참고문헌
- C. A. Mirkin, J. A. Rogers, 2001, Emerging Methods for Micro-and Nanofabrication, MRS Bull., Vol. 26, No. 7, pp. 506-508. https://doi.org/10.1557/mrs2001.121
- J. H. Kim, Y. S. Kim, 2010, The Review for Various Mold Fabrication toward Economical Imprint Lithography, J. Kor. Vac. Soc., Vol. 19, No. 2, pp. 96-104. https://doi.org/10.5757/JKVS.2010.19.2.096
- C. L. Chen, F. Jen, 2004, Fabrication of Polymer Splitter by Micro Hot Embossing Technique, Tamkang J. Sci. Eng., Vol. 7, No. 1, pp. 5-9.
- J. Becker, U. Heim, 2000, Hot Embossing as a Method for the Fabrication of Polymer High Aspect Ratio Structures, Sens. Actuators A, Vol. 83, No. 1-3, pp. 130-135. https://doi.org/10.1016/S0924-4247(00)00296-X
- D. H. Sohn, Y. S. Seo, K. Park, 2010, Three-dimensional Finite Element Analysis of the Induction Heating Procedure of an Injection Mold, Trans. Mater. Proc., Vol. 19, No. 3, pp. 152-159. https://doi.org/10.5228/KSPP.2010.19.3.152
- S. J. Liu, Y. T. Dung, 2005, Hot Embossing Precise Structure onto Plastic Plates by Ultrasonic Vibration, Polym. Eng. Sci., Vol. 45, No.7, pp. 1282-1287.
- H. Mekaru, H. Goto, M. Takahashi, 2007, Development of Ultrasonic Micro Hot Embossing Technology, Microelectron. Eng., Vol. 84, No.5-8, pp. 1282-1287. https://doi.org/10.1016/j.mee.2007.01.235
- J. Tsujino, M. Hongoh, R. Tanaka, R. Onoguchi, T. Ueoka, 2002, Ultrasonic Plastic Welding Using Fundamental and Higher Resonance Frequencies, Ultrason., Vol. 40, No. 1-8, pp. 375-378. https://doi.org/10.1016/S0041-624X(02)00125-7
- Y. S. Seo, K. Park, 2010, Finite Element Analysis of an Ultrasonic Tool Horn for Pattern Forming, J. Kor. Soc. Precis. Eng., Vol. 28, No. 3, pp. 363-369.
- Y. S. Seo, K. Park, 2011, Direct Patterning of Micro-Features on a Polymer Substrate Using Ultrasonic Vibration, Microsys. Technol(accepted for publication).
- R. C. Progelhof, J. L. Throne, 1993, Polymer Engineering Principles: Properties, Processes, Test for Designs, Hanser Gardner Publications, New York.
피인용 문헌
- Replication Characteristics of Micro-Patterns according to the Vibration Transmission Direction in the Ultrasonic Imprinting Process vol.29, pp.11, 2012, https://doi.org/10.7736/KSPE.2012.29.11.1256
- Optimization of Ultrasonic Imprinting Using the Response Surface Method vol.22, pp.1, 2013, https://doi.org/10.5228/KSTP.2013.22.1.36