• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.307-311
• /
• 2011

Solid solutions of the (1-x)$BiFeO_3-xSrTiO_3$ ceramic system (x = 0~0.4) are explored here in attempts to obtain multiferroic properties in these systems. The polarization-electric field hysteresis, magnetization-magnetic field curves, and dielectric properties are also characterized. This solid-solution system shows a crystal structural transition from a noncentrosymmetric (R3c) structure to a centrosymmetric (Pm-3m) structure at 0.3 < x < 0.4. The solid solution ceramic shows unsaturated M-H behavior and low remanent magnetization over the composition region of 0.1 ${\leq}$ x ${\leq}$ 0.3. The $0.7BiFeO_3-0.3SrTiO_3$ system shows the largest value of $M_s$ at 0.17 emu/g and the smallest value of $H_c$ at 1.06 kOe. The P-E hysteresis curves were not saturated under an electric field as high as E = 70 kV/cm. This system is considered to have multiferroic characteristics in the composition range of 0.1 ${\leq}$ x ${\leq}$ 0.3.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.423-423
• /
• 2007

In this study, the effects of annealing conditions on the structural and optical properties of ZnO films were investigated. ZnO oxide (ZnO) films were deposited onto $SiO_2$/Si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500{\sim}650^{\circ}C$ in the $O_2$ flow for 5 ~ 20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterized by SEM and XRD, respectively. The optical properties were evaluated by PL measurement at room temperature using a He-Cd 325 nm laser. According to the results, the optimal annealing conditions for the best photoluminescence (PL) characteristics were found to be oxygen fraction, ($O_2/O_2+Ar$) of 20%, RF power of 240W, substrate temperature of RT (room temperature), annealing condition of $600^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr. The obtained wavelength of light emission was found at 379 nm (ultraviolet-UV region). However, the optimal parameters for the best PL characteristics of ZnO thin films were not consistent with those obtained from the (002) intensities of XRD analyses. As a result, XRD pattern was not considered as the key issue concerning the intensity of PL of ZnO thin film. The intensity of the emitted UV light will correspond to the grain size of ZnO film.

• Korean Journal of Microbiology
• /
• v.46 no.1
• /
• pp.68-72
• /
• 2010

The ${\beta}$-1,4-glucanase gene of Bacillus licheniformis B1 was expressed in Esherichia coli BL21, and a protein with a mass of 50 kDa that was soluble was overproduced. A protein with a mass of 37 kDa was secreted from B. licheniformis. It seems that the ${\beta}$-1,4-glucanase produced in E. coli contained the leader peptide and unprocessed carboxy-terminal region, but its processing occurred in the carboxyterminal in Bacillus. The optimal temperature of ${\beta}$-1,4-glucanase was $40^{\circ}C$. The enzyme still had 76% maximal activity at $60^{\circ}C$. The optimal pH of the enzyme was 7. The enzyme retained considerable activities over the weak-acidic, neutral, and weak-basic pH range. Acidic fungal cellulases are used in food, detergent, pulp, paper, textile industries. However, studies about neutral and alkaline cellulase are not enough. The cellulase developed in this study may be useful for industrial applications in the fields of biofuel development.

• Tribology and Lubricants
• /
• v.31 no.3
• /
• pp.125-140
• /
• 2015

In this paper, we present the results of the wear analysis of journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. We calculate journal bearing wear by using a modified specific wear rate considering the fractional film defect coefficient and load-sharing ratio for the asperity portion of a mixed elastohydrodynamic lubrication (EHL) regime coupled with previously presented graphical data of experimental lifetime linear wear in radial journal bearings. Based on the calculated wear depth, we obtain a new oil film thickness for every crank angle. By examination of the oil film thickness, we determine whether the oil film thickness at the wear scar region is in a mixed lubrication regime by comparing dimensionless oil film thickness, h/σ, to 3.0 at every crank angle. We present the lift-off speed and the crank angles involved with the wear calculation for bearings #1 and #2. The dimensionless oil film thickness, h/σ, illustrates whether the lubrication region between the two surfaces is still within the bounds of the mixed lubrication regime after scarring of the surface by wear. In addition, we present in tables the asperity contact pressure, the real minimum film thickness at the wear scar region, the modified specific wear rate, and the wear angle, α, for bearings #1 & #2. To show the real shape of the oil film at wear scar region, we depict the actual oil film thickness in graphs. We also tabulated the ranges of bearing angles related with wear scar. We present the wear volume for bearings #1 and #2 after one turn-on and turn-off of the engine ignition switch for five kinds of equivalent surface roughness. We show that the accumulated wear volume after a single turn-on and turn-off of an ignition switch normally increases with increasing surface roughness, with a few exceptions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.545-550
• /
• 2012

This work is for the design study of natural gas reformer (40 $m^3/hr$ over). We used experimental kinetic data from literature. After that, we set up theoretical model based on experimental reaction kinetic data. The shape of reactor is 1.7 m long and 200 mm dia. with cylinder geometry. Volume of reactor is 53.4 liter. Average flow velocity of gases in the reactor has been determined 0.272 m/sec and residence time is 9.26 sec. Reaction temperature is $850^{\circ}C$, with pressure 9.3 Bar. Used natural gas volume is about 9.21 $m^3/hr$. Produced hydrogen is 43.7 $m^3/hr$ with no change of pressure. Unreacted natural gas is 0.09 $m^3/hr$ and the amount of steam is 26.9 $m^3/hr$. Steam to $CH_4$ (s/c ratio) is 2.91. Reforming reaction take place from the reactor entrance to 120 cm region of cylinder type reactor. After the entrance of reacting gases to 120 cm region, the reaction reaches equilibrium which is close to products. This study can be applicable to design various reactors. Output data is in good agreements with the data in literatures1).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.425-432
• /
• 2019

Molecular dynamics simulations were carried out to analyze the impact on turbine rotational power based on nozzle shapes. y varying two parameters, turbine rotational velocity w and initial velocities ($V_x,V_y$) for generating molecules, turbine rotation velocities of molecules in turbine entrance arc region and turbine exit arc region were calculated. Average momentums were calculated over two regions, respectively and the differences (AMD) were compared and analyzed. The optimal range of w values to enhance AMD was investigated over 4 different nozzle shapes used, and an excellent nozzle shape to achieve more turbine rotational power was drawn.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.5
• /
• pp.275-287
• /
• 2022

In order to overcome the small scale of Korea waterworks and to achieve comprehensive improvement and innovation transformation, the waterworks integration was reviewed. The effect of consolidation was confirmed by the integration of the water supply business in the southern Gangwon region and the western Gyeongnam region in Korea, such as an increase in the flow rate and a decrease in the production unit cost. After facing management and service limitations overseas, more than 1,000 small-scale waterworks projects in the UK were integrated into 27 waterworks providers, and Japan also revised the Waterworks Act in December 2019 and is in the process of integrating waterworks. It is considered appropriate to promote the integration of waterworks projects in Korea by respecting the autonomy of local governments, but using a participatory method, a win-win method, and a linkage method. For the integration of waterworks projects, three strategies are proposed: First creating a national foundation for integration (revision of the Waterworks Act), Second establishing a waterworks integration strategy led by local governments, Third forming an external consensus and providing incentives for participation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.804_805
• /
• 2009

This paper deals with analysis on electromagnetic characteristics of linear induction motor(LIM) using the analytical method. As a analytical method, space harmonics method which is applied to multilayer region is used in this paper. Using the flux density obtained by analytical method, thrust and normal force are calculated through Maxell stress tensor. The results such as flux densitty, eddy current and force are verified by comparison between analytical results and FEM.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.4
• /
• pp.413-419
• /
• 1991

This study aims to evaluate the degree of malnutrition of children by three nutritional indicators-Weight for Age, Hight for Age, Weight for Height. The results are as follows; The average height and weight of children are much lower than Korea average height and weight. In terms of Weigh for Age, 20-40% of the samples belongs to below-2 standard deviation from the mean of reference group. 90% of the samples falls into the region below the mean. The standard deviation score indicates negative sign for eighty to ninety percent of the samples. The malnutrition of the samples is also confirmed in terms of Height for Age. In terms of Weight for Height, the mean of the samples is not significantly different from that of the reference group. Tests of the nutritional status under basis of three nutritional indicators show that approximately 50% of the samples had suffered from malnutrition and 17% of the samples have suffered from malnutrition.

• Journal for History of Mathematics
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2014

This interdisciplinary study explores G$\ddot{o}$del's hermeneutics of the relationship between relativity theory and idealistic philosophy in terms of time. For G$\ddot{o}$del, Einstein's contribution to the physical realization of idealistic philosophy would be remarkable. We start with a historical background around G$\ddot{o}$del's paper for Einstein(1949a). From the perspective of G$\ddot{o}$del's cosmology, the second part addresses the relative nature of time, and the next then investigates the rotating model of universes. G$\ddot{o}$del's own results show that the temporal conditions of relativity and idealistic philosophy are satisfiable in the mathematical model of rotating universes. Thus, it could be asserted to travel into any region of the past, present or future, and back again.