• 한국해양공학회지
• /
• 제17권2호
• /
• pp.77-84
• /
• 2003

The excessive cost of building ships causes the instability of payability, which manage poorly fishing vessels longer than 24m. As a result, an officer evades embarkation and a vicious circle is repeated. In this study, the optimal engine horsepower system for fishing vessels longer than 24m was invented to develop the most efficient engine horsepower, and also a database program for the most efficient engine horsepower has been developed based on the type of and their size.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.71-76
• /
• 2009

This paper describes a statistical analysis method for predicting a coast fishing boat's effective horsepower. The EHP estimation method for small coast fishing boats was developed, based on a statistical regression analysis of model test results in a circulating water channel. The statistical regression formula of a fishing boat's effective horsepower is determined from the regression analysis of the resistance test results for 15 actual coast fishing boats. This method was applied to the effective horsepower prediction of a G/T 4 ton class coast fishing boat. From the estimation of the effective horsepower using this regression formula and the experimental model test of the G/T 4 ton class coast fishing boat, the estimation accuracy was verified under 10 percent of the design speed. However, the effective horsepower prediction method for coast fishing boats using the regression formula will be used at the initial design and hull-form development stage.

• 수산해양기술연구
• /
• 제41권1호
• /
• pp.85-91
• /
• 2005

The existing fisheries managers ignored the fishery environment changes, have built competitively vessels of efficiency superiority with related corporations, and have captured indisciminately fisheries resourecs. The economical engine horsepower selection model for fishing vessels shorter than 24m is developed. Also, the economical engine horsepower selection model system is verified by the existing vessels, and the optimum vessel scale and engine horsepower classified by the type of fishery and scale are proposed.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.441-447
• /
• 1998

Motivated by a recent work, a fuzzy-power-controller(FPC) is designed for the relieving-horsepower control of output variable pump with electrical proportional valve and actually implemented on the industrial excavator. In order to calculate the output power of pump with input of FPC, a linear discrete time model of load system to pump is obtained and the result is applied to control the engine-pump coupled system by software without pressure and flow sensor. The FPC controls the engine and pump coupled system by relieving horsepower control according to the change of load and the running conditions in relieving horsepower control are selected by fuzzy inference engine. A case study is peformed through the construction of the control device and installation on the excavator. It shows that the relieving-horsepower control system with the FPC, as suggested in this paper, is superior to the conventional PID controllers. And also, the excavator, with the FPC, shows that the power-loss of the coupled system is reduced and the running speed of the hydraulic actuator is enhanced.

• 수산해양기술연구
• /
• 제57권1호
• /
• pp.1-9
• /
• 2021

Trawl fishing is a fishing method in which a large, motorized trawler tows a bag-shaped net to catch fish living at the bottom or middle layers. For a trawl gear, it is of utmost importance to select the gear size and towing speed suitable for the effective horsepower (EHP) of the trawler in the design stage. In general, the power required to move an object is proportional to the product of the object speed and resistance; therefore, there are various choices for the gear resistance and towing speed given the effective horsepower of the trawler. However, there have been few studies on the gear design of an appropriate scale for the towing speed given the effective horsepower of the trawler. In this study, the resistance and shape of three types of midwater trawl gears were analyzed using SimuTrawl, a computer simulation tool. In addition, the relationship between the propulsion force and speed of the ship was clarified when the size and effective horsepower of the trawler were determined. Finally, we suggested the relationship between the towing speed and the resistance of the gear when the trawler towed the net was investigated, and a specific method of selecting the gear size according to the towing speed.

• 해양환경안전학회지
• /
• 제30권2호
• /
• pp.157-164
• /
• 2024

부산 신항에 2020년부터 24,000 TEU급 초대형 컨테이너선이 입항하기 시작하였다. 본 연구에서는 부산 신항을 대상으로 24,000 TEU급 초대형 컨테이너선의 안전한 접·이안을 위한 예선의 소요마력을 산출하기 위해 선체에 작용하는 풍압력과 유압력을 계산하였다. 풍속이 10m/s(20kts)일 때, 13,000 TEU 컨테이너선의 경우에는 현행 「부산항 예선 운영세칙」의 예선의 소요마력 기준을 만족하나, 16,000 TEU 및 24,000 TEU 컨테이너선의 경우에는 그 규정을 만족하지 못하는 것으로 나타났다. 따라서, 현행 예선사용 기준의 최대선박인 'G/T 15만톤 이상'의 선박 규모를 2단계로 분할하여 예선 사용기준을 상향하는 방안을 제시하였다. 14만톤은 12,100마력, 17만톤은 14,500마력, 23만톤은 18,000마력의 예선이 요구되므로, 15만톤 이상~20만톤 미만은 16,000마력, 20만톤 이상은 18,000마력으로 예선의 사용기준 개선안을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.152-157
• /
• 2006

The air pollutant emission from the railroad diesel locomotive is still a significant environmental concern in many countries including Korea and Unites States. The emission characteristics of the railroad diesel locomotive were extensively studied in this study. Particulate matter (PM) and nitrogen oxides ($NO_x$) emitted from a large locomotive engine (2-cycle, 16-cylinder, and 3,000-horsepower) under various engine-rating conditions was analyzed with a scanning mobility particle sizer and a gas stack sampler by using a dilution tunnel. We could gain the emission values of 2.1 g/horsepower-hour for PM and 42.7 g/horsepower-hour for $NO_x$. We proposed the emission reduction goal of the railroad diesel locomotive for Korea in comparison with the regulation of United States.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.105-111
• /
• 2006

항공기 엔진은 항공기가 각종 기동을 수행하도록 추력을 발생하는 것 외에 기동 수행을 위해 작동되는 조종면에 공급될 유압계통의 동력과 각종 항전장비 작동을 위한 전기계통의 동력을 공급한다. 엔진으로부터 제공되는 동력은 엔진의 고압압축기로부터 추출되기 때문에 축마력(Horsepower Extraction, HPX)이라하며, 추출되어 제공되는 엔진 축마력이 유압계통과 전기계통에서 요구하는 요구 축마력보다 작게 되면 엔진에 과도한 부하가 걸려 엔진회전수 감소(Rollback) 및 심한 경우 실속(stall)등이 발생할 수 있다. T/A-50체계개발 동안 요구 축마력과 엔진의 공급 축마력에 대한 비교 해석을 수행하였고, 해석 결과 엔진 축마력이 요구 축마력보다 작은 것을 확인하였다. 엔진 축마력 증가를 위한 엔진 제어 스케쥴 변경이 수행되었으며, 변경된 제어 스케쥴이 장착된 엔진을 이용하여 T/A-50비행시험을 수행하였다. 비행시험 결과를 통해 해석 결과 및 변경된 제어 스케쥴의 타당성을 검증하였다.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.313-321
• /
• 2006

As the hull form of Korean fishing vessels is different from that of Japanese fishing vessels, the statistical regression analysis results of the resistance estimation for the Japanese fishing vessels is not able to be employed for the Korean fishing vessels just as it is. In this paper, it is introduced to an effective horsepower estimation method for the Korean domestic coastal fishing vessels, which is based on the statistical regression analysis of the model test results of the Japanese fishing vessels and the adjustment of those regression factors using the hull form data and model test results of Korean fishing vessels. The estimation results of the effective horsepower using the present prediction method are compared with experimental data. The comparison results show good agreements in the conventional speed range of fishing vessels.

• 대한조선학회지
• /
• 제3권1호
• /
• pp.25-32
• /
• 1966

For preliminary estimation of ships' machinery weights, many papers giving well-judged data and discussions for rational method of estimation, such as [1], [2], [3], [4], [5], [6], are available, however, they are mostly concerned with large ships propelled by power more than about 2, 000 horsepower. Regarding the medium and small-sized ships, as far as the author is aware, fragmental data and vague discussions found in various technical literature are the all available. In this paper, available data concerned with machinery weights of commercial ships propelled by direct-drive diesel plants of power below 3, 000 horsepower with single screw propeller are collected and analysed to obtain systematic data Fig. 1 and Fig. 2 as weight to power ratio versus power per shaft diagrams together with suplementary data Fig. 1 and Fig. 3. Influences of various factor such as revolutions per minute, mean effective pressure, type and construction of the main units on machinery weights are also investigated in detail to give a better guidance for logical and rational utlization of the proposed diagrams in preliminary estimation of machinery weights.