• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.129-135
• /
• 2005

At present, fatigue design of welded structures is primarily based on a nominal stress or hot spot stress approach with a series of classified weld S-N curves. Although well accepted by major industries, the nominal stress based fatigue design approach is cumbersome in terms of securing a series of S-N curves corresponding to each class of joint types and loading modes. The hot spot stress based fatigue design has a difficulty of finding a proper stress through the global model, the midium size model, and the detail model of ship structure. Also, it is difficult to link proper displacements within three different mesh size models. Recently, the structural stress is proposed as a mesh-size insensitive structural stress definition that gives a stress state at weld toe with relatively large mesh size. However, this method requires an experimental validation in obtaining the fatigue strength of weldments. Therefore, in this study, a series of experiment is performed for various sizes of weldments.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.211-218
• /
• 2000

Hot spot behaviors on the disk-pad contact surface during a braking operation have been analyzed for a ventilated disk brake using the finite element method. Hot spots which were studied using a coupled thermal-mechanical analysis technique are influenced by all of the mechanical, thermal, elastic and plastic processes that are involved in braking cycles, but their temperature gradients are most affected by rubbing speeds, braking forces, and design parameters between the disk and the pad. Undesirable hot spots that are generated by local thermoelastic instabilities are intended to be removed by optimized design parameters and material properties. In this study, a three-dimensional numerical method for the demonstration of hot spot behaviors has been applied to the rubbing surfaces between the disk and the pad.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.1
• /
• pp.20-26
• /
• 2007

In this study, fatigue strength of load-carrying cruciform fillet welded joints were evaluated using a new method proposed by Yamada, for geometric or structural stress in welded joint, that is, one-millimeter stress below the surface in the direction corresponding to the expected crack path. Validity of the method is verified by analyzing fatigue test results for load-carrying cruciform welded specimens has different size of weld toe radius, leg length and plate thickness reported in literature. Structural stress concentration factor for 1mm below the surface was calculated by finite element analysis for each specimen respectively. When compared to the basic fatigue resistance curve offered by BS7608, the one-millimeter stress method shows conservative evaluation for load-carrying cruciform fillet welded joints.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.476-483
• /
• 2006

Fatigue strength assessments with two types of load carrying fillet weldment under out-of-plane bending load have been carried out by using both hot spot stress and structural stress methods. In this study, a derivation for the structural stress method using shell element models is discussed in detail. Finite element analysis using shell element models have been performed for the assessment of fatigue strength. As a result of the fatigue strength evaluation for load carrying transverse fillet weldment, hot spot stress method is found to be consistent with structural stress method and measurement. Hot spot stress, however, estimated for the load carrying longitudinal fillet weldment exhibit large variation with respect to mesh size and element type while the calculated structural stress for the longitudinal fillet weldment is relatively independent of mesh size. On the other hand, drawbacks and doubts associated with applying the structural stress method such as the guidance of virtual node method have been discussed.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.169-184
• /
• 2000

Industrial clusters and their boundaries are identified by factor and hot spot analyses for the greater Cincinnati metropolitan area in USA. While traditional input-output approach identified aspatial industrial clusters, this study combines traditional approach with GIS techniques to identify their boundaries. Combining the results of input-output industrial clusters with the leading industries groups, we have identified five leading industry clusters. They are food (20), chemicals (28), metal manufacturing (32), metal products (33), and machinery (35). We also used hot spot analysis to visualize each industry cluster on the research area by using Arcview software. Determining the degree to which such industries are associated spatially and their spatial delimitation may be an additional approach to measuring the efficiency of the spatial organization of an economy. It is hoped that the industrial clusters and industrial spatial clusters approaches may also proved the basis for the development of new models of the spatial arrangement of industry at a level more aggregated than that of the single plant or firm.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1403-1415
• /
• 2019

Urban population growth and consequent rapid urbanization involve some thermal environmental problems in the cities. Monitoring of thermal environments in urban areas such as hot spot analysis is required for effective actions to resolve these problems. This study selected 14 dongs and surrounding administrative districts of Sejong city as study areas and analyzed the characteristics of changes in surface temperature due to the urban expansion in the summer from 2013 to 2018. In the study, the surface temperature distributions in the study areas were plotted using surface temperature values from Landsat 8 and NDVI (Normalized Difference Vegetation Index) and NDBI (Normalized Difference Built-up Index) based on KOMPSAT 2/3 data, and the patterns of surface temperature changes with urban expansion were discussed using the estimated NDVI and NDBI. In particular, the distinct urbanization in the study areas were selected for case studies, and the cause of the changes in the hot spots in the regions was analyzed using high-resolution KOMPSAT images. This study results present that hot spots appeared in urbanized regions within the study areas, and it was plotted that the lower the NDVI values and the higher the NDBI values indicate the temperature values are high. The land surface temperature and satellite-based products were used to divide the study areas into continuously urbanized regions and rapidly urbanized regions and to identify the different characteristics depending on land covers. In the regions with distinct surface temperature changes by urbanization, the analysis using high-resolution KOMPSAT images as presented in this study could provide effective information for urban planning and policy utilization in the future.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.18-28
• /
• 2005

본 일반 지침은 용접 이음부나 구조물의 피로강도 평가에 사용되는 기준응력 계산에 관한 내용으로 핫스팟 응력(Hot Spot Stress, 이하 HSS)이라고 칭하는 응력 평가용 해석 기술 및 관련 내용을 다룬다. 국제용접협회 (IIW: International Institute of Welding)발간 지침서의 주요내용에 대한 간략한 소개와 함께 대한용접학회 용접강도연구위원회의 Round-Robin 시험결과를 바탕으로 유한요소 응력해석 기반 용접 이음부의 HSS 평가 방법에 관한 내용을 정리하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.477-486
• /
• 2017

For the analysis of the optical characteristics of electrodeless lamps, all the lamp surface temperatures have been treated the same. However, the interpretation of optical properties in this way has not been sufficient in terms of accuracy. In this paper, to overcome this problem, we divided the inside of the bulb into two parts, hot spot and cold spot, and analyzed the density difference of mercury by different temperatures. Here, it is assumed that the distribution of temperature and density is linear. The effect of optical characteristics through redistribution of hot spot and cold spot density was analyzed. It was also confirmed that the ratio of the density of the redistributed discharge gas has a great influence on the saturation of the optical characteristics. Therefore, it is proved that the design method through the domestic setting is very useful in the actual design, and the method for shortening the time for stabilizing the optical characteristics is obtained.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.277-292
• /
• 2017

The development impact fee (DIF) zoning is a very beneficial public tool to provide the pre-planned urban infrastructures in those areas where significant urban sprawl had already taken place. In order to guarantee its benefit, however, it is required to designate the zone boundaries accurately and consistently. This study, in this context, tries to test the validity of the 50m-grid suggested in the official DIF manual, and to compare an alternative Hot Spot Analysis tool with the existing Spatial Aggregation method in configuring the zone boundaries. The results indicate that, unlike the case of population growth rate, current 50m grid size could not be much adequate in the case of using the development-permit increase rate to configure the primary DIF zones. Also, the optimal grid sizes seem to differ in the cases of Spatial Aggregation and Hot Spot Analysis. Further extended studies, in this regard, seem necessary to check the validity of the existing grid-size criteria as well as the boundary configuration methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.