• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.285-286
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.609-610
• /
• 2010

• 한국음향학회지
• /
• 제20권6호
• /
• pp.57-65
• /
• 2001

본 연구에서는 자왜형 초음파 트랜스듀서의 도파봉을 이론적으로 해석하고 그 타당성을 유한요소 해석법으로 검증하였으며 두 해석법의 결과는 서로 잘 일치하였다. 본 연구에서 유도한 이론적 해석법은 유한요소 해석법에 비해서 빠른 시간 내에 주어진 주파수를 만족시키는 도파봉 길이를 결정할 수 있는 반면, 차단 주파수 (cut-off frequency)를 넘어서는 범위에서만 해석이 가능하다는 단점을 가진다. 해석결과 현수선 도파봉 (catenoidal horn)이 지수함수 도파봉 (exponential horn)에 비해서 더 큰 변위 증폭을 가져왔고, 현수선 형상 길이가 짧을수록 더욱 큰 변위로 증폭시킬 수 있었다. 해석 결과를 바탕으로 공기중에서 공진 주파수 20.8 ㎑를 가지는 자왜형 초음파 트랜스듀서를 제작하여 성능을 측정하였다. 자왜형 트랜스듀서는 수중에서 19.3㎑의 공진 주파수와 199 dB의 최대 SPL (Sound Pressure Level)을 가지고 무지향성의 특성을 보였다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.553-564
• /
• 2010

This paper studies on the rudder shapes for the suppression of the cavitation around a horn-type rudder. To improve the problems due to cavitation, there have been several studies. However, these some studies are recognized as incomplete ways to suppress the rudder cavitation. In this study, the section shapes to suppress the cavitation phenomena are determined by moving the location of maximum thickness for reducing the curvature variation and changing the radius of leading edge. Also, in the pintle part, the curvature radius of the inlet outlet edge of rudder plate is changed. During the design of rudder shape, two-dimensional numerical simulations are firstly performed because those offer some advantages with that cavitation phenomena becomes predictable for a short time, and then the three-dimensional numerical simulations are performed to confirm the determination. The time mean distribution of the propeller slipstream is imposed on the inlet boundary condition. As some results, this paper shows the effects reducing the range of the occurrence of cavitation, and suggests the references on the design of a horn-type rudder for the suppression of cavitation phenomena.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.38-45
• /
• 1996

In recent years, ultrasonic has been widely applied in measurement and industrial fields and its application range has been expanded as a result of continuous research and development. Wire Bonding Machine, an instrument fabricating semi-conductor, makes use of ultrasonic bonding method. Specially, the method utilizes the longitudinal vibration of ultrasonic transducer composed of piezoelectric vibrator and horn. This work investigates the design conditions affecting the dynamic characteristics through the theretical and experimental analysis. It conducts separately the system identification of piezoelectric vibrator in time domain and the modal analysis of horn in frequency domain. The integrated modeling is conducted via a combbination of dynamic identification of piezoelectric vibrator and theroretical analysis of horn. Then comparison is made for theroretical and experimental results of the dynamic characteristics of the ultrasonic transducer comprised of piezoelectric vibrator and horn. Form the results of the comparison we develop the design technique of ultrasonic transducer using dynamic characteristics analysis and propose the possibility of ultrasonic bonding considering the optimal conditions for the longitudinal vibration of ultrasonic transducer and other conditions.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.733-736
• /
• 2005

This paper presents the design of two antennas for the Dual-channel Radiometers for Earth and Atmosphere Monitoring (DREAM) the main payload, will be launched at NARO space center in Korea in 2007. The antennas are designed to meet stringent requirements of a very high beam efficiency, good pattern symmetry, and low VSWR, at 23.8 GHz and 37 GHz bands. Corrugated horn antennas are used. The simulation results of the electrical performance are presented.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.257-260
• /
• 2014

In this paper, a high gain waveguide array antenna combining horn antenna on slot radiator was designed. And the fabricated antenna showed enough gain, improved efficiency and broadband characteristics for receiving satellite signals, compare to conventional microstrip antenna which has dielectric loss and radiation loss on transmission line. For easy fabrication, the waveguide structure was composed by 3-stages of radiator, signal coupler and transmission line. By experiment, the array waveguide antenna of 4 by 16 showed 28.3[dBi] gain and 2:1 of VSWR. And by combining horn antenna structure, the gain was increased 1[dB]. The received signal from Koreasat 6 by measurement showed 16[dBc] of C/N on BS(Broadcasting Satellite)-band and 14[dBc] of C/N on CS(Communication Satellite)-band.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.53-60
• /
• 2004

We have developed and manufactured an experimental ultrasonic polishing machine with frequency of 20kHz at the power of vibration 1.7㎾ for effective ultrasonic polishing in processing of high hardness material. Design of the horn is performed by the FEM analysis. The following conclusions were empirically deduced through experimental results to clarify the major elements which affect the surface roughness during the ultrasonic process by following the experimental plans. The ultrasonic polishing machine has been developed in parts of structure part, ultrasonic generator, vibrator. We were able to process the high hardness material without difficulty as a result of ultrasonic polishing by utilizing the groove added step-type horn. Through analyzing by applying the experimental plans, the rotating speed of the horn was determined to be the major factor in influencing the surface roughness. In the case of ceramic, wafer, we were able to obtain good surface roughness when the feed rate and the ultrasonic output were higher. Because the load on slurry particle increases when the ultrasonic output is higher, the processed surface becomes worse in the case of optical glass.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.613-618
• /
• 2012

The Ultrasonic metal welding is used in the solid-phase welding method at room temperature or low temperature state. In welding process, the high frequency vibration energy is delivered to the welding part under the constant pressure for welding. In this study, we aimed to design and manufacture a 40,000 Hz band horn through finite element analysis. By performing modal analysis and harmonic response analysis, the modal analysis result is that the horn frequency was 39,599Hz and the harmonic response result that the horn frequency was 39,533Hz. These results were similar. In order to observe the designed horn's performance, about 4,000 voltage data was obtained from a light sensor and was analyzed by FFT analysis using Origin Tool. The result RMS amplitude was approximately $8.5{\mu}m$ at 40,000Hz, and maximum amplitude was $12.3{\mu}m$. Using this manufactured horn along with an ultrasonic metal welder and tension tester, the weldability of Cu sheets was evaluated. The maximum tensile force was 66.53 N in the welding condition of 2.0 bar pressure, 60% amplitude, and 0.32 s welding time. In excessive welding conditions, it was revealed that weldability is influenced negatively.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.991-996
• /
• 2013

본 논문에서는 유리와 구리의 이종재료 접합을 위해 고유진동수를 60 [kHz]로 갖는 초음파 혼을 설계하고자 하였다. 초음파 혼의 입력단과 출력단의 단면비, 혼의 길이 등 관계식을 통해 설정하였으며 설계된 혼의 타당성 분석을 위해 모달해석을 수행하였다. 기초실험을 통하여 공정변수 및 반응변수를 설정하였으며, 초음파 공구 혼을 이용하여 이종재료 접합 강도 실험을 실시하였다. 또한 실험 결과를 통해 최적 공정조건을 도출하였다.