• Journal of Nutrition and Health
• /
• 제28권11호
• /
• pp.1091-1099
• /
• 1995

The cyutotoxic effects of hot water soluble polysaccharides extract(PS) from the mushroom, Lentinus edodes, and in combinations with vitamin A or vitamin E on life span of ICR mice bearing P388 cancer cells and in vitro against P388 cancer cells were examined. The chemical components of PS and fractions were analyzed and survival time and cell number of P388 treated with extract fractions with and without vatamin A or E supplementation were also measured. The results obtained were summarized as follows; The extract of fraction B was shown to have the highest antitumor activity against P388 implanted in ICR mice. The antitumor fraction B was consisted of 82.0% of polysaccharide and 4.2% of protein. All three fractions seemed to have in vivo antitumor activity against P388, and fraction B showed the highest activity, In vitro P388 cell growht was inhibited 76%, 89%, 54% by the addition of fraction A, B and C respectively. Vitamin A or E did not appear to have any accelerating effects on either in vivo or in vitro cell cytotoxicity when each of them was combined with the PS and fractions. All three fractions contained more than 68% of polysaccharides. The fraction B showed the highest value of 88% in polysaccharides. Monsaccharides of the fraction B were identified as galactose(59.1%), glucose(29.2%), fructose(2.8%) and uronic acid(4.2%). Hydrolysis of protein from the fraction B was didentifed to have 17 kinds of defined and 5 undifined amino acids. The inhibitory effects of the hot water extracts from mushroom against cancer cell growth of P388 were stronger than the control group. And the survival time of ICR mice was shown to be 161% between the control group and the experimental groups.

• 대한약침학회지
• /
• 제14권3호
• /
• pp.81-90
• /
• 2011

Objectives : Angelicae Gigantis Radix has been known traditional medicine with antimicrobial activities and it has been widely used for treatment of blood and inflammatory diseases. In the present study, some studies examined anti-inflammation effects of Angelicae Gigantis Radix but they usually were performed by ethanol extracted Angelicae Gigantis Radix pharmacopuncture. So We investigated the inhibitory effects of Angelicae Gigantis Radix pharmacopuncture by hot water and ethanol extract on Nitric oxide(NO) and Prostaglandin $E_2$($PGE_2$) production in lipopolysaccharide(LPS) induced macrophage cell. Methods : Angelicae Gigantis Radix was extracted by ethanol and hot water. Cell viability was determined by MTT assay. To evaluate anti-inflammation effects of Angelicae Gigantis Radix pharmacopuncture, we examined NO and $PGE_2$ production in LPS induced macrophages. The concentrations of NO and $PGE_2$ were measured by Griess assay and Enzyme Immuno-Assay. Results : 1) The MTT assay demonstrated that cytotoxic effect of Angelicae Gigantis Radix pharmacopuncture by hot water extract and ethanol extract in RAW 264.7 macrophage cells were not appeared. 2) Angelicae Gigantis Radix pharmacopuncture by ethanol extract and hot water extract inhibited NO production in LPS induced macrophages significantly. 3) Angelicae Gigantis Radix pharmacopuncture by ethanol extract tended to inhibiting $PGE_2$ production in LPS induced macrophages. And Angelicae Gigantis Radix pharmacopuncture by hot water extract inhibited LPS induced production of $PGE_2$ in RAW 264.7 macrophage cells significantly. Conclusions : This study suggests that Angelicae Gigantis Radix pharmacopuncture may have an anti-inflammatory property through the inhibition of NO and $PGE_2$ production in LPS induced macrophages. It may have a therapeutic potential for the treatment of various inflammatory diseases.

• 한국약용작물학회지
• /
• 제19권5호
• /
• pp.362-367
• /
• 2011

The study was conducted to investigate functional materials as skin whitening and anti-inflammatory agent from Taraxacum officinale and Taraxacum coreanum. The total polyphenol and flavonoid content in the ethanol extract of Taraxacum officinale were found to be 64.07mg/g and 32.46mg/g, respectively. In tyrosinase inhibitory activity, the hot water extract of Taraxacum coreanum was higher than the other extracts. However, in nitric oxide (NO) scavenging ability, the ethanol extract of Taraxacum coreanum was higher than the other extracts. the ethanol extract of Taraxacum coreanum showed strong NO production inhibitory effect in lipopolysaccharide (LPS)-stimulated Raw 264.7 cell. In the cell viability measurement by MTT assay and the lactate dehydrogenase (LDH) assay against L929 cell, the extracts were exhibited fine cell viabilities and normal LDH release levels as nontoxic result in sample concentration of $250{\sim}1000{\mu}g/m{\ell}$. As a result, the ethanol extract and the hot water extract of Taraxacum coreanum could be applicable to functional materials for anti-inflammatory and skin whitening related fields, respectively.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.438-446
• /
• 2003

This paper presents the development of the remotely operated decontamination systems for use in a highly radioactive zone of the DUPIC Fuel Development facility of the Irradiated Material Examination Facility at the Korea Atomic Energy Research Institute. The remotely operated decontamination systems were designed to completely eliminate human interaction with hazardous radioactive contaminants. These decontamination systems are mainly classified into three systems depending on the task environment - a fabrication equipment decontamination system, a hot-cell floor decontamination system, and an isolation room floor decontamination system. A decontamination system for contaminated fabrication equipment utilizes dry ice pellet blasting method to decontaminate contaminated surface of the equipment. The decontamination systems for the hot-cell floor and isolation room floor employ a vacuum cleaning method to decontaminate the contaminated floor and collect loose dry spent nuclear fuel debris and other radioactive waste placed on the floor. The human operator from the out-of-cell performs a series of decontamination tasks remotely by manipulating decontamination systems located in-cell via a handcontroller with the aid of vision feedback information. The environmental, functional and mechanical design considerations, control system and capabilities of the remotely operated decontamination systems at a high radioactive environment are also described.

• 생약학회지
• /
• 제52권3호
• /
• pp.149-156
• /
• 2021

Excessive glutamate can cause oxidative stress in neuronal cells and this can be the reason for neurodegenerative disease. In this study, we investigated the protective effect of Spirulina maxima hot ethanol extract on mouse hippocampal HT22 cell of which glutamate receptor has no function. HT22 cells were pre-treated with S. maxima sample at a dose dependent manner (1, 10 and 100 ㎍/ml). After an hour, glutamate was treated. Cell viability, reactive oxygen species (ROS) accumulation, Ca²⁺ influx, decrease of mitochondrial membrane potential level and glutathione related assays were followed by then. S. maxima ethanol extract improved the cell viability by suppressing the ROS and Ca²⁺ formation, retaining the mitochondrial membrane potential level and protecting the activity of the antioxidant enzymes compared with group of vehicle-treated controls. These suggest that S. maxima may decelerate the neurodegeneration by attenuating neuronal damage and oxidative stress.

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.155-160
• /
• 2009

This study was attempted to quality characteristics of ginseng powder using molecular press dehydration(MD) method. Ginseng powder was dried using maltodextrin as dehydrating agents, and the quality of the ginseng powder was compared with that of freeze-drying and hot air-drying samples in terms of colors, moisture contents and grain size. The colors of ginseng powder using MD-drying and freeze-drying was better than hot air-dried ginseng powder. The moisture contents of ginseng powder using MD-drying was 9.49%, while freeze-drying was 4.14% and hot air-drying 11.71% after 72ball mill times. The grain size of ginseng powder using MD-drying and freeze-drying was better than hot air-drying ginseng powder. These results suggest that drying of ginseng powder using molecular press dehydration method is very efficient, because minimal cell destruction may be achieved.

• 한국식품영양학회지
• /
• 제14권4호
• /
• pp.333-338
• /
• 2001

In research. which Korean pickled cucumber was treated wish various methods, including blanching. brining in hot solution, and treating with trehalose. I examined the changes of properties of material. The Korean pickled cucumber were fermented 4∼5$^{\circ}C$ for 42 days in 1% salt solution. The physiochemical properties were pH, total acidity, total cell count, lactic acid bacteria and texture properties were also evaluated. The result showed that the effect of blanching and soaking cucumber in 100$^{\circ}C$ hot salt solution significantly reduced the softening rate of texture while a rather rapid fermentation was found for those preserved with salt. The effect of trehalose treatment inhenced fermentation but it was significantly reduced softening rate of texture. The texture evaluation of Korean pickled cucumber was found that heat treatment with blanching after soaked in hot solution and trehalose treatment had a positive effect for reduction of softening of cucumber tissue.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.66-69
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon$({\mu}c-Si:H)$ films prepared by hot wire chemical vapor deposition at substrate temperature below $300^{\circ}C$. The $SiH_{4}$ concentration$[F(SiH_{4})/F(SiH_{4})+F(H_{2})]$ is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}c-Si:H$ films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}c-Si:H$ films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of $B_{2}H_{6}$ to $SiH_{4}$ gas. The solar cells with structure of Al/nip ${\mu}c-Si:H$/TCO/glass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.387-390
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}$c-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below 300$^{\circ}C$. The SiH$_4$ concentration[F(SiH$_4$)/F(SiH$_4$).+(H$_2$)] is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}$c-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}$c-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of B$_2$H$\_$6/ to SiH$_4$ gas. The solar cells with structure of Al/nip ${\mu}$c-Si:H/TCO/g1ass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.141-148
• /
• 2017

A process comprising a hot extrusion process and a warm forging process was designed to form a T-shaped aluminum structural component with a high degree of difficulty by the plastic forming method. A circular cylindrical part was extruded with a hot extrusion process, and then an embossing part was formed with a warm forging process. The formability and the maximum load required for forming were then determined using a forming analysis program. The hot extrusion process was executed at $450^{\circ}C$ under the extrusion speed at 6 mm/s, while the warm forging process was executed at $260^{\circ}C$ under the forging speed at 150 mm/s. For both the processes, a condition by which friction would not be generated between the mold and the material was implemented. The analysis results showed that the load required for hot extrusion was 1,019 tons, while the load required for the warm forging was 534 tons. The T-shaped part was manufactured by using a 1,600 tons capacity press. The graphite lubricant was coated on the mold as well as the material. A forming experiment was performed under the same condition with the analysis condition. The measured values from the load cell were 1,210 tons in the hot extrusion process and 600 tons in the warm forging process.