• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.5
• /
• pp.399-406
• /
• 2001

This paper presents a dynamic modeling and a sliding mode controller for the high-speed/high-accuracy position control system. The selected target system is the wire bonder assembly which is used in the semiconductor assembly process. This system is a reciprocating one around the pivot point that consists of VCM(voice coil motor) as an actuator and transducer horn as a bonding tool. For the modeling elements, the sys-tem is divided into electrical circuit, magnetic circuit and mechanical system. Each system is modeled using the bond graph method and united into the full system. Two major aims are considered in the design of the controller. The first one is that the horn must track the given reference trajectory. The second one is that the controller must be realizable by using the DSP board. Computer simulation and experimental results show that the designed sliding mode controller provides better performance than the PID controller.

• Transactions of Materials Processing
• /
• v.21 no.2
• /
• pp.119-125
• /
• 2012

The present study addresses a direct patterning process on a plastic film using ultrasonic vibration energy. In this process, a tool horn containing micro-patterns is attached to an ultrasonic power supply, and is used with ultrasonic vibration to replicate micro-patterns on the surface of a plastic film. To improve the replication characteristics of the micro-patterns, the effect of the die shape of the ultrasonic patterning process was investigated with respect to the flow direction control. Finite element analyses were performed to predict the flow characteristics of the polymer with variations in die design parameters. Experiments were conducted using the optimally-designed die, from which it was possible to attain much improved pattern replication.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.49.4-49.4
• /
• 2018

We present measurement results of the fabricated ultra wideband corrugated horn for the planned ASTE band7+8 receiver. Return loss and vector beam pattern measurements were carried out over 275-500 GHz frequency range. Hardware set-ups for these measurements are described as well as beam measurement data are compared with such design criteria as beam width, phase curvature and cross-polarization. We discuss the impact of these beam measurement results to the aperture efficiency of the proposed 2-mirror receiver optics for the ASTE telescope.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.88-96
• /
• 1996

Periodically slotted dielectricalloy filled parallel-plate waveguide as a leaky wave antenna is designed and fabricated at the center frequency of 10.0GHz. The antenna was fed by use of a hog-horn structure. The hog-horn and the two side walls and the lower plate of parallel-plate waveguide were fabricated form duralumin. The upper plate of parallel-plate waveguide with 48 periodic slots was made of copper plate of 1mm thickness. The dielectric material inside the parallel-plate waveguide was chosen to be paraffin. The experimental radiation pattern for the fbricated antenna was compared with the theoretical results for the finite periodic structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.231-232
• /
• 2006

Ultrasonic machining technology has been developed over recent years for manufacturing the quality-assured precision parts fur several industrial application such as optics, semiconductors, aerospace and automobile application. Ultrasonic needle horning is widely used in cutting(drilling) of non-conductive, brittle workpiece materials. This paper intends to understanding of the basic mechanism of ultrasonic needle horning. And frequency analysis program is used to easily predict the natural frequency of ultrasonic vibration cutting tools.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.83-89
• /
• 2000

This paper presents a dynamic modeling and a sliding mode controller for the high-speed / high-accuracy position control system. Selected target system is the wire bonder head assembly which is used in semiconductor assembly process. This system is a reciprocating one around the pivot point that consists of VCM(voice coil motor) as a actuator and transducer horn as a bonding tool. For the modeling elements, the system is divided into electrical circuit, magnetic circuit and mechanical system. Each system is modeled by using the bond graph method and united into the full system. Two major aims are considered in the design of the controller. The first one is that the horn must track the given reference trajectory. The second one is that the controller must be realizable by using the DSP board. Computer simulation and experimental results show that the designed sliding mode controller provides better performance than the PID controller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.417-418
• /
• 2008

• Journal of Welding and Joining
• /
• v.26 no.1
• /
• pp.9-11
• /
• 2008

초음파 용접용 혼의 설계에 대한 기본적인 방법과 절차를 설명하였다. 그러나 아직까지 혼의 최적 형상을 구하는 방법은 시행착오(trial-and-error) 방법과 실험 및 설계자의 경험에 많이 의존해야 한다. 또한, 혼의 해석 결과로서 다양한 진동 모드를 얻을 수 있기 때문에 설계자는 이를 분석하고 원하는 진동 모드를 얻을 수 있도록 설계하여야 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.55-56
• /
• 2014

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.580-581
• /
• 2012