를 바탕으로 수소 금속소결 대신 질소 금속소결 공정을 적용하고 보호막 층, 특히 PE-SiN 증착 전에 질소 금속소결공정을 실시하여 NBTI 수명시간을 개선하였다. 제안한 방법을 적용하여도 소자 특성이나 NMOS의 HC 특성이 열화 되지 않음을 분석하여 실제 소자에 적용될 수 있음을 증명하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.57-65
• /
• 1999

This document illustrates the way to control of coiling temperature(CTC) of stip tail part in minimill process. The coiling temperature (CT) is very important fact in hot rolling process because the mechnical properties of strip depend on it. In mini-mill pocess, the speed pattern of rolling is different from that of conventional hot rolling. We have a lot of difficulties in controlling the coiling temperature at strip tail part, because after the strip tail is passed out the final stand, it's impossible to control the coiling temperature by using coiling speed. So we have CT deveiation in this gauge, about 160$^{\circ}C$ below in comparison with target CT. It's clear that deviation of mechanical properties(tensile strength, vield ratio etc) of strip to direction of length is so large, so we could not produce middle carbon steel, like this temperature condition. New coiling temperature control of strip especially in strip tail was developed. An innovative method for calculate the deceleration speed of strip tail has been implemented in CTC program, so called

• 한국건설관리학회논문집
• /
• 제7권2호
• /
• pp.71-80
• /
• 2006

건축물이 대형화, 고층화되는 현 상황에서는 재건축의 효용성이 감소되므로 구조물의 수명연장을 위한 콘크리트 품질관리의 체계적인 연구가 필요하다. 콘크리트는 시멘트의 수화 반응에 의해 강도가 발휘되며 온도에 따른 품질변화가 매우 큰 재료로서 한중과 서중 같은 시공환경에서 품질문제가 많이 유발된다. 특히 서중환경에 대해서는 콘크리트 표준시방서와 현장별 특기시방서 및 시공계획서 등으로 현장을 관리하고 있으나, 이에 대한규정이 명확하지 않아 현장별로 뚜렷한 기준 없이 임의로 시공되어 품질이 일정하지 않고 각종 하자가 발생하는 실정이다. 이에 서중 환경이 콘크리트의 시공환경과 어떤 관련성이 있는지에 대해 전국 8개 대도시의 기상자료를 중심으로 적용기간과 일수를 조사하고 분석한 결과 대구가 가장 긴 지역으로 판명되었다. 따라서 이 지역의 콘크리트 양생공정에 대한 현장 품질관리 실태를 조사하여 품질관리상 문제점을 파악하고, 그 해결방안이 될 기초 자료를 도출하였다. 또한, 서중 콘크리트 시공에 있어 현장별로 상이하게 적용되고 있는 양생공정의 품질관리 기준을 통합하여 균일한 품질 확보와 하자발생을 줄이기 위해 현장에서 가장 시급히 보완되어야 할 부분에 대한 현장시험과 품질관리 항목의 분석을 통하여 서중 환경시 양생공정의 시공지침과 시공계획서 작성에 필요한 콘크리트 품질관리에 관하여 연구한 논문이다.

• 한국연초학회지
• /
• 제35권1호
• /
• pp.1-6
• /
• 2013

Near InfraRed Spectroscopy(NIRS) is a quick and accurate analytical method to measure multiple components in tobacco manufacturing process. This study was carried out to develop calibration equation of near infrared spectroscopy for the prediction of the amount of chemical components and hot water solubles(HWS) of reconstituted tobacco leaf. Calibration samples of reconstituted tobacco leaf were collected from every lot produced during one year. The calibration equation was formulated as modified partial least square regression method (MPLS) by analyzing laboratory actual values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with the standard error of prediction(SEP) of chemical components in reconstituted tobacco leaf samples, indicated as coefficient of determination($R^2$) and prediction error of sample unacquainted, followed by the verification of model equation of laboratory actual values and these predicted results. As a result of monitoring, the standard error of prediction(SEP) were 0.25 % for total sugar, 0.03 % for nicotine, 0.03 % for chlorine, 0.16 % for nitrate, and 0.38 % for hot water solubles. The coefficient of determination($R^2$) were 0.98 for total sugar, 0.97 for nicotine, 0.96 for chlorine, 0.98 for nitrate and 0.92 for hot water solubles. Therefore, the NIRS calibration equation can be applicable and reliable for determination of chemical components of reconstituted tobacco leaf, and NIRS analytical method could be used as a rapid and accurate quality control method.

• 한국의사학회지
• /
• 제19권2호
• /
• pp.29-47
• /
• 2006

Because the size of population was directly related to the power of the nation in the Chosun Dynasty, various efforts were exerted to maintain the size stable and the keys to the efforts were a high birth rate and a low death rate. However, in addition to wars, epidemic diseases had an enormous effect on the death rate. Particularly during the mid Chosun Dynasty, epidemic diseases were more prevalent than ever due to the abnormal climate called the little ice age. To cope with them, the government executed several medical relief policies and published medical books. In Chinese epidemiology, infectious diseases mean sicknesses caused by hot weather, but in Korean epidemiology, they indicate large-scale infectious sicknesses caused by both hot and cold weather. Therefore, as treatment methods for diseases from the cold were not applicable to the pathology of epidemic diseases, China developed separate epidemiology. In Korea, however, the main concern was how to prevent epidemic diseases, whether from hot or cold weather, that drove many lives into death. The characteristics of Korean epidemiology are as follows. First, whenever epidemic diseases were prevalent, in order to cope with them, translated medical books were promptly published including Ganibyeokonbang, Bunmunonyeokihaebang, Sinchanbyeokonbang, Byeokyeoksinbang and Byeokonsinbang. Second, those books were annotated in Korean so that people could read easily and accurately. Third, as an extension of the Hyangyak movement from the late Koryo Dynasty, Danbang was used a lot to treat and prevent epidemic diseases with less financial burden, and things obtainable easily according to individuals' situation were mentioned for anybody to overcome the emergent situation of epidemic diseases. Fourth, methods for praying to God were suggested for practitioners to work with sincere spirit and to keep themselves from epidemic diseases.