• 인간식물환경학회지
• /
• 제22권5호
• /
• pp.489-503
• /
• 2019

This study aimed to analyze the preference of subfertile women for forest therapy programs depending on their emotional characteristics, and to provide basic data for the development of forest therapy programs in order to promote the mental health of subfertile women. Among the surveyed emotional characteristics of subfertile women, the level of emotions including pressure to become pregnant, impatience and frustration were high, while that of emotions including anxiety and fear; depression, hopelessness, helplessness, loneliness and sadness tended to be medium. The level of emotions including shame and guilt tended to be low. The top six forest therapy programs preferred by subfertile women include a deep breath of air /phytoncide, forest bathing/wind bathing/sun bathing, self-esteem recovery program, eating organic foods, low body bathing/foot bathing/hot spring bathing, and breathing/breathing exercises. Subfertile women highly pressured to become pregnant showed significant differences in the preference of the self-esteem recovery program, Domar 's relaxation therapy, NLP therapy, and sleeping in the woods, while women with anxiety and fear showed significant differences in the preference of walking barefoot in forests, mountain walking in silence, listening to water sounds/ hand and foot soak, self-esteem recovery program, NLP therapy, cognitive behavior therapy, aroma therapy, integrated art therapy in forests, forest bathing/wind bathing/sunbathing, a deep breath of air/phytoncide, and observing stars. Women with depression, hopelessness, helplessness, loneliness, and sadness showed significant differences in eating organic foods, self-esteem recovery program, counseling/coaching, and cognitive behavior therapy. The significance of this study was to analyze the preference of subfertile women, as subjects, for forest therapy program. The results of this study are expected to be used as basis data for developing forest therapy programs for subfertile women.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.475-485
• /
• 2004

This paper was studied to investigate and compare the effects of inclined baffle plate on the turbulent flow characteristics of a gun-type gas burner through X-Y plane and Y-Z plane respectively by using X-probe from hot-wire anemometer system. For this purpose, two burner models with a cone-type baffle plate and a flat-type one respectively were used. The fast jet flow spurted from slits plays a role such as an air-curtain because it encircles rotational flow by swirl vanes and drives mixed main flow to axial direction regardless of the inclination of baffle plate. The inclined baffle plate causes axial mean velocity component and turbulent intensities etc. to be greatly concentrated towards the central part of a burner, and its effect especially appears in the range of about X/R=1.0-2.0. Also, it gives much larger size to axial mean velocity component and turbulent intensities etc formed near the slits in the range of X/R=1.4103. Especially the inclined baffle plate shifts more the Reynolds shear stress uw to the central region of a burner(Y/R=${\pm}$0.75) than the flat-type one, moreover it develops more strongly than uv.

• 에너지공학
• /
• 제12권1호
• /
• pp.11-16
• /
• 2003

지상 정적 상태에 있는 항공기내 연료온도의 변화가 유한차분식에 의하여 해석되었다. 수정 Dufort-Frankel 기법의 explicit 방법에 의해 수치계산이 수행되었다. 항공기는 지상 정적상태에서 1% hot day 대기조건에 따른 태양의 복사 및 바람의 속도와 함께 반복되는 일일주기의 공기온도에 노출되어 있다고 가정되었다. 항공기는 난류유동장내에 있는 것으로 가정되었다. 항공기 표면과 외부대기사이의 열전달을 계산하기 위하여 Eckert에 의해 제안된 평판위의 난류 열전달계수가 사용되었다. 본 해석에 사용된 지배방정식은 연료에 대한 에너지방정식이다. 본 해석으로부터, 주익탱크의 연료온도가 다른 탱크들 가운데 가장 높게 나타났으며 온도변화율 또한 가장 크게 나타났다. 본 온도해석에 대한 결과는 여러 비행임무에 있어서 항공기내의 연료온도 변화 해석을 위한 초기치로서 사용될 수 있다. 또한, 본 해석방법은 항공기 열에너지 관리시스템의 해석 및 설계에 사용될 수 있다.

• 한국수소및신에너지학회논문집
• /
• 제7권1호
• /
• pp.29-37
• /
• 1996

Alkaline water electrolysis has been commercialized as the only large-scale method for a long time to produce hydrogen and the technology is superior to other methods such as photochemical, thermochemical water splitting, and thermal decomposition method in view of efficiency and related technical problem. However, such conventional electrolyzer do not have high electric efficiency and productivity to apply to large scale hydrogen production for energy or chemical feedstocks. Solid polymer electrolyte water electrolysis using a perfluorocation exchange membrane as an $H^+$ ion conductor is considered to be a promising method, because of capability for operating at high current densities and low cell voltages. So, this is a good technology for the storage of electricity generated by photovoltaic power plants, wind generators and other energy conversion systems. One of the most important R&D topics in electrolyser is how to minimize cell voltage and maximize current density in order to increase the productivity of the electrolyzer. A commercialized technology is the hot press method which the film type electrocatalyst is hot-pressed to soild polymer membrane in order to eliminate the contact resistance. Various technologies, electrocatalyst formed over Nafion membrane surface by means of nonelectrolytic plating process, porous sintered metal(titanium powder) or titanium mesh coated with electrocatalyst, have been studied for preparation of membrane-electrocatalyst composites. In this study some experiments have been conducted at a solid polymer electrolyte water electrolyzer, which consisted of single cell stack with an electrode area of $25cm^2$ in a unipolar arrangement using titanium mesh coated with electrocatalyst.

• 천문학회보
• /
• 제41권2호
• /
• pp.57.3-58
• /
• 2016

A symbiotic star is a wide binary system consisting of a hot white dwarf and a mass losing giant, where the giant loses its material in the form of a slow stellar wind resulting in accretion onto the white dwarf through gravitational capture. Symbiotic stars are known to exhibit unique spectral features at 6825 and 7082, which are formed from O VI 1032 and 1038 through Raman scattering with atomic hydrogen. In this Monte Carlo study we investigate the flux ratio of 6825 and 7082 in a neutral region with a geometric shape of a slab, cylinder and sphere. By varying the amount of neutral hydrogen parametrized by the column density along a specified direction, we compute and compare the flux ratio of Raman scattered O VI 6825 and 7082. In the column density around 1020 cm-2, flux ratio changes in a complicated way, rapidly decreasing from the optically thin limit to unity the optically thick limit as the column density increases. It is also notable that when the neutral region is of a slab shape with the O VI source outside the slab, the optically thick limit is less than unity, implying a significant fraction of O VI photons escape through Rayleigh scattering near the boundary. We compare our high resolution CFHT data of HM Sge and AG Dra with the data simulated with finite cylinder models confirming that 'S' type symbiotic tend to be characterized by thicker HI region that 'D' type counterparts. It is expected that this study will be useful in interpretation of the clear disparity of Raman O VI 6825 and 7082 profiles, which will shed much light on the kinematics and the asymmetric distribution of O VI material around the hot white dwarf.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.442-449
• /
• 1984

본 연구에서는 두 분류가 교우되어 배합이 이루어지는 유동역에서 3차원 방향 에 대하여 평균속도분포, 난류강도분포, 난류전단응력분포, 상관계수의 분포 및 난류 운동에너지와 운동량의 변화 등을 측정 분석하였다.

• The Plant Pathology Journal
• /
• 제30권2호
• /
• pp.125-135
• /
• 2014

A population model of bacterial spot caused by Xanthomonas campestris pv. vesicatoria on hot pepper was developed to predict the primary disease infection date. The model estimated the pathogen population on the surface and within the leaf of the host based on the wetness period and temperature. For successful infection, at least 5,000 cells/ml of the bacterial population were required. Also, wind and rain were necessary according to regression analyses of the monitored data. Bacterial spot on the model is initiated when the pathogen population exceeds $10^{15}cells/g$ within the leaf. The developed model was validated using 94 assessed samples from 2000 to 2007 obtained from monitored fields. Based on the validation study, the predicted initial infection dates varied based on the year rather than the location. Differences in initial infection dates between the model predictions and the monitored data in the field were minimal. For example, predicted infection dates for 7 locations were within the same month as the actual infection dates, 11 locations were within 1 month of the actual infection, and only 3 locations were more than 2 months apart from the actual infection. The predicted infection dates were mapped from 2009 to 2012; 2011 was the most severe year. Although the model was not sensitive enough to predict disease severity of less than 0.1% in the field, our model predicted bacterial spot severity of 1% or more. Therefore, this model can be applied in the field to determine when bacterial spot control is required.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.413-422
• /
• 2012

덕티드팬을 추진 장치로 사용하는 소형 무인항공기는 도심 및 협소한 공간에서 정찰 및 감시에 사용 가능하며, 프로펠러에 비해 높은 추진 효율과 추력 특성을 나타낸다. 덕티드팬 무인항공기의 운용 거리와 비행 시간을 증가시키기 위해서는 정지 비행 및 전진 비행시의 추력 특성연구가 중요하며 비행 안정성 확보를 위해서는 비정상 3차원 유동 특성 연구가 필수적이다. 본 연구에서는 동익과 정익으로 구성된 덕티드팬의 설계 결과 검증과 안정적인 비행 특성을 확인하기 위해 덕티드팬의 추력 특성과 비정상 3차원 유동장을 계측하였다. 덕티드팬의 정지 및 전진 비행시의 추력 특성은 소형 아음속 풍동의 6분력 밸런스 시스템을 이용하여 측정되었고, 비정상 3차원 유동장은 $45^{\circ}$ 경사열선의 프로브 고정법에 의해 분석되었다. 덕티드팬의 덕트와 정익이 추력특성에 다소 큰 영향을 미치며, 정익에 의해 덕티드팬의 안정적인 비행이 가능함을 확인하였다.

• Safety and Health at Work
• /
• 제12권1호
• /
• pp.119-126
• /
• 2021

Background: During the period 2001 to 2016, the maximum temperatures in Thailand rose from 38-41℃ to 42-44℃. The current occupational heat exposure standard of Thailand issued in 2006 is based on wet bulb globe temperature (WBGT) defined for three workload levels without a work-rest regimen. This study examined whether the present standard still protects most workers. Methods: The sample comprised 168 heat acclimatized workers (90 in construction sites, 78 in foundries). Heart rate and auditory canal temperature were recorded continuously for 2 hours. Workplace WBGT, relative humidity, and wind velocity were monitored, and the participants' workloads were estimated. Heat-related symptoms and signs were collected by a questionnaire. Results: Only 55% of the participants worked in workplaces complying with the heat standard. Of them, 79% had auditory canal temperature ≤ 38.5℃, compared with only 58% in noncompliant workplaces. 18% and 43% of the workers in compliant and noncompliant workplaces, respectively, had symptoms from heat stress, the trend being similar across all workload levels. An increase of one degree (C) in WBGT was associated with a 1.85-fold increase (95% confidence interval: 1.44-2.48) in odds for having symptoms. Conclusion: Compliance with the current occupational heat standard protects 4/5 of the workers, whereas noncompliance reduces this proportion to one half. The reasons for noncompliance include the gaps and ambiguities in the law. The law should specify work/rest schedules; outdoor work should be identified as an occupational heat hazard; and the staff should include occupational personnel to manage heat stress in establishments involving heat exposure.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.221-227
• /
• 2016

풍력발전기에서 메인 샤프트는 로터허브와 증속기를 연결하는 중요 부품 중 하나이며 주로 자유단조공법을 통하여 제조된다. 하지만 고 MW급 이상의 메인샤프트는 중량을 감소시키기 위하여 중공형 설계가 이루어지며 주조공법을 이용하여 제조되고 있다. 본 연구의 목적은 중공형 메인샤프트를 단조공법을 이용하여 생산할 수 있는 제조공정을 개발하는 것이다. 자유단조 공법의 공정설계 방법에 따라 중실형과 중공형 메인샤프트를 제조하기 위한 단조공정을 각각 설계하였다. 설계된 공정의 성형가능성을 확인하기 위하여 온도, 변형률 속도에 따른 유동응력을 열간압축실험을 통하여 구한 후 유한요소해석을 수행하였다. 유한요소해석을 통하여 단조업계에서 통상 행해지는 중실형 단조공법의 온도 및 변형률 등의 관리인자와 제안된 중공형단조공법의 인자를 비교하여 성형가능성을 예측하였다. 시제품 제작을 통하여 중공형 형상을 원소재회수율, 내부품질, 형상 및 치수 등에서 높은 생산성으로 제조가 가능함을 확인하였다.