• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3931-3936
• /
• 2013

Background: Iran is a country with very high incidences of stomach cancer, especially in Northern parts. Here we assessed prognostic value of serum screening biomarkers among people >50 years old for early detection of precancerous lesions in a hot spot for gastric carcinoma in Guilan Province, North Iran. Methods: A cross-sectional population-based survey was conducted on 1,390 residents of Lashtenasha city with the mean age (SD) of 61.8 (9.02) years old (50.8% females) to assess the association of gastrin and the pepsinogen (PG) I/II ratio with premalignant gastric lesions. Blood samples were taken for CBC, blood group, and serologic exams (PGI, PGII, and gastrin 17) from each subject. Expert gastroenterologists performed upper GI endoscopy and ROC curves were generated to determine appropriate cutoff points. Results: Mean values of PGI, PGII, PGI/PGII and gastrin were significantly different between patients with and without atrophy or metaplasia (P<0.05). To diagnose atrophy and intestinal metaplasia, a significantly higher AUC was observed for the PGI/PGII ratio (70 and 72%, respectively) compared to the PGI (56, 55%), PGII (63, 64%) and gastrin (59, 61%) (all p<0.001). Conclusions: Biomarker tests such as the PGI/II ratio can be used in the screening and diagnosis of subjects at high gastric cancer risk in our region.

• Composites Research
• /
• v.30 no.5
• /
• pp.288-296
• /
• 2017

The focus of this study is to experimentally investigate the heat dissipation characteristics of poly (methyl methacrylate) (PMMA) composite films with phase change materials (PCM) to resolve heat build-up problems encountered in various electronic devices. In this study, two different types of phase change materials were used to fabricate the composite films by compression molding method and PCM paste sealing method then compared. It was observed in this study that the heat dissipation capability of PCM/PMMA composite films was remarkably enhanced by applying graphite sheet or graphene film into the composite due to their high thermal conductivity. These PCM/ PMMA composite films were attached on the hot spot inside smart phone and tested its surface temperature change according to time. The heat dissipation capability of PCM/PMMA composite film incorporated smart phone was increased 154% and hybrid PCM/PMMA composite film incorporated smart phone was increased 286% over the reference, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• Korean Security Journal
• /
• no.36
• /
• pp.29-55
• /
• 2013

In modern society, citizen's expectation about policing levels have been rising over time and it limited resources of the police to deal with the security services are insufficient. Until now, the state monopoly of the police activity was changing to subject of a variety in cooperation with public security system. The citizens considers community not the destination to police enforce the law but space for effective policing partners. Japanese police focus on cooperation oriented policing to strengthen the police and local residents with crime prevention for a long time. Also, the community through a variety of problem-solving policing activities to identify problems such as anxiety and anguish of the people. The legal basis for cooperative policing activity is that Nagaoka city crime prevention regulation in 1979. In recent years, Tokyo local government legislated the safe town development regulations(東京都安全 安心まちづくり條例) and set up the hot-spot area to promote the safety of public facilities. Cooperative policing not police intervention for crime prevention but national policy for the city reclamation in Japan. Police as well as the Ministry of Land and Transport, Ministry of Justice, Ministry of Education, Prime Minister and all government departments thread safe city, crime prevention, and has been working to make the safe city. Japan's cooperative policing is a system that receives the most attention and greater implications.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.36-45
• /
• 2018

Cemeteries in the United States are frequently observed near residential areas in cities even though they are spaces for the dead. However, it has not been fully studied when and how cemeteries were formed in the process of urbanization. Thus, this research aimed to investigate the spatial structure and historical change of cemeteries in Seattle due to urbanization, focusing on the contextual relationship between cemeteries and the surroundings according to two time periods: the early formation period of cemeteries in Seattle and the current period. For this, a mixed method was taken in this paper that combined historical analysis based on old references and historic maps with cluster analysis using GIS. In conclusion, the research found that early cemeteries of Seattle in downtown areas were introduced as by-products of urban formation, but the cemeteries in the suburbs were established ahead of urban growth and neighborhood development. In addition, Seattle's cemeteries not only showed a similar locational pattern to Seattle's shopping centers, but also were positively associated with population distribution given the Hot Spot Analysis. In other words, Seattle's cemeteries were originally located in rural areas, but later came to be located in urban areas, sustaining the landscape of American rural cemeteries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.94-99
• /
• 2011

This study was performed to investigate the effect of foliar feeding as the fertilization on creeping benrgrass green. Research results have showed that the visual quality of bentgrass as well as shoot density and chlorophyll index dramatically improved after foliar feeding. Shoot density of bent grass in foliar based fertilization was 2.8 ea/$cm^2$ higher than that of the liquid based fertilization during the experiment period, moreover that the foliar feeding is more effective to alleviate shoot density during the rainy season in summer. Results showed that foliar feeding was key role to achieve the stable visual quality, chlorophyll index and maintained Normalized Difference Vegetation Index (NDVI) throughout the year in addition to get fast recovery after aeration and dry spot. These were consistent with the previous research of foliar feeding which directly provided nutrient to the turfgrass leaf thus increased turfgrass growth within a short time. It is projected to be a especially adequate management program during the hot summer season in which the nutrition feeding is low. However, root growth was no significant difference between foliar based fertilization and liquid based fertilization. Golf Course managers also should consider about the number of frequent fertilizing. Lastly, it was no big change in chemical property by soil foliar based fertilization which is meaning of preventing the soil salinization, meanwhile, it is prone to reach the nutrient deficiency. It hopes to be settled as the general fertilization in golf course of Korea, since there are many advantages of foliar based fertilization program. It is suggested to study more practical process of foliar feeding through the further research.

• Journal of the Korean Regional Science Association
• /
• v.36 no.2
• /
• pp.37-49
• /
• 2020

Currently, the average aging rate has reached 14.8% in our country, despite the residents are aging or over the average aging rate has reached 31.8% with a population of less than 100,000. Various convenience facilities are concentrated in the town center, causing inconvenience to use. The main purpose of this study is to analyze the accessability of living convenience facilities in this area. This study builds on the population aging of the research target area and distribution of living facilities for the elderly based on MDIS data of the regional survey of the National Agriculture, Forestry and Fishing Survey of the National Statistical Office, and QGIS was used to visualize the status of the elderly, distribution of convenience facilities for the elderly, hot spot maps, and distance analysis, and also technical statistical analysis was conducted. As a result of the analysis, it was confirmed that the distribution and distance of living convenience facilities for the elderly in the area where the elderly lived a lot was located in a location that caused severe inconvenience to the use of the elderly. This suggests the necessity of the change facilities type and spatial reorganization by raising the need for space policy changes on the spatial distribution of elderly convenience facilities, reflecting the serious aging of small towns such as the study area.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.149-155
• /
• 2003

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP. According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.194-198
• /
• 2008

Significant soil erosion and water quality degradation issues are occurring at highland agricultural areas of Kangwon province because of agronomic and topographical specialities of the region. Thus spatial and temporal modeling techniques are often utilized to analyze soil erosion and sediment behaviors at watershed scale. The Soil and Water Assessment Tool (SWAT) model is one of the watershed scale models that have been widely used for these ends in Korea. In most cases, the SWAT users tend to use the readily available input dataset, such as the Ministry of Environment (MOE) land cover data ignoring temporal and spatial changes in land cover. Spatial and temporal resolutions of the MOE land cover data are not good enough to reflect field condition for accurate assesment of soil erosion and sediment behaviors. Especially accelerated soil erosion is occurring from agricultural fields, which is sometimes not possible to identify with low-resolution MOD land cover data. Thus new land cover data is prepared with cadastral map and high spatial resolution images of the Doam-dam watershed. The SWAT model was calibrated and validated with this land cover data. The EI values were 0.79 and 0.85 for streamflow calibration and validation, respectively. The EI were 0.79 and 0.86 for sediment calibration and validation, respectively. These EI values were greater than those with MOE land cover data. With newly prepared land cover dataset for the Doam-dam watershed, the SWAT model better predicts hydrologic and sediment behaviors. The number of HRUs with new land cover data increased by 70.2% compared with that with the MOE land cover, indicating better representation of small-sized agricultural field boundaries. The SWAT estimated annual average sediment yield with the MOE land cover data was 61.8 ton/ha/year for the Doam-dam watershed, while 36.2 ton/ha/year (70.7% difference) of annual sediment yield with new land cover data. Especially the most significant difference in estimated sediment yield was 548.0% for the subwatershed #2 (165.9 ton/ha/year with the MOE land cover data and 25.6 ton/ha/year with new land cover data developed in this study). The results obtained in this study implies that the use of MOE land cover data in SWAT sediment simulation for the Doam-dam watershed could results in 70.7% differences in overall sediment estimation and incorrect identification of sediment hot spot areas (such as subwatershed #2) for effective sediment management. Therefore it is recommended that one needs to carefully validate land cover for the study watershed for accurate hydrologic and sediment simulation with the SWAT model.