• Wind and Structures
• /
• 제26권3호
• /
• pp.179-190
• /
• 2018

Translation of tornadoes is an important feature in replicating the near-ground tornado flow field which has been simulated in previous studies based on Ward-type tornado simulators using relative motion of the ground plane. In this laboratory investigation, effects of translation on the near-ground tornado flow field were studied using the ISU Tornado Simulator that can physically translate over a ground plane. Two translation speeds, 0.15 m/s and 0.50 m/s, that scale up to those corresponding to slowly-moving tornadoes in the field were selected for this study. Compared with the flow field of a stationary tornado, the simulated tornado with translation had an influence on the spatial distribution and magnitude of the horizontal velocities, early reversal of the radial inflow, and expansion of the core radius. Maximum horizontal velocities were observed to occur behind the center of the translating tornado and on the right side of its mean path. An increase in translation speed, resulted in reduction of maximum horizontal velocities at all heights. Comparison of the results with previous studies that used relative motion of the ground plane for simulating translating tornadoes, showed that translation has similar effects on the flow field at smaller radial distances (~2 core radius), but different effects at larger radial distances (~4 core radius). Further, it showed that the effect of translation on velocity profiles is noticeable at and above an elevation of ~0.6 core radius, unlike those in studies based on the relative motion of the ground plane.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.975-976
• /
• 2009

• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.8-15
• /
• 2012

Posterior shoulder muscle tightness is frequently observed in shoulder impingement syndrome because tightness in the posterior portion of the shoulder muscles can cause anterior and superior translation of the humeral head in relation to the glenoid fossa. The purpose of this study was to determine the immediate effects of soft tissue massage on acromiohumeral distance (AHD), anterior translation of the humeral head, and glenohumeral (GH) range of motion (ROM) in subjects with posterior shoulder muscle tightness. Twenty-seven subjects with greater than $10^{\circ}$ difference in the range of GH horizontal adduction between right and left sides were recruited. The range of GH horizontal adduction and internal rotation were measured by a digital inclinometer. The AHD and anterior translation of the humeral head were measured using ultrasonography. A paired t-test was used to compare AHD, anterior translation of the humeral head, and the range of GH horizontal adduction and internal rotation before and after soft tissue massage. The results showed that AHD increased significantly (p<.05) and the anterior translation of humeral head decreased slightly, but not significantly (p=.40) after the soft tissue massage. Furthermore, the ROM of horizontal adduction and internal rotation in the GH joint increased significantly after the soft tissue massage (p<.05). These findings indicate that soft tissue massage on posterior shoulder muscle tightness is an effective method to increase AHD and ROM in the horizontal adduction and internal rotation of the GH joint.

• 대한의용생체공학회:의공학회지
• /
• 제30권6호
• /
• pp.495-502
• /
• 2009

This paper investigated the effects of dynamic postural control for maintaining upright standing on a support surface during continuous sinusoidal horizontal translation in anterior-posterior direction. 15 healthy young subjects participated in this experiment. The analysis of body movement was analyzed using Ariel Performance Analysis System. Motion pattern was analyzed by seven markers on subject's body. Position of markers were head, chest, hip, right knee, left knee, right ankle and left ankle. Seven different frequencies of support surface were employed ; 0.1, 0.25, 0.5, 0.75, 1, 1.5 and 2Hz at 2cm of moving path of motionbase. The experiments were performed dynamic postural reponses at the condition of eye open. The results showed that median frequency of the knee, ankle were increased in all frequency bands. Following the frequency of perturbation increased, postural control strategy was changed from ankle strategy to combined strategy. The experiment results could be applied to the dynamic postural training for the elderly and the rehabilitation training for the patients to improving the ability of postural control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1504-1508
• /
• 2003

The functional behavior of each body segments were investigated with respect to human standing posture when they were exposed to the horizontal vibration in the sagittal plane. This study is processed by experimental approach. The data is analyzed, both in the time domain and in the frequency domain. Random and multisinusoidal vibration was used as input. The ankle, hip, and head were employed as the significant body segments. High relative movements were present between hip and head, and there was no significant relationship between ankle and head. Variations of visual input produced a significant postural effect.

• Imaging Science in Dentistry
• /
• 제31권1호
• /
• pp.23-34
• /
• 2001

Purpose : To develop a new subtraction program for registering digital periapical images based on the correspondence of anatomic structures. Materials and Methods: The digital periapical images were obtained by Digora system with Rinn XCP equipment after translation of 1-16 mm, and rotation of 2-20° at the premolar and molar areas of the human dried mandible. The new subtraction program, NIH Image program and Emago/Advanced program were compared by the peak-signal-to noise ratio (PSNR). Results : The new subtraction program was superior to NIH Images program and Emagol Advanced program up to 16 mm translation and horizontal angulation up to 4°. Conclusion: The new subtraction program can be used for subtracting digital periapical images.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.42-50
• /
• 2013

The reactionary responses to control human standing dynamics were estimated under the assumption that postural complexity mainly occurs in the mid-sagittal plane. During the experiment, the subject was exposed to continuous horizontal perturbation. The ankle and hip joint rotations of the subject mainly contributed to maintaining standing postural control. The designed mobile platform generated anterior/posterior (AP) motion. Non-predictive random translation was used as input for the system. The mean acceleration generated by the platform was measured as $0.44m/s^2$. The measured data were analyzed in the frequency domain by the coherence function and the frequency response function to estimate its dynamic responses. The significant correlation found between the input and output of the postural control system. The frequency response function revealed prominent resonant peaks within its frequency spectrum and magnitude. Subjects behaved as a non-rigid two link inverted pendulum. The analyzed data are consistent with the outcome hypothesized for this study.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.369-382
• /
• 1996

The author performed this study to investige the relationship between condylar movements recorded with Pantronicⓡ and mandibular rotational torque movements with BioEGNⓡ. For this study 56 patients with Temporomandibular disorders(TMD) and 30 dental students without any masticatory signs and symptoms were selected as patients group and control group, respectively. The items recorded with Pantronicⓡ(Denar Corp., USA) were immediate side-shift, progressive side-shift, angle of orbiting path, protrusive path and PRI. BioEGNⓡ(Bioelectric gnathography, Bioresearch Inc., USA) were used to measure the amounts of mandibular rotational torque movements in frontal and horizontal plane, and the distance of mandibular translation at incisal area. Amount of mandibular rotational torque movement depicted between the condyles was automatically analysed by angle and difference in frontal and horizontal plane. The obtained data were processed with SAS program and the conclusion of this study were as follows : 1. Mean values of items between patients group and control group in Pantronic measurements were not significantly different except in left protrusive path and in Pantronic Reproducibility Index(PRI). There were no significant difference of condylar paths by preferred chewing side and affected side between the two groups. 2. The amount of mandibular rotational torque movements were differed in frontal angle and difference on protrusion, and in frontal and in horizontal difference on left excursion between the two groups. But the amounts of translatory movements were actually same on all eccentric movements. 3. The amount of mandibular rotational torque movements with splint mere almost not changed from those without splint, with the exception of in horizontal measurements on protrusion. 4. The correlations of items between in Pantronic measurements and in BioEGN measurements wert not consistently, significant, however, generally the ISS related significantly with horizontal torque movement positively, and with frontal torque movement negatively on the contrary, the PSS showed positive correlation with frontal torque movement, and negative correlation with horizontal torque movement.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.15-29
• /
• 1999

본 연구에서는 GRS-RW 공법의 전면부벽체 배면으로부터 다양한 거리만큼 이격되어 등분포상 재하중이 작용하는 경우, 이러한 인접상재하중의 영향을 고려한 횡토압 예측방법을 한계평형해석에 의해 제시하였으며, GRS-RW 공법의 설계시 참고할 수 있는 예비설계(preliminary design)용 설계 도표를 제시하였다. 제시된 토압 합력의 예측방법은, 전면부벽체 배면으로부터 상재하중이 작용하는 지점까지의 수평거리를 고려할 수 있도록 하였으며, 지진하중 작용시 전면부벽체 및 뒷채움 자중에 의한 수평.연직관성력의 영향을 고려하였다. 아울러. 본 연구제시 해석법은, 점성토뒷채움의 경우에 흔히 적용되는 복합지오텍스타일 보강토공법의 해석시에 추후 적용 가능하도록 점착력이 있는 뒷채움(c-$\phi$ soil)에서 발생 가능한 인장균열의 영향을 고려할 수 있도록 하였다. 본 연구제시 해석방법의 효율성 및 적합성 등을 확인하기 위한 다양한 분석결과, 상재하중 이격거리비가 약 0.60~0.70 이상인 경우에는, 특히 상재하중의 크기 및 설계수평진도가 증가할수록, 또는 보강재의 연직간격이 0.3, 0.4m로 비교적 작은 경우에는, Jarquio의 수정 Boussinesq방정식을 이용한 토압 계산방식의 적용시 불안전측의 설계가 될 수 있는 것으로 나타났다. 본 연구에서 제시된 해석방법은, 전면부벽체의 경사가 연직인 경우로 한정하였다.

• 분석과학
• /
• 제19권5호
• /
• pp.407-414
• /
• 2006

An X-ray diffractometer for spatially resolved X-ray diffraction measurements was developed to identify phase in the narrow (micron-scaled) region of high burn-up fuels and some nuclear materials. The micro-XRD was composed of an X-ray microbeam alignment system and a sample micro translation system instead of a normal slit and a fixed sample stage in a commercial XRD. The X-ray microbeam alignment system was fabricated with a microbeam concentrator having two Ni deposited mirrors, a vertical positioner, and a tilt table for the generation of a concentrated microbeam. The sample micro translation system was made with a sample holder and a horizontal translator, allowing movement of a specimen at $5{\mu}m$ steps. The angular intensity profile of the microbeam generated through a concentrator was symmetric and not distorted. The size of the microbeam was $4,000{\times}20{\mu}m$ and the spatial resolution of the beam was $47{\mu}m$ at the sample position. When the diffraction peaks were measured for a $UO_2$ pellet specimen by this system, the reproducibility ($2{\Theta}={\pm}0.01^{\circ}$) of the peaks was as good as a conventional X-ray diffractometer. For the cross section of oxidized titanium metal, not only $TiO_2$ in an outer layer but also TiO near an oxide-metal interface was observed.