• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.71-76
• /
• 2002

A survey of radon concentrations in both indoor and outdoor atmospheres was carried out using EIRM and Cup Monitor for the period of February 1996 to March 1997. EIRM were used to measure the indoor and outdoor radon concentration at five major cities university. Cup Monitor were also used to measure the indoor radon concentrations at shopping store, office building, apartment, hospital and house in Seoul. The mean indoor and outdoor radon concentrations at the five major cities(Seoul, Daegu, Daejon, Cwangiu and Busan) were 24.1 Bq/m$^3$and 8.62 Bq/m$^3$, respectively. The ratio of indoor to outdoor radon concentrations ranged front 1.7 to 3.9. Inspection of its seasonal distribute pattern indicates the enhancement during winter relative to summer, consistently for both indoor and outdoor air. The results of the survey showed that the concentrations in basements were clearly higher than those in usual living/working places.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.240-243
• /
• 2003

In this study, as the preliminary step far developing a multi-purpose Autonomous robust carrier mobile robot to transport trolleys or heavy goods and serve as robotic nursing assistant in hospital wards. The aim of this paper is to present the use of multi-sensor data fusion such as sonar, IR sensor for map-building mobile robot to navigate, and presents an experimental mobile robot designed to operate autonomously within both indoor and outdoor environments. Smart sensory systems are crucial for successful autonomous systems. We will give an explanation for the robot system architecture designed and implemented in this study and a short review of existing techniques, since there exist several recent thorough books and review paper on this paper. It is first dealt with the general principle of the navigation and guidance architecture, then the detailed functions recognizing environments updated, obstacle detection and motion assessment, with the first results from the simulations run.

• The Journal of Korean Society for Radiation Therapy
• /
• v.2 no.1
• /
• pp.31-40
• /
• 1987

In the case of designing a high dose rate remote controlled afterloading treatment room with existing hospital facilities. We must construct the effective protective barriers so as to reduce the primary and scattered radiation up to the maximum permissible dose level. It is difficult to reinforce the barrier thickness of the shielding requirements because of the limited space and the problem of the existing building structure at the surrounding area. Therefore we can reduce the intensity of primary radiation to the required degree at the location of interest with installing the appropriate I shaped Pb barriers between the radiation source and the shielding wall of the concrete. As a result, it was possible to reduce the intensity of the primary radiation below the M.P.D level by using additional Pb barriers instead of increasing thickness of concrete wall.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.1 no.1
• /
• pp.69-78
• /
• 1995

This study is intended to understand the architectural characteristics and trends of general hospitals in Europe. The Observations, interviewes with the staff, and analyses of related materials were executed through the study-visits of sample hospitals. Some results of the study could be summarized as follows : (1) The architectural characteristics of sample hospitals could be described as the realization of horizontal design concept, application of urban design method, specialization of service departments, intergration of facility design, and planning for the emergency & disaster. (2) The architectural trends of sample hospitals could be suggested as the decentralization of functions, promotion of building standard, enhancement of interior space, consideration of environment, and autonomous management & operation of facilities. (3) The humanistic and environmental approaches from european hospitals would be preferably applicable rather than the popular concept of automation, ultra-modernization and mega-structure in Korea. First of all, the bed-center and proper facilities for disaster should be considered.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.167-174
• /
• 2018

Presently, the exploration of an unknown environment is an important task for the development of mobile robots and mobile robots are navigated by means of a number of methods, using navigating systems such as the sonar-sensing system or the visual-sensing system. To fully utilize the strengths of both the sonar and visual sensing systems, In mobile robotics, multi-sensor data fusion(MSDF) became useful method for navigation and collision avoiding. Moreover, their applicability for map building and navigation has exploited in recent years. In this paper, as the preliminary step for developing a multi-purpose autonomous carrier mobile robot to transport trolleys or heavy goods and serve as robotic nursing assistant in hospital wards. The aim of this paper is to present the use of multi-sensor data fusion such as ultrasonic sensor, IR sensor for mobile robot to navigate, and presents an experimental mobile robot designed to operate autonomously within indoor environments. Simulation results with a mobile robot will demonstrate the effectiveness of the discussed methods.

• Korean Management Science Review
• /
• v.29 no.1
• /
• pp.115-129
• /
• 2012

Service Encounter employees play a crucial role in service delivery and building relationships with customers and their attitudes and behaviors towards customers determine customers' perceived service quality and satisfaction. Past research indicates that TQM managerial practices are a critical determinant of employee's attitude and performance in the workplace. Therefore, this study investigates a model examining the relationship among TQM, employees' attitude and service performance in a hospital. Our measurement results were acceptable in terms of reliability and validity. The statistical testing shows significance on the positive relationship in the sequential order of TQM, employee's attitude and service performance. In conclusion, the theoretical and practical implications of this study were discussed, along with its limitations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.278-284
• /
• 2006

In thispaper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.

• Journal of Integrative Natural Science
• /
• v.6 no.3
• /
• pp.158-162
• /
• 2013

In these days, production and management of various digital contents increased because of growing internet users. Now the digital contents production system is producing video which is based on keywords and contents. This paper proposes the sensibility-based contents management system which can analyze and manage contents of video production system. Due to the sensibility-based multimedia contents management system, it is possible to analyze and manage sensibility contents what users want. As a result, by building a database, we can provide intelligent and meaningful services. In addition, contrary to low grade's contents-based production system, we can cope actively with users' demands.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.380-386
• /
• 2001

In considering the issue of safely during emergency building evacuations, it is important to be able to make accurate predictions about evacuation conditions and to be able to assess safety levels. Simulation techniques are often used to make predictions regarding evacuation conditions. The two main types of prediction models are crowd flow models and discrete models. We have developed an evacuation simulation system based on the discrete model which attempts to address the implementation problems of existing evacuation models. Our model incorporates characteristics such as evacuee profiles and spatial considerations, and is capable of dynamically predicting the behavior of individual evacuees. The simulation system is primarily designed for buildings in which many people are incapacitated and require helpers in order to evacuate, such as hospitals and facilities fur the elderly. We show the results that the evacuation simulation system was used to perform two trial simulations.

• Journal of Biomedical Engineering Research
• /
• v.26 no.4
• /
• pp.185-191
• /
• 2005

In this paper, we proposed a downscaled 3D object technique using medical images for telediagnostic use. The proposed system consisted of downscaling/thresholding processes for building a downscaled 3D object and a process for obtaining 2D images at specific angles for diagnosis support. We used 80 slices of Digital Imaging and Communication in Medicine(DICOM) CT images as sample images and the platform-independent Java language for the experiment. We confirmed that the total image set size and transmission time of the original DICOM image set using a down-scaled 3D object decreased approximately $99\%\;and\;98.41\%,$ respectively. With additional studies, the proposed technique obtained from these results will become useful in supporting diagnosis for home and hospital care.